• 한국군사과학기술학회지
• /
• 제16권3호
• /
• pp.285-294
• /
• 2013

In this paper, we present a tunable BPF with a novel structure. The filter is very useful to optimization of low frequency filter performance, because the fiilter has air-coils and tuning screws. This filter also has the merits of light weight and small size in comparison with conventional tunable filter at low frequency. This type filters are especially suitable for switched filter bank due to tuning structure. We designed 4 channel filter bank with two SP4Ts and 4 BPFs using novel structure. Tuning processes were subsequently executed. We obtained satisfactory performances as a result; consequently, the validity of our proposal was proved.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.1121-1124
• /
• 1999

Linear motor is able to produce line movement without rotary-to-line converter at the system required line moving. Thus Linear motor has no gear, screw, belt for line movement. Therefore it has some advantage which decrease friction loss, noise, vibration, maintenance effort and prevent decay of control performance due to backlash. This paper proposes the estimation method of unknown parameters from the BLDC Linear motor and determine the PI controller gain through this estimation. Each control movement that is current, speed, position control, and PWM wave generation is performed on Processor, which is DSP(Digital Signal Processor), having high speed performance. PI theory is adopted to each for controller for control behavior More fast convergence to command position is accomplished by applying the new velocity locus which derived from position error.

• Structural Engineering and Mechanics
• /
• 제72권6호
• /
• pp.747-762
• /
• 2019

Based on the ball-screw mechanism, a tuned viscous mass damper (TVMD) has been proposed, which has functions of amplifying physical mass of the system and frequency tuning. Considering the sensitivity of a single TVMD's effectiveness to frequency mistuning like that of the conventional tuned mass damper (TMD) and according to the concept of the conventional multiple tuned mass damper (MTMD), in the present paper, multiple tuned mass viscous dampers (MTVMD) consisting of many tuned mass dampers (TVMD) with a uniform distribution of natural frequencies are considered for attenuating undesirable vibration of a structure. The MTVMD is manufactured by keeping the stiffness and damping constant and varying the mass associated with the lead of the ball-screw type inerter element in the damper. The structure is represented by its mode-generalized system in a specific vibration mode controlled using the mode reduced-order method. Modal properties and fundamental characteristics of the MTVMD-structure system are investigated analytically with the parameters, i.e., the frequency band, the average damping ratio, the tuning frequency ratio, the total number of TVMD and the total mass ratio. It is found that there exists an optimum set of the parameters that makes the frequency response curve of the structure flattened with smaller amplitudes in a wider input frequency range. The effectiveness and robustness of the MTVMD are also discussed in comparison with those of the usual single TVMD (STVMD) and the results shows that the MTVMD is more effective and robust with the same level of total mass.

• 한국정보전자통신기술학회논문지
• /
• 제13권6호
• /
• pp.483-488
• /
• 2020

최근에는 수요자의 다양한 요구를 충족하는 서비스를 제공하기 위해서 여러 개의 무선통신 시스템을 하나로 통합한 무선기기에 대한 수요가 증가하고 있다. 다양한 무선통신 시스템으로 구성된 무선기기에는 많은 주파수 고정형 필터가 필요하다. 주파수 가변 필터는 다수의 주파수 고정형 필터를 대체할 수 있으며, 주파수 가변 필터를 사용하면 시스템을 보다 효율적으로 구성할 수 있다. 본 논문에서는 800 ~ 2400MHz 대역에서 동작하는 3-폴 주파수 가변 대역통과필터(BPF)를 설계하였다. 주파수 가변범위를 넓히기 위해서 튜닝 스크류는 스텝을 갖도록 설계하였고, 튜닝 스크류의 조절을 용이하게 하기 위해서 리니어 모터를 사용하였다. 구현한 주파수 가변 BPF는 설계한 주파수 범위에서 동작하며, 삽입손실은 최대 2.82dB, 중심주파수에서 ± 50MHz 이격된 지점에서 최소 18.7dB의 감쇠 성능을 갖는다.

• Structural Engineering and Mechanics
• /
• 제26권3호
• /
• pp.343-361
• /
• 2007

This article presents a numerical tool for dimensioning two-threaded fasteners connecting prismatic parts subjected to fatigue tension loads that are coplanar with the screw axis. A simplified numerical model is developed from unidirectional finite elements, modeling the connected parts and screws with bent elements and the elastic contact layer between the parts with springs. An algorithm updating the contact stiffness matrix, calculating forces and displacements at each node of the structure and thus normal stresses in the screws in both static and fatigue is further developed using C language. An experimental study is also conducted in parallel with the numerical approach to validate the developed model assumptions, the numerical model and the 3D finite element results. Since stiffness values for the compressive zones in the parts are analytically difficult to determine, a statistical software method is used, from which a tuning factor is derived for identifying these stiffness values. The method is also applied to set out the influence of each parameter on the fatigue behaviour of each screw. Finally, the developed model will be used to establish a new, sophisticated, fast and accurate tool for dimensioning bolted mechanical structures.

• 전기학회논문지
• /
• 제56권3호
• /
• pp.604-610
• /
• 2007

Injection molding is the most common method of shaping plastic resins for manufacturing a variety of parts. This injection molding is accomplished by injection molding machines (IMM) which consists of a hewer, a reciprocating screw, barrel assembly, and an injection nozzle. The plastic resin is fed to the machine through the hopper and it should be heated to the target melting temperature, which depends on material properties, as closely as possible with very small temperature overshoot in the barrel. Since the barrel, which has temperature dependent specific heat and thermal conductivity in the operating temperature range, is heated by the several electric heater bands, it is not an easy task to control the temperature of the barrel owing to the interference of neighboring heaters and its material properties. Though PID controller with auto-tuning capability is widely adopted in the nm, the auto-tuning process should be carried out whenever the operating temperature is changed significantly. Recently, though the predictive controller is developed and shows good performance, it has drawbacks: 1. Since the heat transfer modeling process is very complicated and should be carried out again when the barrel is changed, it is somewhat inappropriate in the field. 2. The controller performance is not validated in whole operating temperature range. In this paper, cascade type simple PI controller with input restriction is proposed to find the possibility of controlling the barrel temperature in the whole operating temperature range. It is shown by experiment that the proposed controller shows good performance. This result can be applied to design of PI controller with auto-tuning capability.

• 전자공학회논문지A
• /
• 제29A권11호
• /
• pp.49-56
• /
• 1992

In this paper a band-pass filter using dielectric resonators with tuning screw and spacer at Ku-band is designed and constructed. For the filter design and construction, the coupling coefficient K between two resonators is numberically evaluated. The external quality factor Q$_{ex}$ is also calculated with a microstrip line which is necessary for the field excitation of dielectric resonator. The coupling between dielectric resonator and microstrip line depends mainly upon the magnetic field and is principal parameter in band-pass filter. The Q$_{ex}$ and K data which are evaluated by numberical analysis are practically applied to the filter construction. The theoretical Band-pass filter responses are given by Chebyshev approximation and they are nearly similar to the experimental results.

• 비파괴검사학회지
• /
• 제24권5호
• /
• pp.508-517
• /
• 2004

근접장의 특성과 근접장 마이크로파 현미경의 배경이론을 설명하였고 유전체 공진기 제작에 앞서 HFSS (high frequency structure simulator)를 이용한 모의 시뮬레이션을 기술하였다. 이것을 바탕으로 원통형 유전체 공진기를 제작하여 금속탐침과 결합한 근접장 마이크로파 현미경(near field scanning microwave microscope : NSMM)을 구성하였다. 제작한 유전체 공진기의 특성은 HFSS를 이용하여 모의 실험한 결과와 비교하였다 Tip의 기하학적 모양에 따른 공간분해능과 감도(sensitivity)를 연구하였고 contrast가 가장 좋은 hybrid tip을 개발하였다. 전도도가 서로 다른 금속시료에 따른 NSMM의 반사계수의 변화를 측정하였고 실험결과와 이론적 시료의 임피던스를 비교하였다. 마지막으로 유전체 공진기를 이용한 NSMM으로 공간 분해능이 $1{\mu}m$의 Cr과 NiFe 패턴의 이미지를 비접촉, 비파괴방법으로 얻었다.