• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.1
• /
• pp.107-113
• /
• 2010

The criteria of tugboat requirement in domestic trading ports have been determined by the administrator of regional maritime affairs and port office on the basis of the regulations for the tugboat operations and management. But, there is a little confusion that the criteria of tugboat requirement and method for calculation of them are different from port to port and total power calculated on the basis of power per tugboat requirements by the number of tugs is not in accordance with total required power for the use of tug in several ports. The comparison of tugboat requirements among domestic major ports showed that it should be necessary for the criteria to be made in unified form. Because the current criteria are only on the basis q the ordinary condition with wind velocity under 10m/s, the criteria on the condition of the wind velocity over 10m/s are suggested to be necessary for the precautions against a disaster such as unexpected strong winds or typhoon.

• Journal of Korean Port Research
• /
• v.10 no.1
• /
• pp.1-14
• /
• 1996

Rapid change in the technological environment of marine transportation and the development of the ocean shipping industry have fostered a revolution in the port system. This in turn has caused major changes in the function and use of port in Korea. Aside from this, Mokpo Port, however continues to decline, because the existing port facilities and related subsystem are already obsolete with no chance of regaining operational effectiveness and treatment for proper implementation. Although a few studies have been done on the Mokpo Port, has not been found, any reseach for the analytical approach to the transportation system of it. This paper aims to make an extensive analysis of the physical distribution system in Mokpo Port focusing on the coordination of subsystems such as navigational aids system. The base of introduced simulation tool here is the queueing theory. The overall findings are as follows: 1. Among those vessels called at Mokpo Port in 1994, 556 ships(2,736,669 G/T) are oceangoing while 8155 ships(2,587,217 G/T) are domestic. The average size of oceangoing vessels is 4,922,1 G/T, and the domestic is 317,8 G/T. The average arrival interval and service time of the domestic vessels are 6.0 hours and 24.1 hours respectively marking the berth occupation rate over 100%. Those for oceangoing vessels are 34.5 hours, 120.0 hours and 37.2%. In order to maintainin the berth occupation rate to 70% the capacity considering the 1994 of domestic piers must be extended to 145% and oceangoing vessels must be increased to 165%. 2. The capacity of approaching channel is enough to handle the total traffic volume of 3. Tugs are sufficiently being provided to handle all ships requiring their services 4. The capacity of storage and inland transportation systems are sufficient to handle the throughput and the yard stroage utilization rate of No.1 - No.5 is 4.5% and No.6 is 30% of 1993's. 5. The utilization rate of LLC(Level Looping Crane) and PNT(PNeumaTic) are 2.7% and 18.8%, respectively.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.81-87
• /
• 2004

It includes the considerable concentration and dangerousness as the peculiar work of a pilot and dock-master to berthing/deberthing the big object as for the ship within the port or the ship yard. A tug utilization is getting increased in this berthing/deberthing work and the own ship is affected a lot by external force due to moving with low advance speed. In this study, we constructed the 2 dimension virtual system which can conduct the berthing/deberthing manoeuvring work by using mainly tugs in a external force, particularly strong wind. Also, propose objective standard that could estimate the degree of manoeuvring difficulty, and conducted simulation experiment for this. we analyzed correlations between the subjective estimation which is described numerically the decreased dangerousness and the objective index which is related to the main parameter regarding manoeuvring by using this simulator from the result of conducting simulation experiment. And then we discussed the estimation technique of manoeuvring difficulty.

• Journal of Navigation and Port Research
• /
• v.29 no.3 s.99
• /
• pp.189-194
• /
• 2005

The berthing/deberthing manoeuvring operation is the peculiar work owned to the marine pilot and the dock master. So, in the port or the shipyard, the berthing/deberthing manoeuvring operation requires considerable concentration and bears dangerousness. In that situation, a tug utilization is getting increased and the external forces have an effect on the own ship because of moving with low advance speed. In this study, we constructed the 2-dimensional virtual ship manoeuvring simulator system with which we can carry out the berthing/deberthing manoeuvring operation by using tugs in the external forces such as strong wind. And then, we propose the objective indexes by which the degree of manoeuvring difficulty evaluated. Using the present system, we carry out manoeuvring simulation experiment in order to grasp correlation between the objective indexes proposed here and the def{ree of manoeuvring difficulty felt by operator. Lastly, we discuss the evaluation technique of manoeuvring difficulty.

• Journal of the Korean Institute of Navigation
• /
• v.15 no.1
• /
• pp.12-47
• /
• 1991

This work aims to introduce the concept of microcomputer aided port design simulation methodology including the analysis of the mathematical models to be implemented and apply it to the Third Stage Busan Port Development Project. In the Busan case study, the size of the proposed turning basin of the new terminal, together with the operational strategies of berthing and unberthing, was examined, In addition, the safety on ship's entry and exit through the projected new breakwaters was ascertained. From the application of simulation to the Busan project, it was found that the proposed dredging area was not sufficiently wide enough for the modelled container ship to perform A time unberthing (in which the ship turns to port as she manoeuvres away from N.1. Berth with the assistance of tugs), especially in a strong easterly wind. It is therefore, recommended that Busan pilots should be advised to sue B type unberthing strategy, in which the ship goes astern from no.1 berth tot he turning area in front of No.2 berth(where the ship turns 180 degrees clockwise), especially when the wind is very strong, It is also recommended that a sea buoy be placed outside the new breakwaters, as this was found to improve the safety of ship manoeuvres through the breakwaters significantly . Another recommendation is that the Korean hydrodynamic Office carry out a detailed survey of the currents in the water area near the new breakwaters once they have been constructed. In addition, it is to be recommended that a current meter be placed at the recommended sea buoy to improve the safety of ship manoeuvres which could otherwise be jeopardised by eeroneos current information.

• Journal of Korea Port Economic Association
• /
• v.25 no.3
• /
• pp.67-92
• /
• 2009

A tugboat (tug) is a boat that maneuvers vessels by pushing or towing them. Tugs move vessels that should not move themselves alone, such as ships in a crowded harbor or a narrow canal, or those that cannot move themselves, such as barges, disabled ships, or oil platforms. Tugboats are powerful for their size and strongly built, some are ocean-going. Historically tugboats were the first seagoing vessels to receive steam propulsion, freedom from the restraint of the wind, and capability of going in any direction. As such, they were employed in harbors to assist ships in docking and departure. Towage is in essence a service by one vessel to another vessel for a fixed remuneration. The most common reason for requiring this service is the lack of its own motive power. Conventionally, towage is defined as "the employment of one vessel to expedite the voyage of another, when nothing more is required than the accelerating of her progress". Apart from accelerating vessels, acquiring towage service is a common practice for towing barges, platform of drilling oil, floating ship yards, etc.

• Journal of Korean Port Research
• /
• v.11 no.2
• /
• pp.321-337
• /
• 1997

Rapid change in the technological environment of marine transportation and the development of the ocean shipping industry have fostered a revolution in the port system. This in turn has caused major changes in the function and use of port in Korea. Aside from this. Mokpo Port, however continues to decline, because the existing port facilities and related subsystem are already obsolete with no chance of regaining operational effectiveness and treatment for proper implementation. Although a few studies have been done on the Mokpo Port, has not been found, any reseach for the analytical approach to the transportation system of it. This paper aims to make an extensive analysis of the physical distribution system in Mokpo Port focusing on the coordination of subsystems such as navigational aids system, quay handling and transfer system, storage system and inland transport system. The base of introduced simulation tool here is the queueing theory. The overall findings are as follows; 1. Among those vessels called at Mokpo Port in 1994, the average size of oceangoing vessels is 4,922.1 G/T, and the domestic is 317.8 G/T. The average arrival interval and service time of the domestic vessels are 6.0 hours and 24.1 hours respectively marking the berth occupation rate over 100%. Those for oceangoing vessels are 34.5 hours, 120.0 hours and 37.2%. In order to maintainin the berth occupation rate to 70% the capacity considering the 1994 of domestic piers must be extended to 145% and oceangoing vessels must be increased to 165% year called. 2. The capacity of approaching channel is enough to handle the total traffic volume. 3. Tugs are sufficiently being provided to handle all ships requiring their services 4. The capacity of storage and inland transportation systems are sufficient to handle the throughput and the yard stroage utilization rate of No.1 $\cdots$ No.5 is 4.5% and No.6 1S 30% of 1993's. 5. The utilization rate of LLc(Level Looping Crane) and PNT(PNeumaTic) are 2.7% and 18.8%, respectively. Practical solution and proposal for improvement of Transportation System in Mokpo Port are as follows; 1. To avoid the congestion in domestic pier introduction of a new port operation system is necessary allowing the domestic vessel to use the oceangoing pier. 2. To establish the port management information system to improve the efficiency of port operation. 3. To build a new storage system for high valued cargos including modernization of the present storage and handling system. 4. To insure the safety of navigation in approaching channel, The Vessel Traffic System including separation scheme is introduced. 5. To interest enormously on public relation to ship owner's association, shippers and consignees by showing that they can save cost and ship turnaround time in order to promote the call to Mokpo Port. At last, to be strategically change the function of Mokpo Port to the Leisure, Fishing & Ferry as well as Maritime port.