• Journal of the Korean Data and Information Science Society
• /
• v.18 no.2
• /
• pp.525-534
• /
• 2007

It is a common practice in many research areas that multiple range tests for a between subject factor such as Tukey are applied to a within subject factor in a repeated measures design. Tukey procedure, however, sometimes detects no pairs with different means even when the hypothesis of all equal level means is rejected. This study attempts to provide a rationale for the proposition that Tukey is inappropriate post hoc procedure for a within subject factor in which the observations are correlated. We introduce two multiple range tests, Bonferroni and Scheffe, for a within subject factor and show that Bonferroni is more appropriate than Scheffe for pairwise multiple comparisons. Subsequent simulation study indicates that Tukey has significantly less power than Bonferroni in detecting actual difference between means of some pairs when the observations of a within subject factor are highly correlated.

• The Korean Journal of Applied Statistics
• /
• v.2 no.1
• /
• pp.18-34
• /
• 1989

The problem of simultaneously estimating the pairwise differences of means of four independent normal populations with equal variances is considered. A statistical computing procedure involving a trivariate t density constructs the exact confidence intervals with simultaneous co verage probability equal to $1-\alpha$. For equal sample sizes, the new procedure is the same as the Tukey studentized range procedure. With unequal sample sizes, in the sense of efficiency for confidence interval lengths and experimentwise error rates, the procedure is superior to the various generalized Tukey procedures.

• Communications for Statistical Applications and Methods
• /
• v.24 no.6
• /
• pp.627-640
• /
• 2017

A common interest in gene expression data analysis is to identify genes that present significant changes in expression levels among biological experimental conditions. In this paper, we develop a Bayesian approach to make a gene-by-gene comparison in the case with a control and more than one treatment experimental condition. The proposed approach is within a Bayesian framework with a Dirichlet process prior. The comparison procedure is based on a model selection procedure developed using the discreteness of the Dirichlet process and its representation via Polya urn scheme. The posterior probabilities for models considered are calculated using a Gibbs sampling algorithm. A numerical simulation study is conducted to understand and compare the performance of the proposed method in relation to usual methods based on analysis of variance (ANOVA) followed by a Tukey test. The comparison among methods is made in terms of a true positive rate and false discovery rate. We find that proposed method outperforms the other methods based on ANOVA followed by a Tukey test. We also apply the methodologies to a publicly available data set on Plasmodium falciparum protein.

• Communications for Statistical Applications and Methods
• /
• v.16 no.1
• /
• pp.75-83
• /
• 2009

Parallelism tests are proposed for slope in the simple linear regression models. In this paper, we suggest the parametric test using HSD testing method (Tukey,1953) and distribution-free test using Kruskal-wallis (1952) for more than three slopes. Monte Carlo simulation study is adapted to compare the power of the proposed methods with Wilks' Lambda multivariate procedure.

• The Korean Journal of Applied Statistics
• /
• v.30 no.6
• /
• pp.1027-1036
• /
• 2017

Multiple comparisons are required to confirm whether or not something is significant if the null hypothesis to test whether the difference between more than three treatments is rejected in a one-way layout. There are both parametric multiple comparison method Tukey (1953) and Nonparametric multiple comparison method based on Kruskal-Wallis (1952).This procedure is applied to a mixed sample of all data and then an average ranking is used for each of three or more treatments. In this paper, a new nonparametric multiple comparison procedure based on joint placements for a one-way layout as extension of the joint placements described in Chung and Kim (2007) was proposed. Monte Carlo simulation is also adapted to compare the family wise error rate (FWE) and the power of the proposed method with previous methods.

• Communications for Statistical Applications and Methods
• /
• v.19 no.4
• /
• pp.591-595
• /
• 2012

We frequently use Tukey's boxplot to identify outliers in the batch of observations of the continuous variable. In doing so, we implicitly assume that the underlying distribution belongs to the family of normal distributions. Such a practice of data handling is often superficial and improper, since in reality too many variables manifest the skewness. In this short paper, we build a modified boxplot and set the outlier identification procedure by assuming that the observations are generated from the skew normal distribution (Azzalini, 1985), which is an extension of the normal distribution. Statistical performance of the proposed procedure is examined with simulated datasets.

• Clinics in Shoulder and Elbow
• /
• v.25 no.1
• /
• pp.42-48
• /
• 2022

Background: Total shoulder arthroplasty (TSA) has been demonstrated to be an effective treatment for multiple shoulder pathologies. The purpose of our study was to compare the relative value units (RVUs) per minute of surgical time for primary and revision TSA. Methods: The American College of Surgeons National Surgical Quality Improvement Program database was queried to identify patients that underwent primary TSA, one-component revision TSA, and two-component revision TSA between January 1, 2015 and December 31, 2017 using current procedure terminology codes. RVUs were divided by mean operative time for each procedure to determine the amount of revenue generated per minute. Rates were compared between the groups using a one-way analysis of variance with post-hoc Tukey test. Statistical significance was set at p<0.05. Results: When dividing compensation by surgical time, we found that two-component revision generated more compensation per minute compared to primary TSA (0.284±0.114 vs. 0.239±0.278 RVU per minute or $10.25±$4.11 vs. $8.64±$10.05 per minute, respectively; p=0.001). Conclusions: The relative value of revision TSA procedures is weighted to account for the increased technical challenges and time associated with these procedures. This study confirms that reimbursement is higher for revision TSA compared to primary TSA.

• The Journal of Advanced Prosthodontics
• /
• v.3 no.4
• /
• pp.177-185
• /
• 2011

PURPOSE. The aim of this study was to evaluate the effect of dimensional stability of splinting material on the accuracy of master casts. MATERIALS AND METHODS. A stainless steel metal model with 6 implants embedded was used as a master model. Implant level impressions were made after square impression copings were splinted using 5 different techniques as follows. (1) Splinted with autopolymerizing resin and sectioned, reconnected to compensate polymerization shrinkage before the impression procedure. (2) Splinted with autopolymerizing resin just before impression procedure. (3) Primary impression made with impression plaster and secondary impression were made over with polyether impression material. (4) Splinted with impression plaster. (5) Splinted with VPS bite registration material. From master model, 5 impressions and 5 experimental casts, total 25 casts were made for each of 5 splinting methods. The distortion values of each splinting methods were measured using coordinate measuring machine, capable of recordings in the x-, y-, z- axes. A one-way analysis of variance (ANOVA) at a confidence level of 95% was used to evaluate the data and Tukey's studentized range test was used to determine significant differences between the groups. RESULTS. Group 1 showed best accuracy followed by Group 3 & 4. Group 2 and 5 showed relatively larger distortion value than other groups. No significant difference was found between group 3, 4, 5 in x-axis, group 2, 3, 4 in y-axis and group 1, 3, 4, 5 in z-axis (P<.0001). CONCLUSION. Both Splinting impression copings with autopolymerizing resin following compensation of polymerization shrinkage and splinting method with impression plaster can enhance the accuracy of master cast and impression plaster can be used simple and effective splinting material for implant impression procedure.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.4
• /
• pp.257-264
• /
• 2017

PURPOSE. To evaluate the adhesion to CAD/CAM feldspathic blocks by failure analysis and shear bond strength test (SBSt) of different restorative systems and different surface treatments, for purpose of moderate chipping repair. MATERIALS AND METHODS. A self-adhering flowable composite (Vertise Flow, Kerr) containing bi-functional phosphate monomers and a conventional flowable resin composite (Premise Flow, Kerr) applied with and without adhesive system (Optibond Solo Plus, Kerr) were combined with three different surface treatments (Hydrofluoric Acid Etching, Sandblasting, combination of both) for repairing feldspathic ceramics. Two commercial systems for ceramic repairing were tested as controls (Porcelain Repair Kit, Ultradent, and CoJet System, 3M). SBSt was performed and failure mode was evaluated using a digital microscope. A One-Way ANOVA (Tukey test for post hoc) was applied to the SBSt data and the Fisher's Exact Test was applied to the failure analysis data. RESULTS. The use of resin systems containing bi-functional phosphate monomers combined with hydrofluoric acid etching of the ceramic surface gave the highest values in terms of bond strength and of more favorable failure modalities. CONCLUSION. The simplified repairing method based on self-adhering flowable resin combined with the use of hydrofluoric acid etching showed high bond strength values and a favorable failure mode. Repairing of ceramic chipping with a self-adhering flowable resin associated with hydrofluoric acid etching showed high bond strength with a less time consuming and technique-sensitive procedure compared to standard procedure.

• Restorative Dentistry and Endodontics
• /
• v.39 no.4
• /
• pp.303-309
• /
• 2014

Objectives: Hydrogen peroxide ($H_2O_2$) surface treatment of fiber posts has been reported to increase bond strength of fiber posts to resin cements. However, residual oxygen radicals might jeopardize the bonding procedure. This study examined the effect of three antioxidant agents on the bond strength of fiber posts to conventional and self-adhesive resin cements. Materials and Methods: Post spaces were prepared in forty human maxillary second premolars. Posts were divided into five groups of 8 each: G1 (control), no pre-treatment; G2, 10% $H_2O_2$ pre-treatment; G3, G4 and G5. After $H_2O_2$ application, Hesperidin (HES), Sodium Ascorbate (SA) or Rosmarinic acid (RA) was applied on each group respectively. In each group four posts were cemented with Duo-Link conventional resin cement and the others with self-adhesive BisCem cement. Push-out test was performed and data were analyzed using 2-way ANOVA and tukey's post-hoc test (${\alpha}=0.05$). Results: There was a statistically significant interaction between the cement type and post surface treatment on push-out bond strength of fiber posts (p < 0.001, F = 16). Also it was shown that different posts' surface treatments significantly affect the push-out bond strength of fiber posts (p = 0.001). $H_2O_2$ treated posts (G2) and control posts (G1) cemented with Duo-link showed the highest ($15.96{\pm}5.07MPa$) and lowest bond strengths ($6.79{\pm}3.94$) respectively. Conclusions: It was concluded that $H_2O_2$ surface treatment might enhance the bond strength of fiber posts cemented with conventional resin cements. The effect of antioxidants as post's surface treatment agents depends on the characteristics of resin cements used for bonding procedure.