• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1990.10a
• /
• pp.23-25
• /
• 1990

In this paper, a system to measure tree degradation of three dimensional phenomena in organic insulating materials using image processing system is discussed. Using a computerized tomography method, volume of tree immediately after tree initiation, as well as changes in the configuration of the tree were measured, which up to now have been difficult to measure. The specimens used an acrylic acid resin. As a result, it was possible to record the cross sections of the tree, and to describe the volume of the tree by the three dimensional measurement.

• Journal of Korean Society of Forest Science
• /
• v.34 no.1
• /
• pp.21-30
• /
• 1977

Japanese larch (Larix leptolepis) is one of main timber species in Korea that could find much plantation and growing stands on all over the country. It is thought to be in meaningful that a guiding diagram for density control of Japanese larch stands is made to estimate easily the density conditions in the quantitaive, ecological and economic viewpoint. Sample plots for this study are selected from the stands that have not been thinned in recent years, and mean height, mean diameter, dominant height, tree numbers per hectare and stem volume of mean tree are calculated from the each sample plots among total 165 plots In this study, especially, the theory of slenderness of mean tree are applied, that have been identified through the results of the spacing trial. Relative growth characteristics of this species are calculated from the general logistic curve and its formula is $Y=ax^b$. Relatwion between the measured items are found out as follows: 1. Relation between the mean height and tree numbers per hectare by slender class is showing the high correlation as table 1 and fig. 2, and between mean diameter and tree numbers per hectare is also high correlation as table 1 and fig 3. 2. The stem volume can be correctly estimated from height in case that slender class may be known, as showing in table 3 and fig. 4. 3. The stem volume can be more correctly estimated from the relation with $D^2H$ as formula, $Log_e\;V=0.9569\;Log_eD^2H-9.8431$, and relation between stem volume of single tree or volume per hectare and tree numbers per hectare are as following formulas: $Log_e$ stem volume=9.5026-1.6800 $Log_e$ tree numbers per hectare $Log_e$ stem volume per hectare=9.4911-0.6784 $Log_e$ tree numbers per hectare. Stem volume of mean tree, tree numbers per hectare and stem volume per hectare correspond to the mean tree height are calculated to slender class as table 5, 6, 7. Through the above steps, the diagram for density control of Japanese larch are produced as fig. 9. It is thought that this diagram could be applied to control the density of Japanese larch stands.

• Journal of People, Plants, and Environment
• /
• v.24 no.4
• /
• pp.441-450
• /
• 2021

Background and objective: The purpose of study is to analyze the three-dimensional (3D) structure by creating a 3D model for green spaces in a park using unmanned aerial vehicle (UAV) images. Methods: After producing a digital surface model (DSM) and a digital terrain model (DTM) using UAV images taken in Mureung Park in Chuncheon-si, we generated a digital tree height model (DHM). In addition, we used the mean shift algorithm to test the classification accuracy, and obtain accurate tree height and volume measures through field survey. Results: Most of the tree species planted in Mureung Park were Pinus koraiensis, followed by Pinus densiflora, and Zelkova serrata, and most of the shrubs planted were Rhododendron yedoense, followed by Buxus microphylla, and Spiraea prunifolia. The average height of trees measured at the site was 7.8 m, and the average height estimated by the model was 7.5 m, showing a difference of about 0.3 m. As a result of the t-test, there was no significant difference between height values of the field survey data and the model. The estimated green coverage and volume of the study site using the UAV were 5,019 m² and 14,897 m³, respectively, and the green coverage and volume measured through the field survey were 6,339 m² and 17,167 m³. It was analyzed that the green coverage showed a difference of about 21% and the volume showed a difference of about 13%. Conclusion: The UAV equipped with RTK (Real-Time Kinematic) and GNSS (Global Navigation Satellite System) modules used in this study could collect information on tree height, green coverage, and volume with relatively high accuracy within a short period of time. This could serve as an alternative to overcome the limitations of time and cost in previous field surveys using remote sensing techniques.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.2 no.2
• /
• pp.79-86
• /
• 1999

This study was carried out to estimate the area of damaged forest and the volume of stand tree in burned area, Mt. Weol-A in eastern Chinju, Korea using digital maps derived from supervised classification of Landsat thematic mapper(TM) imagery as reference data. Criterion laser estimator and WinDENDRO$^{tm}$(v. 6.3b) system as a computer-aided tree ring measuring system were used to measure a volume and age of sampled tree. The sample site had been chosen in unburned areas having the same terrain condition and forest type of burned areas. The tree age, diameter at breast height, tree height and volume of the sample tree selected from sample site in unburned area were 27years, 20.9cm, 9.7m and $0.1396m^3$ respectively. Total stand volume of sample site was estimated $2.9316m^3$/0.04ha, Damaged stand volume evaluated to about $16,007m^3$ in the burned area of 218.4ha.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.34 no.5 s.118
• /
• pp.70-75
• /
• 2006

The purpose of this study is to explore the effects of difference in urban tree plantings on microclimate amelioration, and to suggest essential information for quantifying urban energy budgets and energy savings. This study was focused on measuring and analyzing air temperature and relative humidity in summer. Daytime air temperatures at places with 8%, 24%, 44%, 79%, and 100% cover of woody plants were, respectively, $0.6^{\circ}C,\;1.3^{\circ}C,\;2.4^{\circ}C,\;3.5^{\circ}C,\;and\;4.8^{\circ}C$ cooler, compared to a place with 0% cover. A 10% increase of woody plant cover was estimated to reduce the temperature by approximately $0.55^{\circ}C$. The temperature reduction effects were relatively greater between places with lower cover of woody plants than between those with higher cover. Woody plant cover and crown volume were the appropriate indicators which quantified the effects of tree plantings on air temperatures, based on the correlation analysis. Regression equations to estimate temperature change ($Y:^{\circ}C$) using woody plant cover ($X_1:%$) or crown volume ($X_2:m^3$) as independent variables are as follows: $$1nY=3.3233-0.0018X_1\;(r^2=0.99,\;p<0.0001)\;Y=27.5297-0.0019X_2\;(r^2=0.96,\;p=0.0007)$$

• Journal of Korean Society of Forest Science
• /
• v.95 no.5
• /
• pp.595-600
• /
• 2006

The plot design influences the budgets and the precision of forest inventory results. The objective of this study is to determine the efficiency of estimating forest variables such as tree density, basal area, volume, and species richness based on various plot sizes using fixed-area plot sampling in the natural deciduous forest of Pyeong-Chang County, Gang-won Province, Korea. In this study, 108 reference plots were established with a fixed plot size and shape of 0.09 ha ($30m{\times}30m$). In order to determine the optimal plot size for the interest of variables, each sample plot was established using different shapes (square, circle, and rectangle) and was divided into different plot sizes from 100 to $900m^2$. The mean relative difference (MRD) for the sum of the basal area and volume, and tree density per hectare decreased as plot size increased. But the MRD for three variables were only below 13% at the plot size of $500m^2$. Species richness for each reference stand observed ranging from 2 to 15 species, demonstrated highly positive significant relationships with plot size. The minimum plot size for the estimation of tree density, the sum of the BA and volume was determined to be about $400m^2$, whereas the estimation of species richness required a minimum plot size of $500m^2$.

• Korean Journal of Environmental Biology
• /
• v.21 no.3
• /
• pp.251-256
• /
• 2003

Baseline data on the type, species and volume for dead trees were collected from old growth fir (Abies holophylla) forest in Sorak National Park. Though the survey was restricted to fly forest, a basic data compatible to those in other countries were collected. Besides fir, dead trees were also found in deciduous species. All the Known dead tree types were found. Average volume of dead tree in the surveyed area was 00.42 $\textrm{m}^2 \; ha^{-1}$. There seems no correlation existing between the distributions of dead tree and coarse woody debris (CWD).

• Korean Journal of Computational Design and Engineering
• /
• v.8 no.2
• /
• pp.75-83
• /
• 2003

In this paper, OSP(Octal Space Partitioning) tree is proposed for the real time culling of infinite sets of geometries in interactive Virtual Environment applications. And MSVBSP(Modified Shadow Volume BSP) tree is suggested for the occlusion culling. Experimental results show that the OSP and MSVBSP tree are efficiently implemented in real time rendering of interactive geometries.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.10
• /
• pp.1305-1313
• /
• 2013

In this study, a method to apply feature-based simplification to boundary representation models is proposed. For feature-based simplification, a volume decomposition tree is created from a boundary representation model. The volume decomposition tree is represented by regularized Boolean operations of additive volumes, subtractive volumes, and fillet/round/chamfer volumes, and it is generated by stepwise volume decomposition, which consists of fillet/round/chamfer decomposition, wrap-around decomposition, volume split decomposition, and cell-based decomposition. After the volume decomposition tree is transformed to an infix expression, the CAD model can be simplified by reordering the volumes. To verify the proposed method, a prototype system was implemented, and experiments on test cases were conducted. From the results of the experiments, it is verified that the proposed method is useful for simplifying CAD models based on boundary representation.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.2
• /
• pp.39-48
• /
• 2000

The purpose of this study is to investigate the factors affecting temperature of urban parks to grasp the relationship between the land coverage in open space as well as the forest condition and decreasing city temperature by difference of purposed are. Futhermore, this research interpreted the relationship between wind direction, air temperature, the land coverage of the green space, the number of tree, green volume, height of tree and the mitigation of city temperature with the revolution analysis. The result of this study is that cool air in open space move leeward and decreasing city temperature is influenced by the difference of the land coverage in open space. Specifically, in order of the arbo $r_{-a}$rbor in the forest zone, the increase of the number of trees was related with temperature surrounding significantly. This study found that the use possibility of the green volume was recognized as the index of the green volume relative to air temperature surrounding. Green space of the city control area is more effective decreasing temperature than that of housing zone.