• Journal of Korean Society of Transportation
• /
• v.16 no.1
• /
• pp.35-46
• /
• 1998

본 연구의 목적은 직장인과 비직장인들의 일일교통발생량과 관련된 시간적 요인들과 인구 및 사회.경제적 변수들의 관계를 비교.분석하는 것이다. 이러한 분석은 도심내 직장인과 비직장인들의 교통발생특성뿐만 아니라 교통방생행위 예측을 위한 기초적 이해를 제공한다. 본 연구의 대상 직장인과 비직장인들의 교통발생행태는 미국 텍사스주 샌 안토니오시에 살고 있는 사람들로 한정하였다. 본 연구에서 관련자료의 비교.분석한 결과 첫째, 직장인들의 평균 일일교통발생량이 비직장인들 보다 많다. 주활동 이전의 직장인의 교통발생량은 비직장인들보다 적고, 주활동 이후에는 직장인들이 비직장인들보다 많은 교통을 발생시키고 있다. 특히, 오후 교통혼잡시간대 직장인들의 교통발생이 비직장 인들보다 많은 차이를 나타낸다. 둘째, 두 집단의 주활동 기간은 그 밖의 다른 활동에 소비한 시간과 주활동 전후의 교통발생수와 반비례 상관관계를 갖는다. 주활동의 시간의 다소에 따라 다른활동을 위한 시간적 여유와 교통량과 밀접한 관계 때문에 주활동의 시간은 교통량분석에 있어 결정적 변수이다. 마지막으로 출근하기 이전 직장인들의 교통량은 사회.경제적 변수들과 관계없이 독립적으로 발생되나, 퇴근한 이후에는 모든 인구 및 사회.경제적 변수들과 밀접한 함수관계를 갖는다. 비직장인들의 교통발생은 자동차 보유대수와 경제적 여유수준과 밀접한 관계를 나타낸다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.10a
• /
• pp.185-190
• /
• 1995

Conventional alarm system has many difficulties in the operator's identifying the plant status during special situations such as design basis accidents. To solve the shortcomings, an on-line alarm annunciator system, called dynamic alarm console (DAC), was developed. In the DAC, a signal is generated as alarm by the use of an adaptive setpoint check strategy based on operating mode, and time delay technique is used not to generate nuisance alarms. After alarm generation, if activated alarm is a level precursor alarm or a consequencial alarm, it would be suppressed, and the residual alarms go through dynamic prioritization which provide the alarms with pertinent priorities to the current operating mode. Dynamic prioritization is achieved by going through the system- and mode-oriented prioritization. The DAC has the alarm hierarchical structure based on the physical and functional importance of alarms. Therefore the operator can perceive alarm impacts on the safety or performance of the plant with the alarm propagation from equipment level to plant functional level. In order to provide the operator with the most possible cause of the event and quick cognition of the plant status even without recognizing the individual alarms, reactor trip status tree (RTST) was developed. The DAC and the RTST have been simulated with on-line data obtained from the full-scope simulator for several abnormal cases. The results indicated that the system can provide the operator with useful and compact information fur the earlier termination and mitigation of an abnormal state.

• Korean Institute of Interior Design Journal
• /
• v.22 no.3
• /
• pp.81-90
• /
• 2013

There has been current trend running through each generation. All the leading areas in the fashion, art, architect industries etc. are absorbing the needs of the mass users and getting popular and high attentions from the society. One of recent trends are the interior design utilizing the aged style of materials such as bricks, antique and vintage objets. It is applied not only for the cafeteria, movie theater, museum but the cultural space. It reflects the brand-new and Utopian interpretation of design longings for the nostalgia and the old ages. This goes back to the picturesque aesthetics in the 1980s. The term "picturesque" means "picture-like". And it originated from the Utopian vision taken from the landscape paintings of English aristocrat's trip to Europe. it mainly reflects people's longing for the nostalgia and their the happy days in the past. In recent days of bad economies, it has been found in various areas from people's desire for the prosperity in the last days. The objective of this study is to examine the up-current trend of picturesque aesthetics and see its characteristics and how it can be applied to the interior design. And the feasibility study for the necessity of the picturesque aesthetics, any spatioperceptual elements and capable space for human beings to be made for an eclectic space in the desolate modern day life.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.1
• /
• pp.79-95
• /
• 2016

In order to improve the Quality-of-Service (QoS) of latency sensitive applications in next-generation cellular networks, multi-path is adopted to transmit packet stream in real-time to achieve high-quality video transmission in heterogeneous wireless networks. However, multi-path also introduces two important challenges: out-of-order issue and reordering delay. In this paper, we propose a new architecture based on Software Defined Network (SDN) for flow aggregation and flow splitting, and then design a Multiple Access Radio Scheduling (MARS) scheme based on relative Round-Trip Time (RTT) measurement. The QoS metrics including end-to-end delay, throughput and the packet out-of-order problem at the receiver have been investigated using the extensive simulation experiments. The performance results show that this SDN architecture coupled with the proposed MARS scheme can reduce the end-to-end delay and the reordering delay time caused by packet out-of-order as well as achieve a better throughput than the existing SMOS and Round-Robin algorithms.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.1076-1081
• /
• 2003

A new technique for generating millimeter-wave signals from a semiconductor laser is presented. The method multiples the signal frequency by using optical injection of short optical pulses at a sub-harmonic of the cavity round-trip frequency to drive the laser oscillating at its resonant frequency. A 32GHz signal is generated using a multisection semiconductor laser operated under continuous wave conditions, by injection optical pulses at a repetition rate equal to the fourth subhamonic(8GHz). The generated millimeter-wave signal exhibits a large submamonic suppression ratio(＞17 dB), large frequency detuning range (>300 MHz) low levels of phase-noise(-77.5 dBc/Hz), and large locking (>400 MHz)

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.276.2-278
• /
• 2000

In a recent years, a number of approaches have been studied, including passive, active, and hybrid mode-locking of semi-conductor lasers for short pulse generation and research has been devoted to achieve low timing-jitter operation since the timing jitter is unfavorable for system applications. Among the methods of mode locking, passive mode locking does not need external rf drives, and therefore the operation and fabrication procedures are simplified. In spite of these attractive advantages of passive mode-locked laser, it has critical drawbacks such as large timing jitter and the difficulty in synchronization with external circuits. Their inherent large timing jitter value was shown to be suppressed to certain levels by means of hybrid mode-locking technique$^{(1)}$ , where the saturable absorber section was modulated by an external signal with the cavity round trip frequency. Furthermore, the subharmonic mode-locking (SHML) technique alleviates the restrictions of high speed driving electronics. It has been demonstrated experimentally$^{(1)}$ that the hybrid subharmonic mode-locking technique has lead to significant reduction of the timing jitter. (omitted)

• Journal of Information Management
• /
• v.29 no.3
• /
• pp.1-26
• /
• 1998

The loop is a fundamental for the parallelism exploiting as it has a large portion of execution time for sequential Java program on the parallel machine. This paper proposes the method of exploiting the implicit parallelism through the analysis of data dependence in the existing Java programming language having a single loop structure. The parallel code generation method through the restructuring compiler and the translation method of Java source program into multithread statement, which is supported in the level of the Java programming language, are also proposed here. The performance test of the program translated into the thread statement is conducted using the trip count of loop and the thread count as parameters. The restructuring compiler makes it possible for users to reduce overhead and exploit parallelism efficiently in the Java programming.

• Nuclear Engineering and Technology
• /
• v.44 no.4
• /
• pp.355-362
• /
• 2012

The aim of this study was to develop a bundle position-wise linear model (BPLM) to predict Pressure Tube (PT) diametral creep employing the previously measured PT diameters and operating conditions. There are twelve bundles in a fuel channel, and for each bundle a linear model was developed by using the dependent variables, such as the fast neutron fluences and the bundle coolant temperatures. The training data set was selected using the subtractive clustering method. The data of 39 channels that consist of 80 percent of a total of 49 measured channels from Units 2, 3, and 4 of the Wolsung nuclear plant in Korea were used to develop the BPLM. The data from the remaining 10 channels were used to test the developed BPLM. The BPLM was optimized by the maximum likelihood estimation method. The developed BPLM to predict PT diametral creep was verified using the operating data gathered from Units 2, 3, and 4. Two error components for the BPLM, which are the epistemic error and the aleatory error, were generated. The diametral creep prediction and two error components will be used for the generation of the regional overpower trip setpoint at the corresponding effective full power days. The root mean square (RMS) errors were also generated and compared to those from the current prediction method. The RMS errors were found to be less than the previous errors.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.10B
• /
• pp.638-643
• /
• 2007

Interconnecting wireless local area networks (WLANs) with third generation (3G) cellular networks has become an issue of great interest. However, a Vertical Handover (VHO) causes an abrupt change in link bandwidth. Due to such a change, TCP triggers unnecessary fast retransmission during a Downward VHO (DVHO) from a cellular network to a WLAN, causing throughput degradation. Thus, we propose a new reordering mechanism for DVHO that suppresses unnecessary retransmission due to the spurious duplicate acknowledgments. We analytically investigate the throughput of TCP in the literature and our proposed scheme. Through the numerical and simulation results, it is shown that our proposed TCP achieves better performance in terms of throughput, compared with Nodupack with SACK.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.20 no.2
• /
• pp.17-26
• /
• 2014

Purpose: This study tries to explore and analyse Service Attached Elderly Housing of Japan in order to prepare new elderly housing type effectively for aged society of Korea. Service Attached Elderly Housing was introduced in 2011 and it includes existing elderly housing of Japan such as Designated Elderly Housing, Elderly Friendly Housing and Superior Elderly Housing. Methods: Historical transition of Japanese elderly housing and background of the introduction of Service Attached Elderly Housing have been reviewed first. Thereafter research team visited to 3 elderly housings of Japan providing elderly services such as elderly care, meal, cleaning, washing, safety check, entertainment, etc. Based on the literature survey and field trip, the characteristics of Service Attached Elderly Housing have been drew out. Results: As the characteristics of Service Attached Elderly Housing of Japan, mixed use facility, community based housing, generation mix, barrier free design, and provision of daily life service for the elderly have been identified. Implications: Not only physical consideration including Universal Design but also elderly services such as elderly care, meal, housework, safety check, entertainment and so on are necessary for the supply of elderly housing.