• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2004년도 춘계학술발표회
• /
• pp.113-119
• /
• 2004

A steel plated is typically composed of plate panels. The overall failure of the structure is certainly affected and can be governed by the bulking and plastic collapse of these individual members In the ultimate limit state design. therefore. a primary task is to accurately calculate the budding and plastic collapse strength of such structural members. Structural elements making up steel palated structures do not work separately. resulting in high degree of redundancy and complexity in contrast to those of steel framed structures. To enable the behavior of such structures to be analyzed, simplifications or idealizations must essentially be made considering the accuracy need and degree of complexity of the analysis to be used Generally the more complex the analysis the greater is the accuracy that may be obtained. The aim of this study is the investigation of the effect of the tripping behaviour including section characteristic for a plate under uniaxial compression.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1407-1409
• /
• 1999

Distance relay is being used for transmission line protection. Recently, current differential relay is used with high reliability in power system. This kind of relay is reported that it has a reliable detection ability, even so high impedance faults take place in transmission line. Therefore it is expected to use and expand widely in many utilities. Tripping of the relay is decided according to the difference between differential and restraint current. However the tripping criterion can be changed by the manufacturers. This paper presents an operational scheme of current differential relay for transmission line protection with graphical model. It is developed for educational purpose for students interesting in power system and protection engineer in utility. MATLAB is used to establish the models.

• 한국지능시스템학회논문지
• /
• 제8권5호
• /
• pp.72-82
• /
• 1998

Power transformer protective relay should block the tripping during magnetizing imrush and rapidly operate the tripping during internal faults. But traditional approaches maloperate in the case of magnetizing inrush with low second harmonic component and internal faults with high second harmounic component. To enhance the fault detection sensitivities of conventional technuques, flux-differential current derivative curve by fuzzy theory approaches is used. This paper deals with fuzzy logic based protective relaying for power transformer. The proposed fuzzy based relaying algorithm consisits of flux-differential current derivative curve, harmonics restraint, and precentage differential characteristic curv. The proposed relaying was tested with relaying signals obtained from Salford EMTP simulation package and showed a fast and accurate trip operation.

• 전기학회논문지P
• /
• 제57권3호
• /
• pp.296-301
• /
• 2008

This paper presents a study on the ground fault protection in 6.6KV ungrounded power system relay(SGR) malfunction or non-tripping. Ground test had made on 6.6KV HV(high voltage) system, Some of domestic and oversea's SGR products are different from their own specific characteristics. This study on the ground protection relay 6.6KV power supply system is focused to protect human.

• 대한전기학회논문지
• /
• 제39권2호
• /
• pp.111-118
• /
• 1990

This paper presents a new algorithm of contingency analysis and countermeasure to alleviate the line overloads for electric power systems. In this algorithm, the inverse matrix of the new Jacobian matrix when a contingency occurs, in fastly calculated using the house-holder's Inverse Matrix Modification Lamma (IMML) with the original factor table. The generation outputs are firstly adjusted to alleviate all line overloads occurred by the contingency without tripping loads. If the generation adjustment is not enough anymore to alleviate line overloads, then the control of bus injection power is recommended to quickly alleviate remaining overloads with minimum amount of load tripping and generation read-justing at the termination busbars of the overload lines. The proposed algorithm has been validated in tests on the 6 busbar test system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1688-1690
• /
• 2002

The unpredictable threat of lightning surge is ever increasing in today's low-voltage power supplies. Thus Surge protection devices for AC mains are more widely used. The false-tripping of the earth leakage breaker (ELB) can be caused by the installation of surge protection devices with MOV. In order to examine the cause of malfunction, the malfunction characteristics of ELBs applied by lightning surge were investigated experimentally. As a result, all of them brought about malfunctions under 7 kV of the impulse voltage. The suitable position of MOV and use of zener diode were suggested to eliminate the problems.

• KIEE International Transactions on Power Engineering
• /
• 제2A권4호
• /
• pp.153-159
• /
• 2002

Power transformer protective relay should block the tripping during magnetizing inrush and rapidly operate the tripping during internal faults. Recently, the frequency environment of power system has been made more complicated and the quantity of 2nd frequency component in inrush state has been decreased because of the improvement of core steel. And then, traditional approaches will likely be maloperate in the case of magnetizing inrush with low second harmonic component and internal faults with high second harmonic component. This paper proposes a new relaying algorithm to enhance the fault detection sensitivities of conventional techniques by using a fuzzy logic approach. The proposed fuzzy based relaying algorithm consists of flux-differential current derivative curve, harmonic restraint, and percentage differential characteristic curve. The proposed relaying was tested with relaying signals obtained from EMTP simulation package and showed a fast and accurate trip operation.

• 조명전기설비학회논문지
• /
• 제20권2호
• /
• pp.68-74
• /
• 2006

고조파 전류에 의한 배선용 차단기 오동작 및 원인불명 동작이 보고되고 있으나 고조파 전류에 의한 배선용 차단기 동작을 설명할 수 있는 자료가 없는 실정이다. 본 논문에서는 네 가지 형태의 배선용 차단기(열동식, 열동 전자식, 완전 전자식 및 전자식)에 대해 고조파 전류의 영향을 시험하였다. 실험 결과 정격전류 이하의 고조파가 포함된 시험 전류에서는 어떤 종류의 배선용 차단기에서도 오동작은 발생하지 않았다. 그리고 다양한 고조파 부하 조건에서 열동식과 열동 전자식의 경우 제조사의 동작 시간에 별다른 영향을 보이지 않았다. 그러나 완전 전자식 차단기는 과부하 조건에서 고조파 전류가 증가할 수 록 동작 시간이 점차 둔화되었고 이는 케이블 과열을 야기할 수 있을 것이다. 따라서 고조파 전류가 심한 곳에서는 완전 전자식 배선용 차단기의 사용을 피해야 할 것이다.

• 한국안전학회지
• /
• 제30권5호
• /
• pp.8-13
• /
• 2015

Molded Case Circuit Breakers (MCCBs) are typically used to provide over current protection for electrical safety caused by short circuit faults and overloads in indoor low voltage power systems. The MCCB automatically connects and disconnects loads from the electrical source when the current reaches a value and duration that will cause an excessive. However, the MCCB sometimes is not interrupted due to a malfunction, nuisance tripping, or in a fire. Ensuring electrical safety is very important in a indoor low voltage power system. This paper presents the operating characteristics of MCCBs according to a temperature rise from room temperature to 160 degrees Celsius delivered by a radiant panel heater. The ABS 54c(rated current: 30A) of the hydraulic magnetic trip type was used in the experiments. The signals of temperature, voltage, and current were measured using the high accuracy Signal Conditioning Extensions for Instrumentation (SCXI) measurement system with the LabVIEW program manufactured by National Instruments. The operating characteristics were measured as functions of current amplitude and ramp-up rate. The MCCB tripping time decreased as a result of increasing current amplitude and ramp-up rate under a temperature rise condition, because the temperature and level of the current are directly proportional to the tripping time. Additionally, an instantaneous operation was observed after 8 times of the rated current, and the MCCB began to melt a surface temperature of around 300 degrees Celsius of. The experimental results coincided well with the operating curve.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 춘계학술대회 논문집
• /
• pp.89-94
• /
• 2004

일반적으로 강구조물을 복잡한 판넬로 구성되어 있다. 구조의 전체적인 붕괴는 각각의 구성요소들의 좌굴과 소성붕괴에 영향을 받는다. 최종한계상태설계법에서는 어떤 구조적인 구성요소들의 좌굴과 소성붕괴에 대한 정확한 계산은 중요하다. 구조물은 개별적 요소로 구성되어 있지 않으며 고차 부정정 자유도를 가진 복잡한 구조이다. 이러한 구조물을 해석하기 위해서 단순화나 이상화를 통하여서 가능하며 일반적으로 복잡한 부정정 구조의 해석에 사용되어지고 있다. 본연구의 목적은 일축압축하중이 작용할 경우에 보강재의 트리핑이 최종강도에 미치는 영향을 규명하는 것이며 또한 보강재 단면의 특성에 따른 트리핑거동을 탄소성대변형 유한요소법을 이용하여 해석하였다.