• Metals and materials international
• /
• v.24 no.6
• /
• pp.1256-1261
• /
• 2018

Both thermoplastic formability and electrical conductivity of Al-Ni-Y metallic glass with 12 different compositions have been investigated in the present study with an aim to apply as a functional material, i.e. as a binder of Ag powders in Ag paste for silicon solar cell. The thermoplastic formability is basically influenced by thermal stability and fragility of supercooled liquid which can be reflected by the temperature range for the supercooled liquid region (${\Delta}T_x$) and the difference in specific heat between the frozen glass state and the supercooled liquid state (${\Delta}C_p$). The measured ${\Delta}T_x$ and ${\Delta}C_p$ values show a strong composition dependence. However, the composition showing the highest ${\Delta}T_x$ and ${\Delta}C_p$ does not correspond to the composition with the highest amount of Ni and Y. It is considered that higher ${\Delta}T_x$ and ${\Delta}C_p$ may be related to enhancement of icosahedral SRO near $T_g$ during cooling. On the other hand, electrical resistivity varies with the change of Al contents as well as with the change of the volume fraction of each phase after crystallization. The composition range with the optimum combination of thermoplastic formability and electrical conductivity in Al-Ni-Y system located inside the composition triangle whose vertices compositions are $Al_{87}Ni_3Y_{10}$, $Al_{85}Ni_5Y_{10}$, and $Al_{86}Ni_5Y_9$.

• Fashion & Textile Research Journal
• /
• v.24 no.2
• /
• pp.206-216
• /
• 2022

This study sought to examine the sustainability criteria found in the global sourcing practices of global fashion retailers. Sustainable supply chain management, with a particular focus on the sustainability criteria of global sourcing, was analyzed. This qualitative study was based on a focus group interview and corporate social responsibility (CSR) annual reports. Eight master categories, 18 middle categories, and 37 bottom categories were extracted. The key categories and their middle categories were as follows: (1) Social compliance (working conditions, employment, safety); (2) Environment concerns (environmental pollution management, eco-friendly production, supply chain environment); (3) Energy efficiency (energy saving program, store environment); (4) Consumer protection (restricted substances management, consumer product safety improvement); (5) Management system (code of conduct, triangle audit system); (6) Community social activities (local community service, voluntary activities, charitable activities); (7) External stakeholder engagement (media & non-governmental organization management, maintenance of relationship with local authority); (8) Brand protection (respect for companies' intellectual property). The findings of this study offer academically significant insights into the sustainability criteria that can be encountered by companies under diverse global sourcing scenarios, revealing that global sourcing by fashion retailers is not merely a means of reducing costs, but a way of generating new jobs and making a social contribution to developing countries. The study's findings also have practical significance, offering guidelines for general CSR activities in the global sourcing process.

• Journal of Family Resource Management and Policy Review
• /
• v.26 no.1
• /
• pp.59-73
• /
• 2022

This qualitative study focused on the activation of cooperative child care sharing centers'. Eight centers nationwide were selected as example cases in accordance with region (large city, small and medium-sized city, county unit), opening time, operating institution, location, full-time care for dual-income children, and participation in the 2020 care community pilot project. Co-researchers visited each center together to observe the site and conducted in-depth interviews with the head of the center or dedicated staff using semi-structured questionnaires. Interview data were analyzed using triangle verification and transcribed : the data were then grouped into 12 categories and 34 subcategories. From this, the following three topics were derived: the main functions, operational difficulties, and activation conditions. In conclusion, four suggestions are made: 1. proper relationship with the Family center, the cooperative childcare sharing center, and the local care communities 2. activation plan through "solution of operational difficulties" 3. "extension" of the cooperative child care sharing center 4. the role of the Ministry of Gender Equality and Family, the Korea Institute for Healthy Family, local governments, and Family Centers.

• Korean Journal of Environmental Biology
• /
• v.39 no.4
• /
• pp.423-434
• /
• 2021

Two new free-living marine nematodes of the genus Belbolla Andrássy, 1973 belonging to family Enchelidiidae are newly described based on specimens obtained from a shallow subtidal sediment of the western and southern outermost islands of Korea. Belbolla koreensis sp. nov. differs from other species of the genus by the combination of the following characteristics: longer body length (3,080-3,462 ㎛ long), eight oesophageal bulbs in the posterior region of pharynx, well-developed two winged precloacal supplements (anterior precloacal supplement slightly longer than posterior one: 47-59 ㎛ vs. 43-46 ㎛ long), strongly arcuated, very thick, L-shaped spicule (122-127 ㎛ long, 1.7-1.9 anal body diameter(a.b.d.) long) with three separated blunt distal tips, and well-developed relatively long cylindrical shaped gubernacular apophysis with blunt teeth covering two thirds of the dorsal margin (57-58 ㎛ long, 0.8-0.9 a.b.d. long). Belbolla hoonsooi sp. nov. is characterized by the following combination of characteristics: longer body length (3,494 ㎛ long), eight oesophageal bulbs in the posterior region of pharynx, well-developed two winged precloacal supplements (anterior precloacal supplement slightly longer than posterior one: 43 ㎛ vs. 36 ㎛ long), strongly arcuated, L-shaped spicule (119 ㎛ long, 1.5 a.b.d. long) with three separated blunt distal tip, and well-developed relatively long inverted triangle shaped gubernacular apophysis with blunt teeth covering half of the dorsal margin (45 ㎛ long, 0.6 a.b.d. long). Detailed morphological characteristics and illustrations of two new Belbolla nematodes from the Korean seawaters were provided by differential interference contrast microscopy. Comparative tables on biogeographical and morphological characteristics of Belbolla species are also provided herein.

• Analytical Science and Technology
• /
• v.22 no.3
• /
• pp.247-253
• /
• 2009

Porous silicon films are electrochemically etched from crystalline silicon wafers in an aqueous solution of hydrofluoric acid(HF). Careful control of etching conditions (current density, etch time, HF concentration) provides films with precise, reproducible physical parameters (morphology, porosity and thickness). The etched pattern could be varied due to (1) current density controls pore size (2) etching time determines depth and (3) complex layered structures can be made using different current profiles (square wave, triangle, sinusoidal etc.). The optical interference spectrum from Fabry-Perot layer has been used for forensic applications, where changes in the optical reflectivity spectrum confirm the identity. We will explore a method of identifying the specific pattern code and can be used for identities of individual code with porous silicon based encoded nanosized smart particles.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.5
• /
• pp.533-541
• /
• 2007

The Zienkiewicz-Zhu(Z/Z) error estimate is slightly modified for the hierarchical p-refinement, and is then applied to L-shaped plates subjected to bending to demonstrate its effectiveness. An adaptive procedure in finite element analysis is presented by p-refinement of meshes in conjunction with a posteriori error estimator that is based on the superconvergent patch recovery(SPR) technique. The modified Z/Z error estimate p-refinement is different from the conventional approach because the high order shape functions based on integrals of Legendre polynomials are used to interpolate displacements within an element, on the other hand, the same order of basis function based on Pascal's triangle tree is also used to interpolate recovered stresses. The least-square method is used to fit a polynomial to the stresses computed at the sampling points. The strategy of finding a nearly optimal distribution of polynomial degrees on a fixed finite element mesh is discussed such that a particular element has to be refined automatically to obtain an acceptable level of accuracy by increasing p-levels non-uniformly or selectively. It is noted that the error decreases rapidly with an increase in the number of degrees of freedom and the sequences of p-distributions obtained by the proposed error indicator closely follow the optimal trajectory.

• Journal of Korea Water Resources Association
• /
• v.48 no.4
• /
• pp.291-298
• /
• 2015

The aim of this study is that a theoretical formula for estimating the one-dimensional longitudinal dispersion coefficient is derived based on a transverse distribution equation for the depth averaged stream-wise velocity in open channel. In "Part I. Theoretical equation for stream-wise velocity" which is the former volume of this article, the velocity distribution equation is derived analytically based on the Shiono-Knight Model (SKM). And then incorporating the velocity distribution equation into a triple integral formula which was proposed by Fischer (1968), the one-dimensional longitudinal dispersion coefficient can be derived theoretically in "Part II. Longitudinal dispersion coefficient" which is the latter volume of this article. SKM has presented an analytical solution to the Navier-Stokes equation to describe the transverse variations, and originally been applied to straight and nearly straight compound channel. In order to use SKM in modeling non-prismatic and meandering channels, the shape of cross-section is regarded as a triangle in this study. The analytical solution for the velocity distribution is verified using Manning's equation and applied to velocity data measured at natural streams. Although the velocity equation developed in this study do not agree well with measured data case by case, the equation has a merit that the velocity distribution can be calculated only using geometric data including Manning's roughness coefficient without any measured velocity data.

• Archives of design research
• /
• v.11 no.2
• /
• pp.31-45
• /
• 1998

Human beings receive experiences and education in viewing and manipulating objects since birth, These experiences in forms and colours influence signifrcantty the formation of the person's humanity, sensibility and constituOOn until he becomes an adult. Considering that all objects coexist through space and time with human beings from birth to an adulthood, we can imagine how these things shape a person, Human beings' perception of form and colour might be different according to the person's living environment, experiences, education, age and job, However, when we see there are certain kinds of form and colour of that most people favor, we can understand that human beings have a certain inherent feelings about forms and colours, Let's suppose a man faces an object that dosen't correspond with his basic feelings about form and colour, He would avoid that object at least unconsoousty, All of his acts dealing with form and colour probably satisfy a desire for beauty which can be required from certain proper forms and colours, By revealing the feelings about forms and colours that human beings originally have, this study is going to explore what kinds of form and colour have what kinds of psychological and physical influences on human beings. Another purpose of this study is to be a theory suggesting more profitable and effective forms and colours psychologically and physically to the consumer. this study demonstrates that the basic feelings about forms and colours which human beings possess are different according to the individual's psychology and the body's condition. It also establishes the reality of the principle of how human psychology and the body change according to the surrounding environment. Finally, it will be appropriate for the suggested theory from this study to be used as fundamental material in deciding the forms and colours used in the design field in the future in that these forms and colours are more profitable and efftient.

• Journal of Life Science
• /
• v.16 no.4
• /
• pp.626-631
• /
• 2006

This study was carried out to investigate the physical characteristics (height, body lenght, chest depth, head type, ear type, body color, eye type and tail type) and genetic diversity using 15 microsatellite DNA markers (PEZ 1, 5, 8, 10, 11, 12, 13, 15, 16, 17, 20, 21, FHC 2010, FHC 2054 and FHC 2079) in 44 random Miryang native dogs(6 months${\sim}$12 years old). The height, body lenght, and chest depth of Miryang native dogs were 43-55 cm(mean 49.5 cm), 45-60 cm(mean 54.3 cm), and 50-64 cm(mean 57.9 cm), respectively. Miryang native dog was medium sized. The head and eye type were reverse-triangle(100%), triangle (90.9%) and newborn moon(9.1%), respectively. Most of body color had white coat color(93.2%), light pink tongue color(100%), light black anal color(90,9%) and pink claw color(100%). The ear type showed erect ear(100%), and half-curled(56.8%), upward(34.1%), curled(9.1%) in tail type, respectively. Number of alleles observed at a single locus ranged from 2 (PEZ 21 and FHC 2010) to 14 (PEZ 13), with average number of alleles per locus of 6.13. The expected heterozygosities of 15 microsatellite loci were estimated based on gene frequencies. The highest expected heterozygosity, 0.863 was estimated in PEZ 13 locus and the lowest, 0.455 in PEZ 21 and FHC 2010 locus. And the mean expected heterozygosity of 15 microsatellite markers was calculated as 0.635. Polymorphic information content (PIC) values were ranged from 0.348 (PEZ 21 and FHC 2010) to 0.837 (PEZ 13), and the mean PIC value was calculated as 0.570. Of the 15 markers, PEZ 10, PEZ 13, PEZ 17 and FHC 2054 loci have relatively high PIC value (> 0.7) in Miryang native dog. In order to determine the efficieney of parentage control, exclusion probabilities (PE) were calculated for each allele. The highest PE 1 and PE 2 in PEZ 13 locus was caculated to 0.548 and 0.710, respectively. And the total exclusion power in PE 1 and PE 2 was calculated to 0.9895 and 0.9996, respectively. These results can give basic information for perservation and research in Miryang native dog, and phylogenetic relationships of the Korean native dog and Asian dog breeds.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_1
• /
• pp.1211-1224
• /
• 2023

Clouds cause many difficult problems in observing land surface phenomena using optical satellites, such as national land observation, disaster response, and change detection. In addition, the presence of clouds affects not only the image processing stage but also the final data quality, so it is necessary to identify and remove them. Therefore, in this study, we developed a new cloud detection technique that automatically performs a series of processes to search and extract the pixels closest to the spectral pattern of clouds in satellite images, select the optimal threshold, and produce a cloud mask based on the threshold. The cloud detection technique largely consists of three steps. In the first step, the process of converting the Digital Number (DN) unit image into top-of-atmosphere reflectance units was performed. In the second step, preprocessing such as Hue-Value-Saturation (HSV) transformation, triangle thresholding, and maximum likelihood classification was applied using the top of the atmosphere reflectance image, and the threshold for generating the initial cloud mask was determined for each image. In the third post-processing step, the noise included in the initial cloud mask created was removed and the cloud boundaries and interior were improved. As experimental data for cloud detection, CAS500-1 L2G images acquired in the Korean Peninsula from April to November, which show the diversity of spatial and seasonal distribution of clouds, were used. To verify the performance of the proposed method, the results generated by a simple thresholding method were compared. As a result of the experiment, compared to the existing method, the proposed method was able to detect clouds more accurately by considering the radiometric characteristics of each image through the preprocessing process. In addition, the results showed that the influence of bright objects (panel roofs, concrete roads, sand, etc.) other than cloud objects was minimized. The proposed method showed more than 30% improved results(F1-score) compared to the existing method but showed limitations in certain images containing snow.