• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.62 no.1
• /
• pp.1-5
• /
• 2013

The aim of this study is to research maximum harvesting energy by the optimal input wave condition. The voltage characteristics of the PZT bimorph were investigated in terms of the sine wave, triangle wave and square wave according to frequency range 0~70Hz. It was found that the square wave compared with a triangular wave or square wave was showed the higher output energy. PZT bimorph was mechanically vibrated by solenoid coil experiments, which revealed two voltage peak mode according to frequency. Maximum voltage at second vibration frequency 28Hz demonstrated that the generated DC voltage was proportional to the tip displacement of the bimorph and the phase difference between the input frequency and bimorph vibration frequency was 90 degree. It was expected that optimized design to harvest a much higher energy level from lower frequency vibrations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.8
• /
• pp.2958-2962
• /
• 2010

We developed a Microcurrent acupuncture point treatment equipment using micro-controller AVR. This equipment can generate a sine wave, triangle wave, square wave and DC. The frequency range of waves like the sine wave and the triangle wave is 1 - 320 Hz and the output range of DC is $40-200\;{\mu}A$. The duration is controllable between a minute to 30 minutes.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.5
• /
• pp.203-216
• /
• 2021

Analyzing various wave interactions with oscillating wave surge converters (OWSC) is essential because they must be operated efficiently under a wide range of wave conditions and designed to extract optimal wave energy. In the conceptual design and development stage of OWSC, numerical analysis can be a good alternative as a design tool. This study performed a numerical analysis on the behavioral characteristics of the inverted triangle flap against the incident waves using open source CFD to examine the essential behavioral attributes of OWSC. Specifically, the behavioral characteristics of the structure were studied by calculating the free water surface displacement and the flap rotation angle near the inverted triangular flap according to the change of the period under the regular wave conditions. By comparing and examining the numerical analysis results with the hydraulic model experiments, the validity of the analysis performed and the applicability in analyzing the wave-structure interactions related to OWSC was verified. The numerical analysis result confirmed that the hydrodynamic behavior characteristic due to the interactions of the wave and the inverted triangle flap was well reproduced.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.5
• /
• pp.322-327
• /
• 2010

It is a critical task to keep the ventilation system working in a proper and efficient manner in large multi-storey buildings, and the enthalpy exchanger is becoming an increasingly important part of the ventilation system by playing the function of channeling heat and moisture. We present a computational study on the heat transfer performance of the cross-flow enthalpy exchanger, which is in large use for residential buildings. The ducts are considered whose cross-sectional shapes resemble triangle and longitudinal centerline a cosine wave. It is shown that, as the cross-sectional shape departs from triangle, the heat transfer performance of the duct tends to deteriorate. Also, applying the wave-like shape to the longitudinal centerline of the duct increases the rate of heat transfer and the applied pressure-gradient at the same time. The origin of the performance variations in the cases considered are quantitatively analyzed and discussed.

• Journal of the Optical Society of Korea
• /
• v.1 no.1
• /
• pp.26-35
• /
• 1997

Rigorous coupled-wave analysis (RCWA) with a simplified eigenvalue problem is used to investigate the an-tireflective property of one-dimensional surface-relief gratings such as binary gratings, triangular gratings and gratings with triangle-like surface profiles. The convergence of RCWA is investigated by varying the number of layers and the number of space-harmonics used in the computation. For unpolarized light normally incident on a medium of refractive index 1.64 from vaccum, a triangle-like grating shows the reflectivity of $1.6 {\times} 10^{-4}$ in contrast to a minimum reflectivity of $3.8 {\times} 10^{-3}$ for a binary grating. We also study the dependence of reflectivity on the wavelength, and on the angle of incidence for a groove shape and depth which result in minimum reflectivity.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.11
• /
• pp.21-30
• /
• 1998

In this paper, a digital current control system using a FPGA(Field Programmable Gate Array) was implemented, and the system was applied to an induction motor widely used as an industrial driving machine. The FPGA designed by VHDL(VHSIC Hardware Description Language) consists of a PWM(Pulse Width Modulation) generation block, a PWM protection block, a speed measuring block, a watch dog timer block, an interrupt control block, a decoder logic block, a wait control block and digital input and output blocks respectively. Dedicated clock inputs on the FPGA were used for high-speed execution, and an up-down counter and a latch block were designed in parallel, in order that the triangle wave could be operated at 40 MHz clock. When triangle wave is compared with many registers respectively, gate delay occurs from excessive fan-outs. To reduce the delay, two triangle wave registers were implemented in parallel. Amplitude and frequency of the triangle wave, and dead time of PWM could be changed by software. This FPGA was synthesized by pASIC 2SpDE and Synplify-Lite synthesis tool of Quick Logic company. The final simulation for worst cases was successfully performed under a Verilog HDL simulation environment. And the FPGA programmed for an 84 pin PLCC package was applied to digital current control system for 3-phase induction motor. The digital current control system of the 3 phase induction motor was configured using the DSP(TMS320C31-40 MHz), FPGA, A/D converter and Hall CT etc., and experimental results showed the effectiveness of the digital current control system.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.6
• /
• pp.1108-1114
• /
• 1992

In this paper results from experimental studies on the line wave detonation of explosive welding were presented. Using the ultra high speed comera, the ling wave generation during the bonding, process of composite materials was observed with an equilateral triangle lens. Experimental results confirmed the line wave formation of the shock front. And the results indicated the effectiveness of the ling wave detonation method in the explosive welding of similar or dissimilar metals.

• Proceedings of the KIPE Conference
• /
• 2010.11a
• /
• pp.17-19
• /
• 2010

In this paper, new PWM method is proposed to reduce input current THD of PWM Rectifier. In general, the carrier comparison PWM method is used for PWM rectifier in which triangle wave is used as a carrier wave. However, large d-axis current ripple by this method can be a source of large THD. In this paper, new carrier comparison PWM method is proposed in which sawtooth wave is used as a carrier wave. Depending on the phase of the voltage commands, the rising or falling sawtooth wave is selected to reduce the THD. The simulation results verified the performance of the proposed method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.9
• /
• pp.1625-1632
• /
• 2006

We studied the effects or electric potential in ST37(+) and ST39(-) generated by various the manual art stimulus or acupuncture at ST36. And compared with data on the change of electric potential from hand of performer acupuncture therapy. Electric potential induced via acupuncture from performer may be important factor that is the initiation of electric potential changes in meridian and meridian point of being performer. The results for various manual art stimulus in acupuncture therapy was that four type of electro-wave observed. That is the capacitance currents type, sign wave type, triangle wave type and circle type triangle wave. And the change of electric potential ransfer from performer acupuncture therapy in stable electro-circle condition, were capacitance currents type. So we suggested that capacitance currents stimulus in electronic view may be important factor in acupuncture therapy between performer acupuncture therapy and being performer acupuncture therapy.

• Journal of Advanced Navigation Technology
• /
• v.26 no.5
• /
• pp.344-349
• /
• 2022

A compact LPDA antenna consisting of right triangle-shaped dipole elements appended with strips is proposed for UWB applications. First, right triangle-shaped dipole elements are used instead of conventional strip dipole elements to reduce the width of the LPDA antenna. Second, the spacing between the LPDA elements is decreased to reduce the length of the LPDA antenna. Finally, strips are appended at the ends of the right triangle-shaped dipole elements in order to further reduce the width of the antenna. A prototype of the proposed antenna with 16 elements and gain > 4 dBi is fabricated on an FR4 substrate with dimensions of 44 mm×30 mm. Measured frequency band of the fabricated antenna is 2.99-14.76 GHz for a VSWR < 2, which ensures UWB operation, and measured gain range is 4.0-5.5 dBi with a front-to-back ratio larger than 10 dB. The length and width of the proposed compact LPDA antenna are reduced by 40.9% and 20.6%, respectively, compared to the conventional LPDA.