• Journal of KSNVE
• /
• v.5 no.1
• /
• pp.95-106
• /
• 1995

Flow-induced vibration in heat exchanger (or fuel rod) in nuclar power plant can cause dynamic interactions between tubes and tube supports resulting in fretting-wear. To increase the reliability and design life of heat exchanger components, design criteria that establish acceptable limits of vibration and minimize fretting wear are necessary. The fretting-wear rate is dependent upon material combination, contact configuration, environmental conditions and tube-to tube support dynamic interaction. It is demostrated that the fretting -wear rate correlates well with tube-to-support contact force or work rate. The tube-to-support dynamic interaction, which consists of dynamic contact forces and tube motion, is used to relate single-span wear data to real heat exchanger configurations consisting of multi-span tube bundles. This paper describes the test facility to measure tube-to-support dynamic impact force and reports its dynamic characteristics through the four impact tests - a force transduces independent and external impact tests, central ring inside impact test and additional cylinder impact test. Through the tests the impact parameter change dependent upon the material difference of impacting ball is studied, and the impact parameters of Force Transducer Assembly components are measured. And also the dynamic behavior of Force Transducer Assembly is analyzed. The force measurement technique herein is shown to provide a reasonable measure of dynamic contact forces.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.6
• /
• pp.461-465
• /
• 2007

There have been 3E problems of energy, economy and environment since the earth has its history. Especially, the energy and environment problems have been getting serious after the modem industry revolution. Therefore, the demand of gas as an eco-friendly energy source is getting increased. With the demand of gas, the installation and use of gas boiler is also increased, so human life injury by the waste gas(CO) of boiler goes on increasing every year. It is the content about a life of the exhaust tube which is used at Gas boiler in this paper. We explain also the course to apply the 6SC(6 Step Creativity)of practical TRIZ and evaluate the resolution.

• Journal of Institute of Convergence Technology
• /
• v.2 no.2
• /
• pp.13-19
• /
• 2012

This Design research is a design of rescue equipment combined with beach garbage can for prompt rescue at the time of the accident in water. As a usual, it is used as garbage can hanging a garbage bag on the holders located in both sides, and it can be used to rescue drowning men promptly taking out a rescue tube located inside of the equipment at the time of the accident in water. Support is consisted of beach one, wall-hanging one and pipe one, and it could be installed to match the situation because it can be combined with all main frames. As a usual, it is used as garbage can in seaside, but it can be used to rescue drowning men promptly taking out a rescue tube after pulling the handle located in front of main frame at the time of the accident in water, and it can be used to pull drowning men out of the water because rope is kept in rescue tube.

• Journal of Fashion Business
• /
• v.27 no.4
• /
• pp.50-66
• /
• 2023

The purpose of this study was to examine the word distribution and topic distribution of slow fashion appearing on YouTube in detail and identify the characteristics and aspects related to fashion design through big data analysis and content analysis methods. The specific research results were as follows. First, in the results of the word distribution analysis, "item" appeared the most, 203 times. Also, "one-piece" was a point to pay attention to, as the item had the highest frequency. Second, a total of 5 topics were defined in the topic distribution analysis: topic 1 was "vintage products," topic 2 was "fashion items," topic 3 was "eco-friendly," topic 4 was "life quality emphasis," and topic 5 was "prudent consumption." Third, looking at the relationship between word distribution and topic distribution above, Korean slow fashion on YouTube was actively selecting related design elements that express vintage images in clothing life regardless of trends. In addition, there was a tendency to pursue various basic and high-quality items. Other than those findings, basic items tended to be reinterpreted in various ways through styling methods matched to the vintage image. Lastly, the tendency of slow and small-volume production appeared to emphasize handicrafts and the cultural values of fashion products.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.122-128
• /
• 2022

Minimization of human casualties in disaster situations is of paramount importance. In particular, if a marine disaster occurs, it can be directly connected to human casualties, so prompt action is needed. In the event of a marine disaster, the route and location of movement should be identified and life tubes should be used to float on the water. This paper designs and proposes an emergency IoT notification system that can quickly rescue drowning people. The maritime emergency IoT notification system consists of four main types. First, an emergency IoT device that detects the expansion of the life tube and delivers location and situation information to the emergency IoT notification server. Second, an emergency IoT web server that manages emergency information and provides notification. Third, a database server that stores and manages emergency IoT notification information. And finally, an emergency notification app that can receive and respond to emergency notification information. The emergency IoT device consists of a TPMS(Tube Pressure Monitoring System) device that checks the pressure value of the TPMS in real time and sends it to the IoT device, and an IoT device that sends the rescuer's voice information and emergency information to the emergency IoT server. Emergency information is delivered using the MQTT(Message Queuing Telemetry Transport) protocol, and voice information is delivered to the IoT server as HTTP FormData.

• The Journal of the Korean dental association
• /
• v.57 no.12
• /
• pp.728-735
• /
• 2019

Objective: Previous studies suggested the potential influence of YouTube videos regarding dentistry on the mass population. However, there was not any clear investigation for Korean population. We aimed to systemically analyze the type of the dentistry-related videos uploaded on YouTube Korea and the accounts used for uploading, and to assess their effect on the view count of the content. Methods: Classification, type of the accounts, and view count of the videos listed by the keyword 'dentistry' were analyzed, which were uploaded on YouTube Korea platform from September 2017 to April 2019. Kruskal-Wallis test with post hoc analysis was used to assess the effect of the classification of the videos and the type of accounts on the view count. Results: 1.026 videos were enrolled to the analysis. Primary classification of the videos was information/education, advertisement, life, news, child contents, autonomous sensory meridian response, broadcast, cartoon/game, humor, and music. Secondary classification of the videos was dental experience, advertisement, role-playing, information/education., humor, cartoon/game, child contents, life, and broadcast. Type of the accounts was dentistry associates, general public, media company, and government office (sorted by frequency). Subject of the most videos (93.6%) was general public. There was statistically significance in the view count of the videos according to the primary and secondary classifications, the account used for uploading, and target subject of the videos. Conclusion: Dentists and their associates should recognize the importance of YouTube platform and try to monitor and intervene the dentistry-related contents, considering its huge impact on the general public.

• Applied Science and Convergence Technology
• /
• v.24 no.5
• /
• pp.125-131
• /
• 2015

We investigated the thermal characteristics of rotating anode X-ray tube to develop it for digital radiography by using computer simulation. The target which is the area of the anode struck by electrons is the most important component to get a long life of X-ray tube. So we analyze the thermal characteristics of the target and rotor assembly according to their emissivity by using ANSYS transient thermal simulation and then compare with the measured data of the target temperature operating in aging process of X-ray tube. Especially, keeping the lead coated layer as the role of metal lubricant on ball bearing enables to prevent the noise in rotating anode. The simulation result showed that its temperature was under the melting point of the lead in X-ray tube for digital radiography with 1.2 mm large focal spot 0.6 mm small focal spot and 150 kV tube voltage. We also investigated the relationship between the diameter of the anode shaft and the temperature of the anode and rotor assembly. It has been confirmed that the smaller anode shaft could be good for the rotor thermal characteristics.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.834-839
• /
• 2001

Calandria tube wrapping each pressure tube is one of the key structural components of CANDU reactor(Calandria) which is consisted of many pressure tubes containing nuclear fuel assemblies. As the Calandria tube(made of zirconium alloy) is sagging due to its thermal and irradiation creep during the plant operation, it possibly contacts with liquid injection nozzle crossing beneath the Calandria tube, which subsequently results in difficulties on the safe operation. It is therefore necessary to check the gap for the confirmation of no contacts between the two tubes, Calandria tube and liquid injection tube, with a proper measure during the life of plant. In this study, an ultrasonic measurement method was selected among several methods investigated. The ultrasonic device being developed for the measurement of the gap was introduced and its preliminary performance test results were presented here. The gap between LIN and CT at site was measured using by this ultrasonic device at site.

• Korean Journal of Adult Nursing
• /
• v.26 no.5
• /
• pp.592-602
• /
• 2014

Purpose: This study was to provide understanding about the meaning of nasogastric tube feeding experiences by the cerebral stoke patients with dysphagia. Methods: Data were collected through a face to face interview from five cerebral stroke patients who had dysphagia along with a nasogastric tube insertion. The contents of the interviews were analyzed using the hermeneutics phenomenological method developed by van Manen. Results: The experience of having a nasogastric tube was not only limited to physical problems but also was linked to other psychological problems. Many patients reported that they tolerated the nasogastric tube in order to overcome the stroke along with the desire to eventually take food orally. The essential themes associated with the experience of nasogastric tube insertion were: "The loss of pleasure from food", "The loss of human relationship from surrounding table", "Cower and shrink from the different appearance to others" and "Acceptance for life in painful experiences". Conclusion: This study would highlights the importance of not only physical focused care but also psychological and social aspects. Therefore, nurses should consider all factors when providing nursing care to stroke patient with nasogastric tube feeding.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.7 no.1
• /
• pp.35-40
• /
• 2011

If a plugged tube in a steam generator is broken, it may damage nearby intact tubes. To prevent this damage, it is recommended that a stabilizer is installed into the plugged tube. However, the installation cost of a stabilizer is very high. So studies are required to determine the conditions on which the installation is necessary. For this purpose static loads and dynamic loads applied on a tube should be known to estimate the residual strength and remaining fatigue and wear life of a plugged tube. Two-dimensional and three-dimensional computational fluid dynamics (CFD) analyses are performed to obtain the drag coefficient for cross flow to a tube. Using the obtained drag coefficient, the static load can be estimated and the residual strength of a plugged tube can be calculated. An inclined flow problem is also analyzed and the vertical and horizontal forces are obtained and discussed.