• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.6
• /
• pp.80-88
• /
• 2008

In this paper, the block cipher algorithms, 3-DES(Triple Data Encryption Standard), AES(Advanced Encryption Standard), SEED, HASH(SHA-1), which are domestic and international standards, have been implemented as an integrated cryptographic engine for smart card applications. For small area and low power design which are essential requirements for portable devices, arithmetic resources are shared for iteration steps in each algorithm, and a two-level clock gating technique was used to reduce the dynamic power consumption. The integrated cryptographic engine was verified with ALTERA Excalbur EPXA10F1020C device, requiring 7,729 LEs(Logic Elements) and 512 Bytes ROM, and its maximum clock speed was 24.83 MHz. When designed by using Samsung 0.18 um STD130 standard cell library, the engine consisted of 44,452 gates and had up to 50 MHz operation clock speed. It was estimated to consume 2.96 mW, 3.03 mW, 2.63 mW, 7.06 mW power at 3-DES, AES, SEED, SHA-1 modes respectively when operating at 25 MHz clock. We found that it has better area-power optimized structure than other existing designs for smart cards and various embedded security systems.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.1
• /
• pp.7-13
• /
• 2020

Purpose: This study was to evaluate marginal and internal discrepancy of 3-unit fixed dental prostheses (FDP) fabricated by subtractive manufacturing and additive manufacturing. Materials and methods: 3-unit bridge abutments without the maxillary left second premolar were prepared (reference model) and the reference model scan data was obtained using an intraoral scanner. 3-unit fixed dental prostheses were fabricated in the following three ways: Milled 3-unit FDP (MIL), digital light processing (DLP) 3D printed 3-unit FDP (D3P), stereolithography apparatus (SLA) 3D printed 3-unit FDP (S3P). To evaluate the marginal/internal discrepancy and precision of the prosthesis, scan data were superimposed by the triple-scan protocol and the combinations calculator, respectively. Quantitative and qualitative analysis was performed using root mean square (RMS) value and color difference map in 3D analysis program (Geomagic control X). Statistical analysis was performed using the Kruskal-Wallis test (α=.05), MannWhitney U test and Bonferroni correction (α=.05/3=.017). Results: The marginal discrepancy of S3P group was superior to MIL and D3P groups, and MIL and D3P groups were similar. The D3P and S3P groups showed better internal discrepancy than the MIL group, and there was no significant difference between the D3P and S3P groups. The precision was excellent in the order of MIL, S3P, and D3P groups. Conclusion: Within the limitation of this study, the 3-unit fixed dental prostheses fabricated by additive manufacturing showed better marginal and internal discrepancy than the those of fabricated by subtractive manufacturing, but the precision was poor.

• Economic and Environmental Geology
• /
• v.41 no.1
• /
• pp.81-92
• /
• 2008

Fonualei Rift and Spreading Center(FRSC) and Mangatolu Triple function(MTJ) caldera are located in northeastern part of Lau basin which is the active back-arc basin. Deep-tow and surface-tow magnetic surveys are carried out in FRSC. In deep-tow magnetic survey, to compensate for influence of uneven distance between bathymetry and sensor height, magnetic anomaly is continued upward to a level plane by using the Guspi method. We calculate crustal magnetization using Parker and Huestis's inversion algorithm, and try to find the hydrothermal vent and understand the structure of ocean floor crust. The result of deep-tow magnetic survey at FRSC showed that Central Anomaly Magnetization High(CAMH) recorded the max value of 4.5 A/m which is associated with active ridge. The direction of SSW-NNE corresponds with the direction of the principal spreading ridge in Lau basin. The low crustal magnetizaton$(174^{\circ}35.1'W,\;16^{\circ}38.4'S)$ of -4.0 A/m is supposed to correlate with submarine hydrothermal vent. Surface-tow magnetic data were collected in MTJ caldera$(174^{\circ}00'W,\;15^{\circ}20'S)$. The prevailing SSW-NNE direction of collapsing walls and the presence of CAMH at the center of caldera strongly indicate the existence of active spreading ridge in ancient times.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.2
• /
• pp.49-63
• /
• 2008

RDF is the base ontology model which is used in Semantic Web defined by W3C. OWL expands the RDF base model by providing various vocabularies for defining much more ontology relationships. Recently Jain and Farkas have suggested an RDF access control model based on RDF triple. Their research point is to introduce an authorization conflict problem by RDF inference which must be considered in RDF ontology data. Due to the problem, we cannot adopt XML access control model for RDF, although RDF is represented by XML. However, Jain and Farkas did not define the authorization propagation over the RDF upper/lower ontology concepts when an RDF authorization is specified. The reason why the authorization specification should be defined clearly is that finally, the authorizatin conflict is the problem between the authorization propagation in specifying an authorization and the authorization propagation in inferencing authorizations. In this article, first we define an RDF access authorization specification based on RDF triple in detail. Next, based on the definition, we analyze the authoriztion conflict problem by RDF inference in detail. Next, we briefly introduce a method which can quickly find an authorization conflict by using graph labeling techniques. This method is especially related with the subsumption relationship based inference. Finally, we present a comparison analysis with Jain and Farkas' study, and some experimental results showing the efficiency of the suggested conflict detection method.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.1
• /
• pp.9-14
• /
• 2020

In this paper, we studied on-board antenna(primary link/secondary link/satellite link) used in UAV Data-link system. As a result, it is ideal to configure the Data-link as a triple link to secure the flight stability of the UAV, but the communication link should be configured according to the operating platform. As a result of overseas R&D trend analysis, the on-board Data-link antenna is installed and operated in a location where it is easy to secure LOS. The primary link consists of a directional antenna for basic operation and an omni-directional antenna for emergency operation. The secondary link uses a monopole/dipole antenna in the UHF/C band. Satellite link has been developed to apply phased array antenna to improve UAV operability.

• Journal of the Korean Society for Library and Information Science
• /
• v.53 no.1
• /
• pp.57-81
• /
• 2019

An ontology is a complex structure dictionary that defines the relationship between terms and terms related to specific knowledge in a particular field. There have been attempts to construct various ontologies in Korea and abroad, but there has not been a case in which a large scale crime investigation record is constructed as an ontology and a service is implemented through the ontology. Therefore, this paper describes the process of constructing an ontology based on information extracted from instrusion theft field of unstructured data, a crime investigation document, and implementing an ontology-based search service and a crime spot recommendation service. In order to understand the performance of the search service, we have tested Top-K accuracy measurement, which is one of the accuracy measurement methods for event search, and obtained a maximum accuracy of 93.52% for the experimental data set. In addition, we have obtained a suitable clue field combination for the entire experimental data set, and we can calibrate the field location information in the database with the performance of F1-measure 76.19% Respectively.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.6
• /
• pp.411-417
• /
• 2020

To utilize building information modeling (BIM) technology at the bridge maintenance stage, it is necessary to integrate large quantities of bridge inspection and model data for object-oriented information management. This research aims to establish the benefits of utilizing the extended industry foundation class (IFC)-BIM and ontology for bridge inspection information management. The IFC entities were extended to represent the bridge objects, and a method of generating the extended IFC-based information model was proposed. The bridge inspection ontology was also developed by extraction and classification of inspection concepts from the AASHTO standard. The classified concepts and their relationships were mapped to the ontology based on the semantic triples approach. Finally, the extended IFC-based BIM model was integrated with the ontology for bridge inspection data management. The effectiveness of the proposed framework for bridge inspection information management by integration of the extended IFC-BIM and ontology was tested and verified by extracting bridge inspection data via the SPARQL query.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.10
• /
• pp.4797-4802
• /
• 2016

Background: Breast cancer (BC) is the top cancer among women worldwide and has been the most frequent malignancy among Kazakhstan women over the past few decades. Information on clinical and histopathological features of metastatic breast cancer (MBC), as well as the distribution of molecular subtypes is limited for Kazakh people. Materials and Methods: The present observational retrospective study was carried out at Regional Oncologic Dispensaries in the North-East Region of Kazakhstan (in Semey and Pavlodar cities). Сlinical and histopathological data were obtained for a total of 570 MBC patients in the 10 year period from 2004-2013, for whom data on molecular subtype were available for 253. Data from hospital charts were entered into SPSS 20 for analysis by one-way ANOVA analysis of associations of different variables with 1-5 year survival. Pearson correlation and linear regression models were used to examine the relation between parameters with a p-value < 0.05 considered statistically significant. Results: No significant relationships were evident between molecular subtype and survival, site of metastases, stage or ethnicity. Young females below the age of 44 were slightly more likely to have triple negative lesions. While the ductal type greatly predomonated, luminal A and B cases had a higher percentage with lobular morphology. Conclusions: In this select group of metastatice brease cancer, no links were noted for survival with molecular subtype, in contrast to much of the literature.

• Journal of Chest Surgery
• /
• v.49 no.sup1
• /
• pp.60-67
• /
• 2016

Background: Coronary angioplasty has been replacing coronary artery bypass grafting (CABG) because of the relative advantage in terms of recovery time and noninvasiveness of the procedure. Compared to other Organization for Economic Cooperation and Development (OECD) countries, Korea has experienced a rapid increase in coronary angioplasty volumes. Methods: We analyzed changes in procedure volumes of CABG and of percutaneous coronary intervention (PCI) from three sources: the OECD Health Data, the National Health Insurance Service (NHIS) surgery statistics, and the National Health Insurance claims data. Results: We found the ratio of procedure volume of PCI to that of CABG per 100,000 population was 19.12 in 2014, which was more than triple the OECD average of 5.92 for the same year. According to data from NHIS statistics, this ratio was an increase from 11.4 to 19.3 between 2006 and 2013. Conclusion: We found that Korea has a higher ratio of total procedure volumes of PCI with respect to CABG and also a more rapid increase of volumes of PCI than other countries. Prospective studies are required to determine whether this increase in absolute volumes of PCI is a natural response to a real medical need or representative of medical overuse.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2C
• /
• pp.175-183
• /
• 2006

This letter proposes a Direct Sequence Spread Spectrum (DS-SS)-based Flight Termination System(FTS) and show the simulation results and implements the system using FRGAs. The DS-SS FTS has immunity interference signals and the influence of jamming signal. Moreover, a DS-SS FTS can provides effects on an authentication and encryption with spread codes. And the system uses more less power than an analog FM system. We used Reed-Solomon (32, 28) code and triple Data Encryption Standard(3DES) for error correction and data encryption. Also we used counter algorithm for unauthenticated device's attack The spread codes of In-phase channel and Quadrature channel were generated by Gold sequence generators. The system was implemented in Altera APEX20K100E FPGA for the ground system and EPF10K100ARC240-3 for the airborne system.