• 한국전기전자재료학회논문지
• /
• 제13권12호
• /
• pp.1063-1068
• /
• 2000

Water treeing in underground distribution power cable is not easy to observe by nondestructive method and it has very complex patterns. This study describes the principles and practices of a continuous observation of initiation and growth of tree in polymeric insulation material using an image measurement technique. Using this technique we could observe water tree and the growing process of electrical tree due to the water tree and the growing process of electrical tree due to the water tree. All of these growing process is analyzed quantitatively by image measurement program composed of borland c++. We fabricated the thin film type specimen to observe water tree easier and also the needle electrode was prepared by etching method using electrolytes. Initiation and the growth of three was observed somewhat different depending on the applied voltage and the water electrode. AgNO$_3$solution electrode accelerates the initiation and the growth of water tree, compared to those of distilled water electrode. The water and the electrical tree occurred by water tree has discontinuous growth characteristic.

• 한국산림과학회지
• /
• 제3권1호
• /
• pp.28-31
• /
• 1963

Recognizing shortcomings and unreasonable points of the usual methods of measurement of the standing-tree volume, author contrived measurement formula of standing-tree volume which is based on stem-curve equation, $y^2=2px$, resulted from the analysises and experiments on stem-curve by differentiation & integration. The results of this study are as follows ; (1) The following is the formula. $V=1/2g_{1.2}$(h+1.2) V=volume of tree $g_{1.2}$ = sectional area at breast heigh h = height of tree (2) So plain is the form of this formula that this formula is more convenient than usual formulas in measuring. (3) The percentage error of this formula is negative and it is remarkably superior to usual formulas except Pressler's formula, in other words, the higher the tree that is measured is, the more inaccurate become pressler's formula, and the percentage error of the breast-height form factor method is direct proportion to the grossness of the tree that is measured, but the higher the tree that is measured, the lower become percentage error of this formula in geometrical progression.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.270-273
• /
• 2001

Electrical tree is studied widely by manufacture state of insulating material fare and blazing fire diagnosis system of use in phenomenon of part discharge that happen for main cause of dielectric breakdown of equipment for electric power. Use process that draw tree pattern here measuring above zero to study special quality of this electricity tree, real-time processing by image processing is proposed because reproduction of tree blazing fire process drops and pattern of tree is difficult correct quantification of tree growth by existent visual observation by involution. This research presents general process that need in image processing of tree blazing fire, and that remove various noises that happen in above zero by measuring electrical tree dividing background and complete view in measured above zero taking advantage of specially proposed complete view object abstraction techniques effectively and quantification of tree becomes easy naturally, can apply to dielectric breakdown estimate because can chase growth process of tree.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 추계학술대회 논문집
• /
• pp.122-128
• /
• 1994

Studies on treeing phenomena have depended on the visual measurement using optical microscope. In the visual measurement, it is difficult to analyze the treeing in real time because voltages are applied discontinuously and impossible to calculate the deterioated area by treeing. Only tree type and length are studied. In this paper, image processing is introduced and voltages are applied continuously. The tree length and area are calculated in real time from tree inception to breakdown. Growing characteristics about tree types are compared for the normalized breakdown time.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.19-23
• /
• 1998

Water tree degradations have been considered as one of the most important causes of failure in underground distribution cables with polymeric insulation. Water tree growth is a preliminary step in the sequence of electrical tree initiation and electrical breakdown of the insulation. In this paper, needle electrode is made use of the etching methods and the pellet type specimen is made to observe the water tree in succession. In previous methods are able to observe the tree degradations without cutting and dyeing. The water tree image is recorded on VTR with CCD camera. The tree length of X, Y axis direction and aging area(treeing area) are calculated with image measurement. As a result of this study, water tree is observed by non-destructive method. Electrical tree is initiated from needle electrode tip only but water tree is initiated from total area of water electrode. Electrical tree owing to water treeing is initiated at low electric field and grown with discontinuously. Namely, water tree is shown up a different characteristics of tree growth.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.270-273
• /
• 2001

Electrical tree is studied widely by manufacture state of insulating material fare and blazing fire diagnosis system of use in phenomenon of part discharge that happen for main cause of dielectric breakdown of equipment for electric power. Use process that draw tree pattern here measuring above zero to study special quality of this electricity tree, real-time processing by image processing is proposed because reproduction of tree blazing fire process drops and pattern of tree is difficult correct quantification of tree growth by existent visual observation by involution. This research presents general process that need in image processing of tree blazing fire, and that remove various noises that happen in above zero by measuring electrical tree dividing background and complete view in measured above zero taking advantage of specially proposed complete view object abstraction techniques effectively and quantification of tree becomes easy naturally, can apply to dielectric breakdown estimate because can chase growth process of tree.

• 한국조경학회지
• /
• 제49권5호
• /
• pp.59-70
• /
• 2021

본 연구는 한국 조경수목의 근원직경 측정의 모호성으로 생산자와 시공자 간의 검측 기준이 달라서 발생되는 분쟁을 줄일 수 있는 합리적인 근원직경 측정 위치 설정 방안에 대하여 실증 조사·분석하였다. 조경수목의 근원직경 측정 부위별 차이는 지하부 -6cm에서 표토부인 0cm까지는 3.59cm이었고, 지상부의 표토 0cm에서부터 6cm까지는 1.35cm로 근원직경의 측정위치별 차이는 지상부보다는 지하부에서 더 크게 나타났다. 조경수목 근원직경의 표준편차의 크기는 지하부 -6cm에서 표토부인 0cm까지는 0.64이었고, 지상부의 표토 0cm에서부터 6cm까지의 표준편차 차이는 0.16으로 근원직경의 측정위치별 차이는 지상부보다는 지하부에서 더 크게 나타났다. 조경수목 근원직경의 합리적 측정 위치 설정은 근원직경 측정 위치별 규격의 크기 변화 추세선에서 수간직경의 표준편차가 가장 적어지는 변곡점으로 설정하는 것이 제안되었다. 수종별 합리적인 측정 위치는 산딸나무 지상 18cm, 이팝나무 지상 12cm·느티나무 지상 12cm·팽나무 지상 12cm, 때죽나무 지상 10cm·산수유 지상 10cm, 단풍나무 지상 6cm·먼나무 지상 6cm, 가시나무 지상 4cm, 배롱나무 지상 2cm 이상으로 나타났다. 조경수목 근원직경 측정 부위별 차이가 공시수종 전체에서 표준편차가 작고, 편차의 기울기가 안정적인 합리적인 평균 측정위치는 지상부 평균 12cm 이상으로 나타났다. 조경수목 근원직경의 합리적인 측정위치 설정은 지상부 평균 12cm 이상에서부터라고 할 수 있으나 전통적인 관행상으로 익숙한 1자(尺) 30cm 인식이 빠르며, 측정자의 측정 위치의 편리성, 외국의 조경수목 측정기준에 대한 통일성 등 조경수목 근원직경의 합리적인 측정위치는 지표면 30cm 높이에서 측정하는 것이 좋을 것으로 추천되었다.

• 한국조명전기설비학회지:조명전기설비
• /
• 제8권1호
• /
• pp.57-62
• /
• 1994

영상처리 방식을 이용하여 유기 절연재료의 트리잉 열화를 측정하였다. 전통적으로 목측(가시측정)에 의한 트리현상 변화를 관찰해 왔으나 트리형상 특징과 변화를 이해하는데 정확한 측정에 어려움을 만들었다. 영상처리 시스템을 이용한 트리 측정장치를 이용하여 트리진전길이와 열화면적들의 고유특성을 영상처리 시스템을 이용하여 목측치와 거의 대등한 결과가 나오는 트리진전 영상처리 자동계측 시스템을 구현하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집
• /
• pp.19-22
• /
• 2004

Growth of Electrical Tree Under 50Hz~60Hz high electric stress has been studied on the Occurrence of a Pattern, to the Progression Speed at Y axis of electrical Tree. CCD Images of evolving tree structures could be obtained in both systems. Electrical Treeing was found to occur reproducibly, but in a markedly different manner in the two morphologimlly different but chemically identical materials. For the measurement of Electrical Tree, a visual measurement with an optical microscope has been used to explain breakdown mechanism in High-voltage systems.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1990년도 추계학술대회 논문집
• /
• pp.23-25
• /
• 1990

In this paper, a system to measure tree degradation of three dimensional phenomena in organic insulating materials using image processing system is discussed. Using a computerized tomography method, volume of tree immediately after tree initiation, as well as changes in the configuration of the tree were measured, which up to now have been difficult to measure. The specimens used an acrylic acid resin. As a result, it was possible to record the cross sections of the tree, and to describe the volume of the tree by the three dimensional measurement.