• 제목/요약/키워드: Trip dynamics

검색결과 14건 처리시간 0.019초

소형자동차 실제도로 주행 배출가스 측정을 위한 국내 주행경로 개발 (Development of Korean RDE Routes for On-road Emissions Measurement of Light Duty Vehicles)

  • 강건우;이종태;박준홍;차준표;전문수
    • 한국자동차공학회논문집
    • /
    • 제25권3호
    • /
    • pp.287-296
    • /
    • 2017
  • Although emission regulations have been gradually strengthened in the past decade, the road transport section remains the most important source of NOx emission in air pollution. One reason is that there has been an increase in the proportion of diesel vehicles and in the volume of traffic. In addition, the certification procedure for standard emission limit does not sufficiently reflect real traffic condition and various driving patterns. Therefore, the European Commission(EC) has recently come up with the RDE-LDV(Real driving emissions-light duty vehicle) regulations, and the Ministry of Environment in Korea has been conducting research on evaluating RDE-LDV with PEMS(Portable Emission Measurement Systems). According to the trip requirements of the 2nd RDE package announced by the EC, the objectives of the present study include the development of Korean RDE routes to reflect domestic traffic and road conditions. Based on the results, both RDE routes are in correct compliance with RDE-LDV regulations, including trip requirements and trip dynamics. KOR-NIER Route 1, in particular, has a higher driving load in rural driving with regard to excessive gradient of elevation compared to KOR-NIER Route 2, including relatively plane rural driving.

Investigation and Simulation Study on the Cascading Trip-off Fault of a Large Number of Wind Turbines in China on May 14, 2012

  • Qiao, Ying;Lu, Zong-Xiang;Lu, Ji;Ruan, Jia-Yang;Wu, Lin-lin
    • Journal of Electrical Engineering and Technology
    • /
    • 제10권6호
    • /
    • pp.2240-2248
    • /
    • 2015
  • The integration of the large-scale wind power brings great challenge to the stability of the power grid. This paper investigates and studies the fault on May 14, 2012 of the large-scale cascading trip-off of wind turbines in North China. According to the characteristics of the voltage variation, the fault process is divided into three stages: the pre-event stage, the critical stage before cascading, and the cascading stage. The scenes in the fault are reproduced, using the full-size actual power system model. Simulation models of double-fed induction generators (DFIGs) and SVCs including protection settings and controller strategies are carefully chosen to find out the reason of voltage instability in each stage. Some voltage dynamic that have never been observed before in the faults of the same kind are analyzed in detail, and an equivalent voltage sensitive dynamic model of DFIG is proposed for the fast computation. The conclusions about the voltage dynamics are validated by the actual PMU observation evidence.

Effect of Lattice Dynamics on Superconductivity in Iron Pnictides

  • Lee, C.H.;Kihou, K.;Horigane, K.;Tsutsui, S.;Fukuda, T.;Miyazawa, K.;Eisaki, H.;Iyo, A.;Fernandez-Diaz, M.T.;Yamaguchi, H.;Baron, A.Q.R.;Braden, M.;Yamada, K.
    • 한국초전도학회:학술대회논문집
    • /
    • 한국초전도학회 2009년도 Korea Superconductivity Society Meeting 2009
    • /
    • pp.4-4
    • /
    • 2009
  • PDF

몬주 고속증식로 상부플레넘에서의 열성층에 관한 전산유체역학 해석 (COMPUTATIONAL FLUID DYNAMICS ANALYSIS OF THERMAL STRATIFICATION IN THE UPPER PLENUM OF THE MONJU FAST BREEDER REACTOR)

  • 최석기;이태호
    • 한국전산유체공학회지
    • /
    • 제17권4호
    • /
    • pp.41-48
    • /
    • 2012
  • A numerical analysis of thermal stratification in the upper plenum of the MONJU fast breeder reactor was performed. Calculations were performed for a 1/6 simplified model of the MONJU reactor using the commercial code, CFX-13. To better resolve the geometrically complex upper core structure of the MONJU reactor, the porous media approach was adopted for the simulation. First, a steady state solution was obtained and the transient solutions were then obtained for the turbine trip test conducted in December 1995. The time dependent inlet conditions for the mass flow rate and temperature were provided by JAEA. Good agreement with the experimental data was observed for steady state solution. The numerical solution of the transient analysis shows the formation of thermal stratification within the upper plenum of the reactor vessel during the turbine trip test. The temporal variations of temperature were predicted accurately by the present method in the initial rapid coastdown period (~300 seconds). However, transient numerical solutions show a faster thermal mixing than that observed in the experiment after the initial coastdown period. A nearly homogenization of the temperature field in the upper plenum is predicted after about 900 seconds, which is a much shorter-term thermal stratification than the experimental data indicates. This discrepancy is due to the shortcoming of the turbulence models available in the CFX-13 code for a natural convection flow with thermal stratification.

NUMERICAL ANALYSIS OF THERMAL STRATIFICATION IN THE UPPER PLENUM OF THE MONJU FAST REACTOR

  • Choi, Seok-Ki;Lee, Tae-Ho;Kim, Yeong-Il;Hahn, Dohee
    • Nuclear Engineering and Technology
    • /
    • 제45권2호
    • /
    • pp.191-202
    • /
    • 2013
  • A numerical analysis of thermal stratification in the upper plenum of the MONJU fast breeder reactor was performed. Calculations were performed for a 1/6 simplified model of the MONJU reactor using the commercial code, CFX-13. To better resolve the geometrically complex upper core structure of the MONJU reactor, the porous media approach was adopted for the simulation. First, a steady state solution was obtained and the transient solutions were then obtained for the turbine trip test conducted in December 1995. The time dependent inlet conditions for the mass flow rate and temperature were provided by JAEA. Good agreement with the experimental data was observed for steady state solution. The numerical solution of the transient analysis shows the formation of thermal stratification within the upper plenum of the reactor vessel during the turbine trip test. The temporal variations of temperature were predicted accurately by the present method in the initial rapid coastdown period (~300 seconds). However, transient numerical solutions show a faster thermal mixing than that observed in the experiment after the initial coastdown period. A nearly homogenization of the temperature field in the upper plenum is predicted after about 900 seconds, which is a much shorter-term thermal stratification than the experimental data indicates. This discrepancy may be due to the shortcoming of the turbulence models available in the CFX-13 code for a natural convection flow with thermal stratification.

미얀마 만달레이시의 단순화된 교통망을 이용한 전통적인 4단계 교통 모델에 관한 연구 (Exercising The Traditional Four-Step Transportation Model Using Simplified Transport Network of Mandalay City in Myanmar)

  • 웃위린;윤병조;이선민
    • 한국재난정보학회 논문집
    • /
    • 제20권2호
    • /
    • pp.257-269
    • /
    • 2024
  • Purpose: The purpose of this study is to explain the pivotal role of the travel forecasting process in urban transportation planning. This study emphasizes the use of travel forecasting models to anticipate future traffic. Method: This study examines the methodology used in urban travel demand modeling within transportation planning, specifically focusing on the Urban Transportation Modeling System (UTMS). UTMS is designed to predict various aspects of urban transportation, including quantities, temporal patterns, origin-destination pairs, modal preferences, and optimal routes in metropolitan areas. By analyzing UTMS and its operational framework, this research aims to enhance an understanding of contemporary urban travel demand modeling practices and their implications for transportation planning and urban mobility management. Result: The result of this study provides a nuanced understanding of travel dynamics, emphasizing the influence of variables such as average income, household size, and vehicle ownership on travel patterns. Furthermore, the attraction model highlights specific areas of significance, elucidating the role of retail locations, non-retail areas, and other locales in shaping the observed dynamics of transportation. Conclusion: The study methodically addressed urban travel dynamics in a four-ward area, employing a comprehensive modeling approach involving trip generation, attraction, distribution, modal split, and assignment. The findings, such as the prevalence of motorbikes as the primary mode of transportation and the impact of adjusted traffic patterns on reduced travel times, offer valuable insights for urban planners and policymakers in optimizing transportation networks. These insights can inform strategic decisions to enhance efficiency and sustainability in urban mobility planning.

헛디딤 보행특성과 3 차원 모의해석결과 비교 (Comparison of Three-Dimensional Dynamic Simulation with Falling Gait Analysis)

  • 명성식;금영광;황성재;김한성;김영호
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2004년도 추계학술대회 논문집
    • /
    • pp.359-363
    • /
    • 2004
  • Numerous studies have been performed to analyze various phenomena of human's walking, gait. In the present study, unrecognized walking and recognized walking were analyzed by three dimensional motion capture system(VICON motion system Ltd., England) and simulated by computer program. Two normal males participated in measuring the motion of unrecognized and recognized walking. Six infrared cameras and four force plates were used and sixteen reflective markers were attached to the subject to capture the motion. A musculoskeletal model was generated anatomically by using ADAMS(MSC software corp., USA) and LifeMOD(Biomechanics Research Group Inc, USA). The inverse dynamic simulation and forward dynamic simulation were also performed. The result of simulation was similar to the experimental result. This study provides the base line for dynamic simulation of the falling walking. It will be useful to simulate various another pathologic gaits for old peoples.

  • PDF

노약자를 위한 슬라이드엎 시트의 안전도 분석 (Safety Analysts of Slide-up Seat for the Elder and the Handicapped)

  • 이수철;임구
    • 한국정보기술응용학회:학술대회논문집
    • /
    • 한국정보기술응용학회 2002년도 추계공동학술대회 정보환경 변화에 따른 신정보기술 패러다임
    • /
    • pp.487-489
    • /
    • 2002
  • 현대는 고령화시대에 진입하면서 노약자와 장애인의 이동권과 접근권이 문제로 대두되고 있다. 본 연구에서는 장애인이나 고령자를 보호하여 차량실내외로 이송할 시 대두되는 노고 경감과 쾌적성 확보는 장거리 여행시 발생되는 접근성과 함께 중요한 역할을 하는 전동 슬라이드엎시트를 제작하는 과정에서 발생되는 안전성과 편리성을 중심으로 기구부 및 전동부분의 특성을 분석하고자 한다. 동특성에는 승용차 뒤칸의 좁은 공간을 고려한 궤적분석을 통한 간섭점검을 통한 기구부의 안전도를 확보하고자 한다. 이 설계기술은 노약자 및 장애인의 이동권과 접근권을 향상시킬 수 있는 전동슬라이드엎시트의 대량생산체제를 확보하기 위한 중요한 기초자료가 됨으로써 동 제품의 안전도와 정밀도 품질보증 확보에 큰 기여를 하게 된다.

  • PDF

노약자를 위한 슬라이드엎 시트의 안전도 분석 (Safety Analysis of Slide-up Seat for the Elder and the Handicapped)

  • 이수철;임구
    • 한국산업정보학회:학술대회논문집
    • /
    • 한국산업정보학회 2002년도 추계공동학술대회
    • /
    • pp.487-489
    • /
    • 2002
  • 현대는 고령화시대에 진입하면서 노약자와 장애인의 이동권과 접근권이 문제로 대두되고 있다. 본 연구에서는 장애인이나 고령자를 보호하여 차량실내외로 이송할 시 대두되는 노고 경감과 쾌적성 확보는 장거리 여행 시 발생되는 접근성과 함께 중요한 역할을 하는 전동 슬라이드엎시트를 제작하는 과정에서 발생되는 안전성과 편리성을 중심으로 기구부 및 전동부분의 특성을 분석하고자 한다. 동특성에는 승용차 뒤칸의 좁은 공간을 고려한 궤적분석을 통한 간섭점검을 통한 기구부의 안전도를 확보하고자 한다. 이 설계기술은 노약자 및 장애인의 이동권과 접근권을 향상시킬 수 있는 전동슬라이드엎시트의 대량생산체제를 확보하기 위한 중요한 기초자료가 됨으로써 동제품의 안전도와 정밀도 품질보증 확보에 큰 기여를 하게 된다.

  • PDF

노약자의 안전을 위한 전동스쿠터용 리프트의 동특성 분석 (Dynamic Analysis of Motor-Scooter Lifter for the Elder′s Safety and the Handicapped's)

  • 이수철;임구
    • 한국산업정보학회:학술대회논문집
    • /
    • 한국산업정보학회 2002년도 춘계학술대회 논문집
    • /
    • pp.57-61
    • /
    • 2002
  • 현대는 고령화시대에 진입하면서 노약자와 장애인의 이동권과 접근권이 문제로 대두되고 있다. 본 연구에서는 기존 전동횔체어를 점진적으로 대체하고 있는 전동스쿠터를 승용차에 실어 장거리 여행시 발생되는 접근성을 향상하는데 중요한 역할을 하는 리프트를 제작하는 과정에서 발생되는 안전성과 편리성을 중심으로 리프트의 동특성을 분석하고자 한다. 동특성에는 승용차 뒤칸의 좁은 공간을 고려한 궤적분석을 통한 간섭점검과 각 부위의 스트레스해석을 통한 기구부의 안전도를 확보하고자 한다. 이 설계기술은 노약자 및 장애인의 이동권과 접근권을 향상시킬 수 있는 전동스쿠터의 대량생산체제를 확보하기 위한 중요한 기초자료가 됨으로써 동 제품의 안전도와 정밀도 품질보증 확보에 큰 기여를 하게 된다.

  • PDF