• 한국인터넷방송통신학회논문지
• /
• 제14권2호
• /
• pp.147-152
• /
• 2014

2단으로 구성된 DFB 레이저의 정적 및 동적 작용을 분석하기 위하여 종방향 모드 전송선로 이론 (L-MTLT)을 이용하였다. 활성영역을 갖는 DFB 구조의 특성 임피던스와 등가 전파상수를 L-MTLT에 기초하여 유도하였다. 2단으로 구성된 DFB 레이저가 전송선로 망으로 유사화 되었으며, 각 단은 그에 대응하는 등가 요소들로 등가화된 전송선로 블록으로 나타내었다. 등가 전송선로 망에 기초한 DFB 레이저의 종방향 공진 조건 (resonance condition)이 레이트 방정식 (rate equation)을 재구성하기 위하여 사용되었으며, 이를 이용하여 활성여역을 갖는 2단 DFB 레이저의 정적 및 동적 작용을 자세하게 분석하였다.

• Journal of the Optical Society of Korea
• /
• 제8권1호
• /
• pp.13-16
• /
• 2004

A widely tunable SG-DFB (Sampled Grating Distributed Feedback) laser diode is proposed and its feasibility is confirmed through simulation. The new SG-DFB laser diode is composed of a pair of sampled gratings, some parts of which are gain sections and the other parts of which are phase control sections. It is shown that a few tens of nanometers can be tuned through the adjustment of two currents into the phase control sections. Higher output power is expected compared with a SG-DBR laser diode with similar parameters. The dynamic single mode operation is also observed in the time-domain simulation.

• 광산업정보
• /
• 통권1호
• /
• pp.61-61
• /
• 2000

• 산업기술연구
• /
• 제16권
• /
• pp.147-155
• /
• 1996

There is a considerable interest in tunable DFB-LD for their use in OFDM and coherent optical communications. In this paper, A modeling of ${\lambda}/4$-shifted tunable wavelength three electrode DFB-LD was performed considering the spatial hole burning within a laser diode cavity. The modeling will show design paramenters' requirement for high-speed and broad bandwidth lasers. The simulations of modeling prove that the continuous tuning range is about 3nm and the SMSR is about several dB. We showed that the optical power and carrier density distribution along z for several dc current with SHB. It was shown that prove that optical power and carrier density along cavity are changed and thismeans that modeling is correct.

• 한국광학회지
• /
• 제11권6호
• /
• pp.429-433
• /
• 2000

본 논문에서는 광섬유 브래그 격자를 공진기로 사용하는 파장 가변 광섬유 DFB레이저를 구현하였다 사용된 광섬유 브래그 격자는 3cm의 $Er^{3+}$ 첨가 광섬유에 새겨졌고 브래그 공명파장은 1559.4nm이다 단일모드 동작과 낮은 문턱 펌프를 위해 UV재조사 방법을 통하여 $\lambda/4$ 위상천이를 주었다. 제작된 레이저는 $230\muW$ 파워의 단일 모드 발진을 하며 35kHz의 선폭을 갖는다. 또한 광섬유 격자를 PZT로 조절하는 광섬유 인장기로 인장하여 레이저의 발진파장을 3nm까지 가변할 수 있었다.

• ETRI Journal
• /
• 제45권2호
• /
• pp.193-202
• /
• 2023

We demonstrate the transmission of uncompressed 4K videos over the photonics-based terahertz (THz) wireless link using a directly modulated distributed feedback laser diode (DFB-LD). For optical heterodyne mixing and data modulation, a DFB-LD was employed and directly modulated with a 5.94-Gb/s non-return-to-zero signal, which is related to a 6G-serial digital interface standard to support ultra-high-definition video resolution. We derived the optimal frequency of the THz carrier by varying the wavelength difference between DFB-LD output and Tunable LD output in the THz signal transmitter to obtain the best transmission performances of the uncompressed 4K video signals. Furthermore, we exploited the negative laser-to-filter detuning for the adiabatic chirp management of the DFB-LD by the intentional discrepancy between the center wavelength of the optical band-pass filter and the output wavelength of the DFB-LD. With the help of the abovementioned methods, we successfully transmitted uncompressed 4K video signals over the 2.3-m wireless transmission distance without black frames induced by time synchronization error.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 하계학술발표회
• /
• pp.86-87
• /
• 2003

단일 소자로 외부의 제어회로를 통해 여러 파장으로 발진파장을 제어할 수 있는 파장가변 레이저 다이오드는 고정된 파장으로 발진하는 레이저 다이오드에 비해 여러 경제적 이점을 가지며 보다 유연한 광 네트워크의 구성이 가능하게 한다. 이러한 이유로 현재까지 다양한 구조의 파장가변 레이저 다이오드가 제안되고 개발되어 왔다. 본 논문에서는 새로운 구조의 광대역 파장가변 레이저 다이오드를 제안하였다. (중략)

• 청정기술
• /
• 제22권3호
• /
• pp.203-207
• /
• 2016

Here, we report a novel fabrication technique for patchable organic lasing sheet based on non-volatile liquid organic semiconductors and freestanding polymeric film with high flexibility and patchability. For this work, we have fabricated the second-order DFB grating structure, which leads to surface emission, embedded in the freestanding polymeric film. Using an ultra-violet (UV) curable polyurethaneacrylate (PUA) mixture, the periodic DFB grating structure can be easily prepared on the freestanding polymeric film via a simple UV curing process. Due to unsaturated acrylate remained in the PUA mixture after UV curing, the freestanding PUA film provides adhesive properties, which enable mounting of the patchable organic lasing sheet onto non-flat surfaces with conformal contact. To achieve laser actions in the freestanding resonator structure, a composite material of liquid 9-(2-ethylhexyl)carbazole (EHCz) and organic laser dyes was used as the laser medium. Since the degraded active materials can be easily refreshed by a simple injection of the liquid composite, such a non-volatile liquid organic semiconducting medium has degradation-free and recyclable characteristics in addition to other strong advantages including tunable optoelectronic responses, solvent-free processing, and ultimate mechanical flexibility and uniformity. Lasing properties of the patchable organic lasing sheet were also investigated after mounting onto non-flat surfaces, showing a mechanical tunability of laser emission under variable surface curvature. It is anticipated that these results will be applied to the development of various patchable optoelectronic applications for light-emitting displays, sensors and data communications.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.97-103
• /
• 2006

This work forcus on the development of gas sensor that measure the concentrations of exhaust gas using diode laser. Each diode laser for exhaust gas measurement is set to work at near-IR using both DA and WMS methods. Also use of fiber-coupled optical elements makes such a sensor rugged and easy to align. On-line data acquisition and processing can be performed with a PC running LabVIEW software, and absorption signals are measured simultaneously by multiplexing method. Finally, It were experimentally compared WMS (Wavelength Modulation Spectroscopy) with DA (Direct Absorption) for the accuracy.

• 한국연소학회지
• /
• 제9권3호
• /
• pp.27-35
• /
• 2004

Diode laser absorption sensors are advantageous because they may provide fast, sensitive, absolute, and selective measurements of species concentration. These systems are very attractive for practical applications owing to its compactness, resonable cost, robustness, and ease of use. In addition, diode lasers are fiber-optic compatible and thus enable simultaneous measurements of multiple species along a line-of-sight. Recent advances of room-temperature, near-IR and visible diode laser sources for telecommunication, optical data storage applications make it possible to be applied for combustion diagnostics based on diode laser absorption spectroscopy. Therefore, combined with fiber-optics and high sensitive detection strategies, compact and portable sensor systems are now appearing for variety of applications. The objectives of this research are to develope a new gas sensing system and to verify feasibility of this system. Wavelength and power characteristics as a function of injection current and temperature are experimentally found out. Direct absorption spectroscopy has been demonstrated in these experiments and has a bright prospect to this diode laser system.