• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.1
• /
• pp.68-75
• /
• 2015

In this paper, unsteady characteristics of pressure in solid rocket motor were analyzed by using response of pintle actuation, pressure and thrust data from ground test. Pressure and thrust in solid rocket motor can be controlled in real time by varying nozzle throat area with pintle, installed in the valve. Unsteady characteristics of pressure can be observed in this system occurred by various reasons. Two critical reasons, error of pintle actuation and ablation of center tube, are found and effects of each reason can be analyzed individually by re-prediction of pressure with response of pintle actuation and analyzing thrust to pressure ratio.

• Korean Journal Plant Pathology
• /
• v.3 no.2
• /
• pp.100-107
• /
• 1987

Pre-pentration activity of Pyricularia oryzae Cav. from the stage of conidia germination to appressorium formation was examined on rice leaf epidermis under light and scanning electron microscopes to determine the causes· for differences in blast susceptibility between plants grown under three different soil moisture conditions in the greenhouse. No significant differences were found in the external shape of leaf epidermal cells including bulliform cells between plants grown under different soil moisture conditions. Growth and orientation of germ tube and morphology and size of appressorium of P. oryzae did not vary with soil moisture treatment. Site of appressorium formation was consistent over soil moisture treatment with the highest frequency of bulliform cell $(35\~48\%)$, followed by short cell $(19\~27\%)$, and long and guard cells $(13\~20\%)$. No appressorium was formed on trichome. This result suggests that the observed differences in blast susceptibility between plants grown under different soil moisture conditions were not due to the differences in the pre-pentration activity of P. oryzae on those plants.

• Transactions of Materials Processing
• /
• v.17 no.5
• /
• pp.364-372
• /
• 2008

In this study, the circumferential creep behaviors ofpilgered advanced Zirconium alloy tubes such as Zr-Nb-O and Zr-Nb-Sn-Fe were investigated in the temperature range of $400\sim500^{\circ}C$ and in the stress range of 80$\sim$150MPa. The test results indicate that the stress exponent for the steady-state creep rate of the Zr-Nb-Sn-Fe alloy decreases with the increase of stress(from 6$\sim$7 to 4), while that of the Zr-Nb-O alloy is nearly independent of stress(5$\sim$6). The activation energy of creep deformation is found to be nearly the same as the activation energy for Zr self diffusion. This indicates that the creep deformation may be controlled by dislocation climb mechanism in Zr-Nb-O. On the other hand, the transition of stress exponent(from 6-7 to 4) in Zr-Nb Sn-Fe strongly suggests the transition of the rate controlling mechanism at high stresses. The lower stress exponent at high stresses in Zr-Nb-Sn-Fe can be explained by the dynamic deformation aging effect caused by interaction of dislocations with Sn substitutional atoms.

• Journal of the Korean Ceramic Society
• /
• v.41 no.3
• /
• pp.229-234
• /
• 2004

In this study, we proposed new forming process for a porous ceramic body with unique pore structure. h tubular-type porous NiO-YSZ body with radially aligned pore channels was prepared by freeze-drying of aqueous slurry. A NiO-YSZ slurry was poured into the mold, which was designed to control the crystallization direction of the ice, followed by freezing. Thereafter the ice was sublimated at a reduced pressure. SEM observations revealed that the NiO-YSZ porous body showed aligned large pore channels parallel to the ice growth direction, and fine pores are formed around the outer surface of the tube. It was considered that the difference in the ice growth rate during the freezing process resulted in such a characteristic microstructure. Bilayer consisting of dense thin electrolyte film of YSZ onto the tubular type porous body has been successfully fabricated using a slurry-coating process followed by co-firing. It was regarded that the obtained bilayer structure is suitable for constructing electrode-support type electrochemical devices such as solid oxide fuel cells.

• Fire Science and Engineering
• /
• v.23 no.1
• /
• pp.55-62
• /
• 2009

A general combustion characteristics of forcing nonpremixed jet in laminar flow rates have been conducted experimentally to investigate the effect of forcing amplitude with the resonant frequency of fuel tube. There are two patterns of the flame lift-off feature according to the velocity increasing; one has the decreasing values of forcing amplitude on the lift-off occurrence when a fuel exit velocity is increasing, while the other has the increasing values. These mean that there are the different mechanisms in the lift-off stability of forced jet diffusion flame. Especially, the characteristics of attached jet flame regime are concentrically observed with flame lengths, shapes, flow response and velocity profiles at the nozzle exit as the central figure. The notable observations are that the flame enlogation, in-homing flame and the occurrence of a vortical motion turnabout have happened according to the increase of forcing amplitude. It is understood by the velocity measurements and visualization methods that these phenomena have been relevance to an entrainment of surrounding oxygen into the fuel nozzle as the negative part of the fluctuating velocity has begun at the inner part of the fuel nozzle.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.3
• /
• pp.15-21
• /
• 2003

This experimental study describes the propagation characteristics of the impulse noise emitted from the exit of a perforated pipe attached to the open end of a simple shock tube facility. The pressure amplitudes and directivities of the impulse wave propagating outside from the exit of pipe with several different configurations are measured and analyzed for the range of the incident weak shock wave Mach number between 1.02 and 1.2. In the experiments. the impulse waves are visualized by a Schlieren optical system for the purpose of understanding their propagation characteristics. The results obtained show that for the near sound field the impulse noise strongly propagates toward the pipe axis, but for the far sound field the impulse noise uniformly propagates toward the omnidirections, indicating that the directivity pattern is almost same regardless of the pipe type. For this non-directivity in the far sound field, it is shown that the perforated pipe has little performance to suppress the impulse noise.

• Journal of Digital Convergence
• /
• v.11 no.3
• /
• pp.95-100
• /
• 2013

K-POP is getting population at the all over the world. K-POP is based on the hook song that made using repetitive lyrics and melody. The characteristics of the music is a bit simple and cheerful rhythm and melody easy to sing along, interesting lyrics and great dance skills. K-POP is spreading to various countries via various social networking services such as YouTube, Facebook, Twitter. K-POP dominated by the digital music market, showed a growing tendency to shorten the length of music, to create a music that can give a strong impression. And 60 second pre-listening function increased music used the chorus in the first part. But it was generated the result that made obscures the configuration of the music and the meaning of the lyrics. In this paper, we study the characteristics of K-POP music and will present three directions of the hook song music production. Finally, we compared to Kangnamstyle of Psy using the proposed three standards.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.91-91
• /
• 2010

현재 나노크기의 나노소자에 대한 관심과 연구가 활발히 진행 중에 있고, 나노소자 제작을 위한 나노구조체 연구에도 탄력을 받고 있다. 나노구조체 연구 중에서도 탄소나노튜브(CNT)와 실리콘이 많이 연구되고 있으나 CNT의 경우 금속과 반도체 등 전기적 특성이 혼재되어 분리기술이 필요하며, 실리콘 기반의 나노구조체들은 공기 중에 노출되었을 경우 자연 산화막 생성에 대한 문제점들이 대두되고 있다. 이러한 기존 나노구조체들의 문제점들을 극복하기 위해 산화물 계열의($InO_3$, ZnO와 $SnO_2$ 등) 나노구조체들이 화학, 광학 및 생화학 센서등의 다양한 응용 연구들이 진행되고 있다. 본 연구에서는 thermal evaporation법으로 tube furnace 장비를 이용하여 온도($500{\sim}900^{\circ}C$)변화에 따른 ZnO nanorod를 성장시켰다. 성장된 ZnO nanorod의 구조적 특성을 확인하기 위하여 전계방출주사전자현미경(SEM)을 측정한 결과 ZnO nanorod들은 직경 50~80nm, 길이는 400~1000nm 이상까지 다양한 직경과 길이를 가지고 성장되었으며 $800^{\circ}C$ 에서 성장된 ZnO nanorod가 가장 곧고 이상적인 nanorod의 형태를 이루는 것을 확인할 수 있었다. Nanorod는 온도가 높아질수록 nanowire로 성장됨에 따라 본 연구에서 $800^{\circ}C$ 에서는 nanorod형태를 이루고 있으나 $900^{\circ}C$에서부터 nanowire의 형태로 성장되었다. 또한 성장된 ZnO nanorod들의 X-선 회절패턴(XRD)을 측정 결과 ZnO의 (002) 우선 배양성 때문에 성장된 nanorod 또한 (002) 방향으로 성장되었음을 확인하였다. 이 연구를 통하여 온도를 조절함으로서 ZnO nanorod의 성장제어가 가능함을 확인하였고, 특성 분석을 통하여 발광소자, Solar Cell로의 응용가능성을 확인하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.75-75
• /
• 2015

오염원과 취수장이 동일 구간 내에 공존하는 국내하천의 특성상, 하천 평면 내에서 오염물의 거동 및 혼합 특성을 보다 정확하게 해석하기 위해서는 2차원 이송-분산 모형의 적용이 필요하다. 이를 위해서는 2차원 모형의 주요 매개변수인 종분산계수와 횡분산계수의 적절한 입력이 매우 중요하다. 하지만 국내외적으로 횡분산계수에 대한 연구는 많이 진행된 반면, 현재까지 종분산계수에 대한 연구는 충분히 이루어지지 않은 실정이다. 분산계수를 결정하는 방법에는 실측된 농도 자료의 유무에 따라 크게 두 가지로 분류된다. 실측된 농도 자료가 없는 경우, 이론식이나 경험식을 이용하는 방법이 있다. 반면에 추적자 실험 등을 수행하여 실측된 농도 자료가 있는 경우, 모멘트법 또는 추적법을 적용하여 농도-시간 분포 곡선으로부터 분산계수를 계산하는 것이다. 모멘트법은 임의 지점에서 농도의 횡분포를 통해 얻을 수 있는 2차 모멘트의 종방향 변화율이 횡분산계수와 비례한다는 원리를 이용한 것이며, 추적법은 상류부의 관측된 농도를 입력자료로 하여 하류부의 농도를 계산한 후 계산된 농도와 실측된 하류부 농도의 비교를 통해 분산계수를 산정하는 방법이다. 본 연구에서는 불규칙한 단면 형상을 가지는 자연하천에서의 2차원 종 횡분산계수를 산정하기 위해서 Baek & Seo(2010)가 제안한 2차원 유관추적법(2D Stream-tube Routing Procedure)을 적용하였다. 본 연구에서는 국내 자연하천 중 다양한 사행형태를 갖으며 수질오염 사고의 위험이 높은 구간을 선정하고, 추적자로서 Rhodamine WT를 이용하여 현장실험을 수행하였다. 실험에서 수집된 수리량 및 농도자료로부터 추적자의 2차원적 거동을 분석하였으며, 2차원 유관추적법을 적용하여 종분산계수를 산정하였다. 그 결과 하폭 대 수심비(W/H)와 마찰손실관련 무차원변수(U/U*)의 증가에 따라 종분산계수가 증가됨을 확인 할 수 있었다. 본 연구에서 산출된 종분산계수와 선행 연구에서 수집된 자료를 이용하여 추정식을 개발하였다. 차원해석을 통해 무차원 종분산계수에 영향을 미치는 무차원 인자를 선별하고 회귀분석을 이용하여 종분산계수 추정식을 유도하였다. 추정식을 이용하여 산정한 종분산계수의 범위는 Elder (1959)가 제안한 이론값보다 약 10배 정도로 크게 나타났다. 혼합 특성이 밝혀지지 않은 자연하천에 2차원 확산모형을 적용하고자 할 때 본 연구에서 개발된 추정식으로부터 계산된 종분산계수를 사용할 수 있을 것이다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.8
• /
• pp.599-606
• /
• 2019

The pulse gun device is designed to identify the transverse pressure wave propagation/damping mechanism into the combustion flow field and in the combustion chamber according to the arrangement of multiple injectors. The manufactured pulse gun was tested to verify operability at the target combustion pressure and control of the pressure wave intensity. Gas nitrogen was used to pressurize the high-pressure tube and an OHP film of $100{\mu}m$ thickness was used for the diaphragm. To check the speed and intensity of the pressure waves, the dynamic and static pressure were measured using the pressure transducer. The performance test confirmed that the manufactured pulse gun can generate pressure waves with transverse characteristics that can be controled for strength depending on the supply pressure.