Fifty-five sweet pepper (Capsicum annuum L.) germplasm from the Rural Development Administration (RDA) were analyzed for their fruit yield and fruit quality characters, including fruit weight, fruit size, pericarp thickness, total soluble content, fruit lobe, fruit shape, fruit surface and fruit color. Fruit yield per plot ranged from 200 g to 8150 g (average, 1884 g). Fruit fresh-weight per fruit ranged from 27.3 g to 200.0 g with an average of 97.2 g. Fruit length varied from 4.0 cm to 16.2 cm (average, 9.6 cm). Fruit length-to-width ratio ranged from 0.6 to 3.0 with an average 1.7. The fruit pericarp thickness ranged from 1.8 mm to 10.7 mm (average, 4.8 mm). Total soluble content was the highest ($8.5^{\circ}Brix$) in K156286 and the lowest ($5.3^{\circ}Brix$) in K156208 with the average value $6.7^{\circ}Brix$. Fruit lobes numbers varied from 2 to 4. Blocky, triangular, elongated, rectangular and round fruit shape identified among the sweet pepper accessions. Fruit surface varied from smooth to wrinkle and fruit color also varied. The presence of variability in fruit yield and quality traits within the sweet pepper genotypes can be utilized to develop high yielding sweet pepper variety with better fruit quality characters.
This study was designed to estimate the shelf-life of the popular chilled foods kimbab (rice rolled in dried laver), samgak kimbab (triangular rice rolled in dried laver), eomook (fish surimi, boiled fish paste) mook (acorn-starch jelly), and tofu (soybean curd) in large discount markets and convenience stores. Different types of chilled foods were stored at 5, 7, and 10 for 7 and 28 days, and changes in the total numbers of the aerobic bacteria were monitored. Values of 6 and 7 log cfu/g were used as the standard. Ready-to-eat foods stored at 5 showed a much longer shelf-life compared to storage at 10. The respective percentage increases in the shelf-life observed at both 7 and 5 were kimbab (70%, 171%), samgak kimbab (87%, 143%), soybean curd (46%, 95%), fish surimi (46%, 99%), and mook (45%, 87%). To reduce the microbiological contamination, storages at 7 and 5 are recommended for the increases of 45-88 and 87-171% in the shelf-life of these chilled foods.
Journal of the Korean Institute of Intelligent Systems
/
v.7
no.2
/
pp.70-78
/
1997
Proportional-integral-derivative(P1D) controllers have been still widely used in industrial processes due to their
simplicity, effectiveness, robustness for a wide range of operating conditions, and the familiarity of control engineers.
And a number of recent papers in fuzzy systems are showing that fuzzy systems are universal approximators.
That is, fuzzy controllers are capable of approximating any real continuous function on a compact set of arbitrary
accuracy.
In this paper, we derive the linear PID control law from the fuzzy control algorithm where all fuzzy sets for
representing plant state variables and a control variable use common triangular types. We first lead a linear PD
control law from a fuzzy logic control with only two fuzzy sets for error and change-of-error. And then we derive
the linear PID control law from a fuzzy controller. We here assumed that the intervals of error, change-of-error,
and integral error could be partitioned into arbitrary numbers, respectively. As a result, a linear PID controller is
only a sort of various fuzzy logic controls.
Journal of Korean Society of Industrial and Systems Engineering
/
v.15
no.26
/
pp.111-117
/
1992
In the stock marketing. investor needs speedy and accurate decision making for the investment. A stock exchange index provides the important index of the early of 1993 in Korea using Fuzzy Delphi Method(F. D. M) which is widely used to a mid and long range forecasting in decision making problem. In the Fuzzy Delphi method, considerably qualified experts an first requested to give their opinion seperately and without intercommunication. The forecasting data of experts consist of Triangular Fuzzy Number (T.F.N) which represents the pessimistic, moderate, and optimistic forecast of a stock exchange index. A statistical analysis and dissemblance index are then made of these subject data. These new information are then transmitted to the experts once again, and the process of reestimation is continued until the process converges to a reasonable stable forecast of stock exchange index. The goal of this research is to forecast the stock exchange index using F.D.M. in which subjective data of experts are transformed into quasi -objective data index by some statistical analysis and fuzzy operations. (a) A long range forecasting problem must be considered as an uncertain but not random problem. The direct use of fuzzy numbers and fuzzy methods seems to be more compatible and well suited. (b) The experts use their individual competency and subjectivity and this is the very reason why we propose the use of fuzzy concepts. (c) If you ask an expert the following question: Consider the forecasting of the price index of stocks in the near future. This experts wi11 certainly be more comfortable giving an answer to this question using three types of values: the maximum value, the proper value, and the minimum value rather than an answer in terms of the probability.
Soltanmohammadi, Mehdi;Saberi, Morteza;Yoon, Jin Hee;Soltanmohammadi, Khatereh;Pazhoheshfar, Peiman
Industrial Engineering and Management Systems
/
v.14
no.3
/
pp.221-235
/
2015
Risk assessment is an important phase of risk management. It is the stage in which risk is measured thoroughly to achieve effective management. Some factors such as probability and impact of risk have been used in the literature related to construction projects. Because in high-rise projects safety issues are paramount, this study has tried to develop a quantifying technique that takes into account three factors: probability, impact and Safety Performance Index (SPI) where the SPI is defined as the capability of an appropriate response to reduce or limit the effect of an event after its occurrence with regard to safety pertaining to a project. Regarding risk-related literatures which cover an uncertain subject, the proposed method developed in this research is based on a fuzzy logic approach. This approach entails a questionnaire in which the subjectivity and vagueness of responses is dealt with by using triangular fuzzy numbers instead of linguistic terms. This method returns a Risk Critical Point (RCP) on a zoning chart that places risks under categories: critical, critical-probability, critical-impact, and non-critical. The high-rise project in the execution phase has been taken as a case study to confirm the applicability of the proposed method. The monitoring results showed that the RCP method has the inherent ability to be extended to subsequent applications in the phases of risk response and control.
Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
v.48
no.3
/
pp.149-154
/
2022
Objectives: To measure tympanic bone thickness (anterior-superior, anterior-inferior, and inferior wall), external ear canal length, and tympanomandibular distance that can be useful in cases that undergo tympanic bone resection. Materials and Methods: The temporal computed tomography (CT) images of 349 patients were retrospectively evaluated. The anterior-inferior, anterior-superior, and inferior wall thicknesses; tympanomandibular distance; and external auditory canal (EAC) bone canal length were measured from the narrowest part of the canal. The shapes of the EAC in the coronal and sagittal planes were also examined. Results: The numbers of female and male patients were similar, and the mean age was 49.45±13.95 years. The anterior-superior, anterior-inferior, and inferior wall thicknesses were 1.92±0.60, 2.54±0.74, and 9.16±2.20 mm, respectively. The anterior-superior and anterior-inferior wall thicknesses and canal lengths were greater on the right side (P<0.001). All measurement values were higher in males, except right tympanomandibular distance (P<0.05). A non-significant negative correlation was found between the age of the participants and the left anterior-inferior wall and tympanomandibular distance on both sides. Intra-observer agreement was high for all measurements. We observed four main shapes in the external ear canal in the coronal plane: Type 3, Type 2, Type 1, and Type 4 in order of frequency on the right, and Type 2, Type 3, Type 1, and Type 4 on the left. In the sagittal plane, we detected three shapes: oval (74.4%), triangular (16.3%), and round (9.4%). Conclusion: The anterior wall thicknesses and tympanomandibular distance should be measured on preoperative temporal bone CT to safely perform tympanic bone anterior resection, which is required in some otological procedures, and also to prevent temporomandibular joint damage.
This study was performed to investigate the immunohistochemical and ultrastructural characterization of the choline acetyltransferase (ChAT)-immunoreactive nerve cells in the diagonal band of Broca of the rat basal forebrains, utilizing techniques of immunohistochemical and immunocytochemical microscopy. The ChAT-immunoreactivities were shown within neuronal cell bodies and processes by the light micoscope. According to cell shape and ratio of long axis vs short axis of cell body, the ChAT-immunoreaclive nerve cells in both vertical and horizontal limbs of the diagonal band of Broca were classified into 6 types. at the light microscopic level; round, oval, elongated, fusiform, triangular and polygonal types. As a result of the electron microscopic observation, the ChAT-immunoreactivated products appeared on the outer nuclear envelope, membranes of rough endoplasmic reticula (rER), free ribosomes and polysomes. Each cell type was subdivided into subtype I and II according to the several criteria such as volume of cell body, nuclear size relative to the cytoplasm, kinds and distribution of cell organelles and numbers and sorts of synapses. The subtype I of immnunoreactive nerve cells had large cell body and a small nucleus showing shallow indentations of nuclear evelope. In this subtype I with abundant cytoplasm, rER were well differentiated. Their long cisternae were parallelly ditributed and lamellated. One or two lamellar bodies and nematosomes were observed. The subtype II cell had small cell body and a large nucleus with deep indentations of nuclear envelope. In this subtype II with small cytoplasm, the rER were irregularly distributed and the lamellar body and nematosome were not found. A few axosomatic synapses in the subtype I and II were shown to be symmetric or asymmetric. The ratios of the symmetric synapse to the asymmetric one were investigated to be 1 : 2 and 1 : 4 in the subtype I and II, respectively. The axodendritic ones were almost asymmetric. But, the fusiform and triangular immunoreactive nerve cells were shown only to be subtype I. According to observations in this study, it is considered that the ultrastructural characterization in the 2 subtypes of each cell type may reflect the differences of the metabolic activities and projecting distances to the target cells.
Uncertainties are pervasive in engineering geological problems. Therefore, the presence of uncertainties and their significance in analysis and design of slopes have been recognized. Since the uncertainties cannot be taken into account by the conventional deterministic approaches in slope stability analysis, the probabilistic analysis has been considered as the primary tool for representing uncertainties in mathematical models. However, some uncertainties are caused by incomplete information due to lack of information, and those uncertainties cannot be handled appropriately by the probabilistic approach. For those uncertainties, the theory of fuzzy sets is more appropriate. Therefore, in this study, fuzzy reliability analysis has been proposed in order to deal with the uncertainties which cannot be quantified in the probabilistic analysis due to the limited information. For the practical example, a slope is selected in this study and both the probabilistic analysis and the fuzzy reliability analysis have been carried out for planar failure. In the fuzzy reliability analysis, the dip angle and internal friction angle of discontinuity are considered as triangular fuzzy numbers since the random properties of the variables cannot be obtained completely under the conditions of limited information. In the study, the fuzzy reliability index and the probabilities of failure are evaluated from fuzzy arithmetic and compared to those from the probabilistic approach using Monte Carlo simulation and point estimate method. The analysis results show that the fuzzy reliability analysis is more appropriate for the condition that the uncertainties arise due to incomplete information.
There is a system of mandating the allocation of support to small business in certain percentage or more to facilitate technological innovation at small business. Trying to assess small business R&D projects, which receive a budget of three trillion won or more from the government every year, for their possibilities of success, a group of experts perform a technological evaluation with their technologies and their difficulty levels and review closely the possibilities of their commercialization and success. Used in such a review, the Analytic Hierarchy Process technique cannot make an objective judgment of evaluation criteria for evaluation items and guarantee the professionalism and fairness of small business R&D projects due to the inherent ambiguity and uncertainty of the evaluation criteria. This study proposed an R&D evaluation system based on Fuzzy-AHP for small business to provide objective weight for the evaluation items and assess the possibilities of such projects' success. The evaluation criteria were make objective as they were applied as section values based on triangular fuzzy numbers. Weight was assigned and applied according to the management guidelines of supportive projects for small business' technological development so that it could be reflected on actual assessment. The findings of the study will be helpful for reflecting the scoring weight of these evaluation items again when an expert is appointed for a new project and guaranteeing the professionalism and fairness of small business R&D project based on them.
The first packaging of Korean market milk dates back to July 1937 when Seoul Dairy Co-operative (Kyung Seong Dairy Co-operative in those days) used 1 hob (180 ml) glass bottles with either paper caps or cork caps. During 1945-1972, 2 hob (360 ml) glass bottles were produced, and iron caps and egret-shaped plastic film replaced the previously used caps. When there were insufficient numbers of milk bottles, other glass bottles such as soda drink bottles and beer bottles were used instead. Seoul Dairy Co-operative was the only dairy company existing in Korea until Nam Yang Dairy Co. Ltd was founded in March 1964, followed by Hae Tae Dairy Co. Ltd(Tae Han Food Public Corporation in those days) in 1969 and Mae-il Dairy Co. Ltd (Korea Dairy Company in those days) in May 1971. As many other dairy companies along with the above-mentioned companies were established, a variety of dairy products were packaged and marketed. In 1971 Seoul Dairy Co-operative first used triangular-shaped polyethylene film wrappers, and in 1972 Nam Yang Diary was the first company importing sterilized Tetra pak for the packaging of milk. Since 1974 rectangular shaped polyethylene film wrappers and plastic bottles were used. In 1977 the gable top carton pack made of paper was first introduced by Seo Joo Industry Co. Ltd, and its market share increased rapidly with gradual increase in its volume, from 180ml to 200ml, to 250ml, to 500ml and finally to 1,000ml, causing change in the volume of milk consumption. And in Sep. 1987 Pasteur market milk Co. Ltd. first used round type high density polyethylene bottle(body) with low density polyethylene cap of 245g, 490g and 980g volumes respectively.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.