• Tribology and Lubricants
• /
• 제12권4호
• /
• pp.43-51
• /
• 1996

Rapid increase of refrigeration & air-conditioning system (r & a system) in modem industries brings attention to the urgency of research & development as a core technology in the area. And it is required to the compatibility problem of r & a system to alternative refrigerant for the protection of environment. Then, it is requested to study the lubrication characteristics of refrigerant compressor which is the core technology in the r & a system. The study of lubrication characteristics in the critical sliding component is essential for the design of refrigerant compressor. Therefore, theoretical investigation of the lubrication characteristics of rotary compressor for r & a system is studied. The Runge-Kutta method is used for the analysis of the behavior of rolling piston in the rotary compressor. The results show that the rotating speed of shaft and the discharge pressure have an important effect upon the angular velocity of the rolling piston. This results give important basic data for the further lubrication analysis and design of the rotary compressor.

• Tribology and Lubricants
• /
• 제21권2호
• /
• pp.83-92
• /
• 2005

A piston assembly is very important because it directly receives the energy generated during combustion process. Surely, the friction and lubrication of piston-ring pack do an important role in the performance and fuel economy of an engine. In fact, the friction loss in piston-ring pack is the biggest portion to the whole engine friction. Therefore, the improvement of lubrication quality and friction loss in piston-ring pack will be directly related with the improvement in the performance and fuel economy of an engine. Meanwhile, the oil consumption and blow-by gas through piston-cylinder-ring crevices have to be controlled as less as possible. In these two aspects, the study on the optimized design of piston-ring pack has to be carried out. In this study, for the efficient design of piston-ring pack, it is focused to develop a basic computer program that predicts the inter-ring pressure, the motion of ring and the blow-by gas through a crevice volume model between adjacent rings, and the oil film thickness and the friction computed by lubrication theories.

• Tribology and Lubricants
• /
• 제18권6호
• /
• pp.384-388
• /
• 2002

The adequate design of a passenger car braking system, which is directly related to the safety of a car, is very important since the safety is an essential design parameter of a car to keep men and car from the damage. The thermal behaviors of the ventilated disk has been investigated based on the air cooling effects during repeat braking operations. In this study, the thermal behavior of ventilated disk brake system was investigated by numerical method. The 3-Dimensional unsteady model was simulated by using a general purpose software package “FLUENT” to obtain the temperature distributions of disk and pad. The model includes the more realistic braking method, which repeats braking and release. The effects of aspect ratio of ventilated hole on the heat dissipation was investigated.

• Tribology and Lubricants
• /
• 제3권1호
• /
• pp.18-25
• /
• 1987

The influence of one sided striated surface roughness on load carrying capacity of a slider bearing is analyzed for very low clearance films. A Reynolds equation appropriate for slider bearing is derived and analyzed by the method of finite difference method. For a slider bearing with several simple roughness form, the pressure, load capacity and other parameters can be revealed and also this results can be stored in sequential data file. After all, their distribution can be displayed easily by using the CADG(Computer Aided Design and Graphics) program. Also exact solutions with this nemerical method are compared with those of the theory attributed to Tonder and White. The results reported here should find application in the computer peripherals where computer aided design and graphic package is needed.

• Tribology and Lubricants
• /
• 제24권1호
• /
• pp.14-20
• /
• 2008

In this paper, the characteristics of trapezoidal air screws is studied. These screws can e applied to the elevator having column driving shaft. The generalized coordinate transformation technique is used to solve incompressible Reynolds' equation because the air lubricated plane is twisted. The transformed equation is discretized by the base of Finite difference method. Using Visual C++ language, a GUI program which can calculate he load carrying capacity for this kind of air screw is developed, then the design variables for these air screws is studied.

• Tribology and Lubricants
• /
• 제20권2호
• /
• pp.58-67
• /
• 2004

In this study a general Galerkin FE lubrication analysis method for the compressible Reynolds equation in cylindrical coordinates is presented. Then, the method is applied for analyzing lubrication performances of spiral groove dry gas seals. The effects of toning and number of groove on performance indices are evaluated at low and high rotating speeds: 3,600 and 15,000 rpm. Results show that, for the primary design consideration performances such as the opening force and axial and angular stiffnesses, a negative or small coning and a large number of groove are preferred.

• Tribology and Lubricants
• /
• 제20권2호
• /
• pp.84-90
• /
• 2004

It is very important to improve the durability and reliability of crankshaft because of conflicting demands for lower fuel consumption and higher power output. In this study, for the crankshaft bearing design, analyses were conducted to determine the lubrication characteristics such as oil flow rate, minimum oil film thickness, friction force and increase of oil temperature at main bearing and connecting rod bearing. Additionally, supplied oil pressure and temperature effects on the bearings were simulated to figure out lubrication characteristics on the bearings. Finally the effects of increasing the bearing width and clearance were introduced on the lubrication characteristics.

• Tribology and Lubricants
• /
• 제13권4호
• /
• pp.1-9
• /
• 1997

ER clutch is a device using ER fluid, so called "intelligent material" and is a power transmission system controlled with electric field strength. In this paper(Part III), the behavior of ER clutch under proper conditions was investigated experimentally and compared to theoretical analyses developed from Part I, II. Considering the optimum design concept proposed from Part I, the concentric cylinder type of ER clutch was designed and the experimental apparatus for the performance test was constructed. The comparisons made indicated that the power transmission model of ER clutch and the temperature rise model of ER fluid developed from Part I, II were acceptable for engineering design calculations.culations.

• Tribology and Lubricants
• /
• 제16권4호
• /
• pp.259-265
• /
• 2000

Pump which is the fundamental device in the hydraulic system affects on overall system performance to a great deal. Such problems as leakage and solid friction loss become important in field applications, especially for the case of operation under high pressure and at high speed. So the research on this kind of subjects is necessary to improve the performance of hydraulic devices. A high pressure radial piston pump is analyzed here, which has a stationary cylinder block. It pumps hydraulic fluid by letting camring push a piston in a cylinder. Fluid leaks between the piston and cylinder so that it deteriorates the pump efficiency. Furthermore, the piston happens to touch the cylinder wall to increase the friction loss and wear. In this research, by means of FDA, volumetric, mechanical and overall efficiencies are observed by varying several design parameters and operation conditions. Design values or their trends are presented to improve these effciencies.

• Tribology and Lubricants
• /
• 제30권1호
• /
• pp.46-51
• /
• 2014

In this study, we attempted to characterize the physical meaning of the design parameters used for automobile passive dampers by considering the slit, disc, and hole, which influence the pressure characteristics. We also analyzed the change in the pressure characteristics when mixing various slits and discs. Finally, we used a computer simulation to implement lag according to nitrogen gas and analyzed the dependence of frequency on the nitrogen gas pressure.