• Bulletin of the Korean Chemical Society
• /
• 제25권9호
• /
• pp.1355-1360
• /
• 2004

The oxidative decomposition of trichloroethylene (TCE) was investigated using palladium catalysts supported on pure and sulfated zirconia. The reactions were performed under dry and wet conditions in the temperature between 200 and $550^{\circ}C$ keeping GHSV of 14,000 $h^{-1}.$ The products such as $C_2Cl_4,\;C_2HCl_5,\;CO\;and\;CO_2$ were observed in the reaction. The addition of water in the feed affected the distribution of reaction product with dramatically improved catalytic activity. The spectroscopic investigations gave an evidence that the strong acid sites play an important role on controlling the catalytic activity. Among the catalysts investigated, the Pd-loaded sulfated zirconia catalyst with 1 wt% Pd was found to exhibit the highest catalytic activity in the presence of water vapor having the stability for 30 h of the reaction at $500^{\circ}C$. The successful performance of the catalyst might be attributed to promotional effect of Pd active sites and strong acid sites induced from surface sulfate species on zirconia.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.552-553
• /
• 2005

In order to improve energy efficiency in the dilute trichloroethylene removal using the nonthermal plasma process, the barrier discharge treatment combined with manganese dioxide was experimentally studied. Reaction kinetics in this process was studied on the basis of final byproducts distribution. Decomposition efficiency was improved to about 99% at the specific energy 40J/L with passing through manganese dioxide. C=C $\pi$ bond cleavage in TCE gave DCAC (single bond, C-C) through oxidation reaction during the barrier discharge plasma treatment. Those DCAC were broken easily in the subsequent catalytic reaction due to the weak bonding energy about 3 ~ 4 eV compared with the double bonding energy in TCE molecules. Oxidation byproducts of DCAC and TCAA from TCE decomposition are generated from the barrier discharge plasma treatment and catalytic surface chemical reaction, respectively. Complete oxidation of TCE into $CO_X$ is required to about 400J/L.

• 대한토목학회논문집
• /
• 제33권4호
• /
• pp.1463-1469
• /
• 2013

고화제로 사용되는 포틀랜드 시멘트와 2가철을 이용하여 염소계 유기화합물을 탈염소화 시키는 기술은 많은 연구로부터 알려져 왔다. 하지만 TCE (trichloroethylene)의 탈염소화에 관계하는 명확한 유효물질 및 기작 규명은 요원한 상태이다. 많은 연구에서 ettringite와 monosulfate와 같은 시멘트 수화물질이 TCE의 탈염소화 반응에 관여할 가능성을 보고한 바 있다. 따라서 본 연구에서는 TCE의 탈염소화 반응에 유효물질로 예상 되어왔던 ettringite와 monosulfate를 별도로 합성하여, TCE 제거 실험을 수행함으로서 기존 시멘트/2가철을 사용한 TCE 분해제거에 관계하는 명확한 유효물질 및 기작을 규명 하고자 하였다. 실험결과, $Fe^{3+}$ 및 $Al^{3+}$로 구성된 ettringite, monosulfate 합성에 성공하였고, 이후 2가철을 첨가하여 TCE 분해실험에서 합성물의 분해능을 확인하였지만 뚜렷한 제거가 나타나지 않았다. 이는 기존문헌의 예상과는 상반된 결과를 나타냈으며, 실험결과를 통해 시멘트/2가철을 사용한 TCE 제거 실험의 분해기작을 예상할 수 있었다. 예상 되는 분해기작으로는 ettringite 및 monosulfate 외의 시멘트 수화물에 의한 것과 C3A외의 시멘트 클링커 화합물 그리고 시멘트 내 trace metal에 의한 영향일 것으로 추측하였다.

• 한국산업보건학회지
• /
• 제7권1호
• /
• pp.33-48
• /
• 1997

Korean diffusive sampler (KDS) and charcoal tube (CT) were used for sampling n-hexane, trichloroethylene and toluene in air KDS was made by Department of Environmental Health, SNU-SPH in 1995. Surveys were conducted at ten industrial plants with organic solvents. The relationship between two sampling methods was examined by linear regression analysis, and concentrations by two sampling methods were compared using paired t-test. The results are as follows: 1. The geometric means by CT and KDS methods were 3.26ppm and 3.32ppm for n-hexane, 5.07ppm and 6.34ppm for toluene, and 7.18ppm and 7.90ppm for toluene, respectively. There was no significant difference between results by CT and KDS methods in three organic vapors (p>0.05). When linear regression analysis was performed, two sampling methods were highly related ; correlation coefficients were 0.98, 0.90 and 0.96 for n-hexane, toluene and trichloroethylene, respectively. 2. Airborne concentrations of n-hexane (n=21) were below 0.5 TLV level. The GM by two methods were almost same (3.09 ppm). And there was no significant difference between results by two methods (p>0.05). 3. Since toluene and trichloroethylene concentrations showed several levels, appropriate sampling rates were applied for each level. The GM of toluene concentrations by two methods at 0.5 TLV level were 3.75ppm and 5.48ppm. The KDS method overestimated the toluene concentrations at 0.5 TLV level (p<0.05). The GM values of toluene concentrations at 1 TLV level were 31.80ppm and 25.38ppm and at 2 TLV level were 64.13 ppm and 51.37 ppm. The KDS method underestimated concentration at both level (p<0.05). For trichloroethylene, the GM at 0.5 TLV level were 4.97 ppm and 7.11ppm. The KDS method overestimated the concentration of trichloroethylene (p<0.05). In conclusion, concentrations of three organic vapors measured by CT and KDS were not significantly different and results by two methods were highly related. But at contain concentrations, the levels by method were significantly different. Therefore, it is suggested that sampling rate of KDS should be studied simultaneously using CT method for organic vapors.

• 한국산업보건학회지
• /
• 제25권2호
• /
• pp.134-145
• /
• 2015

Objectives: An objective of this study was to perform a risk assessment and social cost-benefit analysis for revising permissible exposure limits for seven substances: Nickel(Insoluble inorganic compounds), benzene, carbon disulfide, formaldehyde, cadmium(as compounds), trichloroethylene, touluene-2,4-diisocyanate. Materials and Methods: The research methods were divided into risk and hazard assessment and cost-benefit analysis. The risk and hazard assessment for the seven substances consists of four steps: An overview of GHS MSDS(1st), review of document of ACGIH's TLVs (2nd), comparison between international occupational exposure limits and domestic permissible exposure limits(3rd), and analysis of excess workplace and excess rate for occupational exposure limits based on previous work environment measurement data(4th). Total cost was estimated using cost of local exhaust ventilation, number of excess workplace and penalties for exceeding a permissible exposure limit. On the other hand, total benefit was calculated using the reduction rate of occupational disease, number of workplaces treating each substance and industrial accident compensation. Finally, the net benefit was calculated by subtracting total cost from total benefit. Results: All the substances investigated in this study were classified by CMR(Carcinogens, Mutagens or Reproductive toxicants) and their international occupational exposure limits were stricter than the domestic permissible exposure limits. As a result of excess rate analysis, trichloroethylene was the highest at 11%, whereas nickel was the lowest at 0.5%. The excess rates of all substances except for trichloroethylene were observed at less than 10%. Among the seven substances, the total cost was highest for trichloroethylene and lowest for carbon disulfide. The benefits for the seven substances were higher than costs estimated based on strengthening current permissible exposure limits. Thus, revising the permissible exposure limits of the seven substances was determined to be acceptable from a social perspective. Conclusions: The final revised permissible exposure limits suggested for the seven substances are as follows: $0.2mg/m^3$ for nickel, 0.5 ppm(TWA) and 2.5 ppm(STEL) for benzene, 1 ppm(TWA) for carbon disulfide, $0.01mg/m^3$(TWA) for cadmium, 10 ppm(TWA) and 25 ppm(STEL) for trichloroethylene, 0.3 ppm(TWA) for formaldehyde, and 0.005 ppm(TWA) and 0.02 ppm(STEL) for toluene diisocynate(isomers).

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 1997년도 한국대기보전학회 추계학술대회 요지집
• /
• pp.157-158
• /
• 1997

• 한국생명과학회:학술대회논문집
• /
• 한국생명과학회 2002년도 제37회 국제학술심포지움 및 추계학술대회
• /
• pp.45-45
• /
• 2002

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 춘계학술발표대회
• /
• pp.410-413
• /
• 2000

TBR에 공급되는 성장기질인 phenol의 농도에 따른 TCE 분해 효율 변화를 살펴보았다. Phenol 공급이 없는 경우에서의 TCE 제거효율은 평균 42.8%로 유지된 반면, phenol을 0.94 ppm 농도로 공급해줌으로써 TCE 분해 효율을 16% 정도 증가시킬 수 있었다. 따라서 TBR에 알맞은 양의 성장기질을 공급하면, TCE 분해 과정에서 불활성화되는 효소 및 세포의 재활성화를 통해 TCE 분해 효율이 증가시킬 수 있었다.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2005년도 Proceedings of KSEH.Minamata Forum
• /
• pp.78-82
• /
• 2005

The research addressed the ability of 5% $Cr_2O_3/{\gamma}-Al_2O_3$ to catalytically oxidize trichloroethylene(TCE). In order to determine which procedure gives the most active catalyst among the attempted several procedures, catalytic oxidation reaction of TCE was conducted to every catalysts synthesized according to different process in tubular reactor system, which had functional relationships with temperature and space velocity. The ratio of TCE conversion was analyzed by gas chromatography with electron capture detector.

• 한국미생물·생명공학회지
• /
• 제22권2호
• /
• pp.203-209
• /
• 1994

The bacterial strain which utilizes phenol and degrade TCE was isolated from an industrial waste site. The bacterial strain was named as T5-7 and identified as an Acinetobacter species. After phenol-induction, the strain T5-7 removed TCE efficiently without cell growth. So, it seems that TCE degradation was not related to cell growth. TCE degradation increased when initial cell concentrations of phenol-grown T5-7 were high. In the presence of phenol, initial degradation of TCE was delayed but total amount of degradation was not affected at final stage. The strain cultured in 0.1% yeast extract did not degrade TCE, which indicates that phenol induction was essential to the TCE degradation.