• 지질공학
• /
• 제32권4호
• /
• pp.597-610
• /
• 2022

중간주응력을 고려한 마찰재료의 파괴거동에 대한 확고한 이해는 대심도 보어홀 안정성 및 단층해석 등과 관련된 현장 적용의 고도화를 위한 필수적인 과정이다. 본 연구는 진삼축압축 조건을 물리적으로 구현하는 장비를 설계·제작하였으며 마찰재료로 제작된 석고 시료에 대한 진삼축압축시험을 통하여 재료의 파괴거동 특성을 논의하고 삼차원파괴함수의 적용성을 검토하였다. 진삼축압축시험을 위한 석고 재료는 52(w) × 52(l) × 104(h) mm의 직육면체 시료로 성형하였으며 다양한 조합의 𝜎₃, 𝜎₂의 조건으로 총 24회의 진삼축압축시험이 수행되었다. 또한, 삼차원 파괴기준식의 파라미터로 사용되는 석고의 강도정수 측정을 위하여 전통적인 일축압축시험 및 삼축압축시험이 수행되었다. 석고 재료의 응력-변형 특성은 중간주응력과 최소주응력의 차이가 클수록 취성거동이 더욱 강하게 나타났으며, 시료의 강도 및 변형은 중간주응력의 변화를 반영하는 것으로 평가되었다. 주응력 좌표계에서 시험 데이터에 대한 비선형 다중회귀분석을 수행한 결과 수정 Wiebols-Cook 파괴기준 및 수정 Lade 파괴기준이 석고 시료에 대한 삼차원 파괴기준으로 가장 적합하였다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.1053-1062
• /
• 1993

The effect of loading speed on soil failure was studied by using a high speed triaxial compression test. Tests were conducted at 0.35-6.2m/s loading speed to compress soil specimens of sandy loam at different moisture contents. The axial stress at fracture increased with increase in loading speed up to certain critical speeds, however they decreased as the speed up to certain critical speeds, however they decreased as the speed increased further. Experiments were also conducted in the field of sandy loam soil with the vibrating tillage tool. Tests were done at 0.33-0.85m/s tractor speed oscillating frequency 13.7hz and oscillating amplitude 59mm. The maximum oscillating velocity of tillage tool was 2.5m/s. It was observed that for the oscillating operation, initially draft slightly increased with increase in forward speed and then it decreased .For the non-oscillating operation, draft increased continuously with increase in forward speed. Approach of studying soil failure in the laboratory test can be related to the field experiments.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1997년도 Lecture Notes by Two Distinguished Scholars
• /
• pp.1.2-22
• /
• 1997

Anisotropic behaviour in soils and soft rocks may be either fabric of stress related ultra in practice is invariably a combination of both. Theoretical studies in the paper include tile iMluence oil untrained strength of assuming both the critical state and Mo21r-Coulomb concepts to hold, and the influence of elastic anisotropy oil predicted undrained effective stress paths. The predictions stemming from these theoretical concepts are examined in the light of evidence from triaxial compression and extension tests oil laboratory prepared, compacted and natural clays and from triaxial compression tests on clay shales. The experimental studies also show the Buence of sample orientation on untrained snear strength, as wen as the iIBluence of anisotropy old the effective stress angle cishearing resistance and of stress patn on measured stiffness.

• 한국농공학회지
• /
• 제41권2호
• /
• pp.70-79
• /
• 1999

The lower ground of structure, in which the strip loads, such as earth dams and embankments , are signiificantly working on , is required to be interpreted as a state of plane strain where the strain of intermediated principal stress direction is put '0' . The plane strain state is frquently observed in actural soil engineering case. For those case, drained stress-strain and strength behavior of Iksan weathered granite soil prepared in cubical specimens with cross-anisotropic fabric was studied by conventional triaxial compression, plane strain and cubial triaxial tests with independent control of the three principal stress. All specimens were loaded under conditions of principl stress directions fixed and aligned with the directions of the material axes. As a result of research , when a ground condition is analyzed under plane strain state, the shear strength obtained from the conventional triaxial compression test can be understimated.

• Geomechanics and Engineering
• /
• 제10권4호
• /
• pp.455-470
• /
• 2016

In ballasted railway tracks, ballast fouling due to finer material intrusion has been identified as a challenging issue in track maintenance works. In this research, deformation characteristics of crushed stone-sand mixtures, simulating fresh and fouled ballasts were studied from laboratory and a 3-D discrete element method (DEM) triaxial compression tests. The DEM simulation was performed using a recently developed DEM approach, named, Yet Another Dynamic Engine (YADE). First, void ratio characteristics of crushed stone-sand mixtures were studied. Then, triaxial compression tests were conducted on specimens with 80 and 50% of relative densities simulating dense and loose states respectively. Initial DEM simulations were conducted using sphere particles. As stress-strain behaviour of crushed stone-sand mixtures evaluated by sphere particles were different from laboratory specimens, in next DEM simulations, the particles were modeled by a clump particle. The clump shape was selected using shape indexes of the actual particles evaluated by an image analysis. It was observed that the packing behaviour of laboratory crushed stone-sand mixtures were matched well with the DEM simulation with clump particles. The results also showed that the strength properties of crushed stone deteriorate when they are mixed by 30% or more of sand, specially under dense state. The results also showed that clump particles give closer stress-strain behaviour to laboratory specimens than sphere particles.

• 한국농공학회지
• /
• 제30권3호
• /
• pp.69-81
• /
• 1988

The Repeated Load Triaxial and Oedometer Tests to the weathered granite & silty clay soil have been fulfilled to investigate their dynarnic characteristics. The results obtained are summarized as follows ; 1. In the relation between the repeated triaxial compression and the oedometer test, the recoverable strain of weathered granite soil showed a tendency to decrease by the increase of the repeated loads number(N), and that of silty clay showed approximately constant values while the total strain increased continuously. 2. The changes of plastic strain was dependent to the level of deviator stress which is the most important element in the calculation of soil deformation under repeated load condition. And there was a significance of 10% between the level of stress and plastic strain. 3. When the soil was aimost dried or saturated to 100%, the deformation by the repeated loads was small. However the deformation showed peak around the saturation of 50%. 4. When the deformation was predicted by the repeated triaxial load tests of a laboratory, it is desirable to introduce the threshold stress concept in the calculation of deformation of subgrade of the pavement. 5. The improved design equation (Eq. 16) introducing the modulus of conversion(Fo), which is based on the Boussineq' s theory, is considered to be rational in the design of flexible pavement. From the above results, the deformation to the repeated traffic loads could be predicted by the repeated triaxial tests on the pavement materials or undisturbed soil layers, therefore it is think that the durable and econornic pavement could be constructed by reflecting that to the design.

• 한국지반환경공학회 논문집
• /
• 제3권3호
• /
• pp.53-63
• /
• 2002

최근까지 우리나라의 암성토의 침하량을 산정하기 위해 가정된 탄성계수를 이용한 선형탄성해석 외에 다른 방법들이 시도되지 않고 있다. 특히 해상투기된 사석으로 구성된 방파제 구조물의 침하량을 정확히 산정하는 것은 거의 불가능하였다. 이 연구에서는 북제주의 채석장에서 채취한 3조의 다공질의 북제주의 화산암시료에 대해 대형삼축압축시험을 수행하였고 비선형모델을 이용하여 삼축압축시험을 수치해석으로 모사하였다. 실험과 해석에 의한 응력-변형률 거동이 비교되어 사석에 대한 하이퍼볼릭 구성모델의 적용성을 조사하였다. 비교 결과 두 응력-변형률 거동이 잘 일치하므로 하이퍼볼릭 모델은 느슨한 암성토체의 침하량을 산정하는데 적절한 것으로 판단되어진다.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.386-389
• /
• 2001

The strength parameters of two different type of disturbed weathered soils were investigated by the triaxial tests in this study. Soil samples include granite soils from two different sites and non-granite soils from six sampling sites. The results of this study indicate that the triaxial tests could be employed for determining the strength parameters for disturbed soil samples. When additional parameters are obtained by further experiments, they could be utilized in various engineering design practices.

• 한국지반공학회지:지반
• /
• 제10권3호
• /
• pp.111-118
• /
• 1994

A series of drained cubical triaxial tests was performed to investigate the finfluence of the intermediate principal stress on the deformation and strength characteristics of sand. Test results showed that the strength of sand as represented by the friction angle increased from triaxial compression condition (b:0) with increasing magnitude of the intermediate principal stress until the vus of b reached 0.75, land it decreased slightly with closing to b= 1. Also it was found that the projection of the plastic strain increment vector on the octahedral plane was perpendicular to the trace of the failure surface on that plane. The prediction by the isotropic single hardening model sllowed good coinidence with experimental results.

• 터널과지하공간
• /
• 제27권4호
• /
• pp.243-252
• /
• 2017

횡등방성 암석의 파괴거동은 등방성 암석의 경우와 큰 차이가 있으므로 횡등방성 암반에 건설되는 암반구조물의 정밀한 안정성 평가를 위해서는 횡등방 파괴함수의 개발이 필요하다. 이 연구에서는 17세기 천문학자 Cassini가 지구둘레를 도는 태양의 궤도를 모델링하기 위해 제안한 Cassini 난형(卵形)곡선을 기반으로 횡등방성 암석의 강도정수 분포함수를 제안하였다. 제안된 강도정수 분포함수는 횡등방성 암석시료에 대한 삼축압축시험을 통해 실험적으로 결정이 가능한 2개의 모델 파라미터로 정의된다. 제안된 강도정수 분포함수를 마찰각과 점착력의 공간분포함수로 채용하여 기존의 Mohr-Coulomb(M-C) 파괴함수를 3차원 횡등방성 M-C 파괴함수로 확장시켰다. 제안된 횡등방성 M-C 파괴함수의 적합성을 검증하기 위해 횡등방성 암석시료의 삼축압축시험 및 진삼축압축시험을 수치모사하였다. 수치실험을 통해 예측된 결과는 실제 실험실 시험에서 관찰되는 횡등방성 암석의 파괴거동과 부합하였다. 또한 진삼축압축시험 수치모사 결과는 암석강도의 중간주응력 의존성이 암석시료에 포함된 미시적 연약면의 공간분포 특성과 밀접한 관련이 있을 수 있음을 보여주었다.