• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권2호
• /
• pp.302-312
• /
• 2013

While displacement type Deep-V mono hulls have superior seakeeping behaviour at speed, catamarans typically have modest behaviour in rough seas. It is therefore a logical progression to combine the superior seakeeping performance of a displacement type Deep-V mono-hull with the high-speed benefits of a catamaran to take the advantages of both hull forms. The displacement Deep-V catamaran concept was developed in Newcastle University and Newcastle University's own multi-purpose research vessel, which was launched in 2011, pushed the design envelope still further with the successful adoption of a novel anti-slamming bulbous bow and tunnel stern for improved efficiency. This paper presents the hullform development of this unique vessel to understand the contribution of the novel bow and stern features on the performance of the Deep-V catamaran. The study is also a further validation of the hull resistance by using advanced numerical analysis methods in conjunction with the model test. An assessment of the numerical predictions of the hull resistance is also made against physical model test results and shows a good agreement between them.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.323-332
• /
• 2014

High-speed marine vehicles can take advantage of aerodynamically supported platforms or air wings to increase maximum speed or transportation efficiency. However, this also results in increased complexity of boat dynamics, especially in the presence of waves and wind gusts. In this study, a mathematical model based on the fully unsteady aerodynamic extreme-ground-effect theory and the hydrodynamic added-mass strip theory is applied for simulating vertical-plane motions of a tunnel hull in a disturbed environment, as well as determining its steady states in calm conditions. Calculated responses of the boat to wind gusts and surface waves are demonstrated. The present model can be used as a supplementary method for preliminary estimations of performance of aerodynamically assisted marine craft.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2017년도 추계학술대회
• /
• pp.232-233
• /
• 2017

본 연구에서는 선미 터널을 적용한 비대칭 고속 쌍동선을 수치해석 기법을 통해 선체의 유체동역학적 성능을 평가하였다. 선미터널 형상은 터널 출구 형상에 경사각에 따라 구분하였으며, 총 3가지 형상($0^{\circ}$, $3^{\circ}$, $6^{\circ}$)을 사용하였다. 결론적으로, 저항성능의 경우, 전 속도 구간에서 $0^{\circ}$ 경사각의 선미터널은 기존 대비 4.8-17.9% 감소한 것을 확인하였다. 하지만 $3^{\circ}$와 $6^{\circ}$경사각을 가진 선미터널은 각각 기존대비 5-14%와 5-29%의 저항이 증가하는 것을 확인하였다. 이와 달리, 트림각의 경우, $0^{\circ}$경사각은 전 속도구간에서 기존선형과 유사한 경향을 보였으나, $3^{\circ}$와 $6^{\circ}$경사각의 경우 각각 FnV=1.54이후에서 평형상태 유지 및 계속적인 감소 형태를 보였다. 이와 같은 형상은 터널 출구 영역에 경사각을 증가하는 것이 저항성능 측면에서 다소 악영향을 발생하지만 운항성능 측면에서는 기존대비 개선됨을 보여준다.

• 대한조선학회논문집
• /
• 제45권6호
• /
• pp.620-630
• /
• 2008

The characteristics of complicated propeller wake influenced by hull wake are investigated by using a two-frame PIV (Particle Image Velocimetry) technique. As the propeller is significantly affected by the hull wake in a real marine vessel, the measurements of propeller wake under the hull wake would be certainly necessary for more reliable validation and the prediction of numerical simulation with wake modeling. Velocity field measurements have been conducted in a medium-size cavitation tunnel with a hull wake. Generally, the hull wake generated by the boundary layer of ship's hull produces the different loading distribution on the propeller blade in both upper and lower propeller planes. The difference of the propeller wake behaviors caused by the hull wake is discussed in terms of axial velocity, vorticity and turbulence kinetic energy distribution in the present study.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권4호
• /
• pp.502-512
• /
• 2013

Simulations of cavitation flow and hull pressure fluctuation for a marine propeller operating behind a hull using the unsteady Reynolds-Averaged Navier-Stokes equations (RANS) are presented. A full hull body submerged under the free surface is modeled in the computational domain to simulate directly the wake field of the ship at the propeller plane. Simulations are performed in design and ballast draught conditions to study the effect of cavitation number. And two propellers with slightly different geometry are simulated to validate the detectability of the numerical simulation. All simulations are performed using a commercial CFD software FLUENT. Cavitation patterns of the simulations show good agreement with the experimental results carried out in Samsung CAvitation Tunnel (SCAT). The simulation results for the hull pressure fluctuation induced by a propeller are also compared with the experimental results showing good agreement in the tendency and amplitude, especially, for the first blade frequency.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.575-576
• /
• 2014

The Hull Mounted Sonar Dome housing the sonar sensor array is a ship's structure protruded from ship bottom, which is under turbulent flow. The flow of sonar surface is highly disturbed and turbulent. In this case the wall pressure fluctuations within the turbulent boundary layer are one of the most important flow induced self noise sources of the SONAR system. We investigate the characteristics of the wall pressure fluctuations of the hull mounted sonar dome through the model test in the cavitation tunnel. This paper contains the wall pressure fluctuation spectra at various free stream velocities.

• 대한조선학회지
• /
• 제25권3호
• /
• pp.13-18
• /
• 1988

Three-dimensional turbulent flows over ship sterns are measured by using the hot-wire anemometer and static holes in the wind tunnel. A conventional stern and a barge-type stern are adopted for the present study. Three components of mean velocities, pressures on the hull and six components of Reynolds stresses are measured. Longitudinal velocity contours are more parallel to the hull surface and weak bilge vortices appear on the barges type stern rather than the conventional stern. Those viscous flow patterns may have close relations to improvements of the resistance and propulsion performance, which have been verified in the towing tests. Measured data files are valuable for the ensuing numerical studies.

• Journal of Ship and Ocean Technology
• /
• 제7권2호
• /
• pp.40-47
• /
• 2003

LDV measurements in large cavitation tunnel around a propeller in operation are carried out to provide valuable information for more accurate wake-adapted propeller design and to study hull-propeller interactions. Effective velocities are computed by both the simplified vortex ring method and by RANS solver with the body force representing the propeller load. The former method uses the nominal velocities measured at the propeller plane as an input data of the numerical method and shows a better agreement with experimental data. The latter shows the qualitative agreement and may be used as an alternative design tools in the preliminary design stage.

• Journal of Hydrospace Technology
• /
• 제1권1호
• /
• pp.41-56
• /
• 1995

Flew control devices, such as flow liners, are frequently introduced in a cavitation tunnel in order to reduce the tunnel blockage effect, when a three-dimensional wake distribution is simulated using a complete ship model or a dummy model. In order to estimate the tunnel wall effect and to evaluate the effect of flow liners on the simulated wake distribution, a surface panel method is adopted for the calculation of the flow around a ship model and flow liners installed in a rectangular test section off cavitation tunnel. Calculation results on the Sydney Express ship model show that the tunnel wall effect on the hull surface pressure distribution is negligible for less than 5% blockage and can be appreciable for more than 20% blockage. The flow liners accelerate the flow near the afterbody of the ship model, so that the pressure gradient there becomes more favorable and accordingly the boundary layer thickness would be reduced. Since the resulting wake distribution is assumed to resemble the full scale wake, flow liners can also be used to simulate an estimated full scale wake without modifying the ship model. Boundary taper calculation should be incorporated in order to correlate the calculated wake distribution with the measured one.

• 대한조선학회논문집
• /
• 제54권6호
• /
• pp.515-521
• /
• 2017

Large Cavitation Tunnel (LCT) of KRISO enables us to conduct cavitation tests of the propeller attached to a ship model. As the ship model tests are done at rather high Reynolds number of 107~108, flow measurement system such as pitot tube cannot be employed because of structural safety problems in its system and difficulties in installing it within the test section. Thus, KRISO has developed new 3-D LDV system used in large test section of LCT. There are several difficulties in using 3-D LDV, which did not allow efficient operation of it. The first trouble was the calibration using the conventional pin hole. To make the focus with same laser-beam waists at the wanted position, the high spatial resolution CCD is utilized in the calibration procedure for 3-D LDV. The off-axis configuration provides two velocity components in the horizontal plane and on-axis configuration gives third velocity component in the vertical plane. The horizontal velocity components are also obtained in the coincidence mode, which prevents any misleading results in the off-axis configuration. The nominal wake of Aframax tanker model is measured by the developed 3-D LDV system. The measured hull wake showed good agreement with that obtained by CFD calculation.