• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2000년도 제7차 국제 심포지움(생약자원개발에 관한연구) 및 추계정기 학술발표회 초록집
• /
• pp.16-17
• /
• 2000

Aralia elata is found in mountain areas all over Korean peninsula. Aralia elata is the scientific name for Japanese angelica tree. The tree belongs to the family Araliaceae, commonly known as ginseng family. Bud sprouts from apical shoot tip of the plants are rich in flavor and thus mainly used for both folk medicine and vegetable. The stalks with apical buds are gathered in the early spring and planted in sandy soil or water in the greenhouse. The sprouting buds are then collected and sold as fresh vegetable. Although the plants have been used for food, they have been cultivated in a very small scale. In spring, local farmers just go around mountain areas to search the trees and gather the stalks as much as they get and sell them to the market. No conservation efforts have been made to stop the exploitation or to save the dwindling population. We tried to provide local farmers with the plants that may be used as an alternative to stalks from wild populations. This will hel! p conserve the wild populations. However, it is hard to propagate them either by conventional cuttings or by seed germination in a short period of time. Mass propagation using tissue culture systems have shown a great promise with several woody plants. Recently we developed a mass propagation technique via somatic embryogenesis system using mature and/ or juvenile explants for Aralia elata. Several factors affecting somatic embryogenesis system including SE(somatic embryo) induction, embryogenic callus proliferation, SE germination, plant regeneration and transplanting to field will be presented. And some problems arising for the somatic embryogenesis system will be also discussed.lso discussed.

• 한국전자파학회논문지
• /
• 제21권3호
• /
• pp.301-306
• /
• 2010

본 논문에서는 도심과 같이 전기적으로 큰 환경에서 광선 추적법의 광선 추적을 통한 트리 구성 및 부트리 사용에 있어서 부트리 재사용을 통한 트리 생성 효율을 높이기 위해 신호원 독립 부트리 방법을 제안하였다. 신호원 독립 부트리 방법의 적용 결과, 피코셀 및 마이크로셀에서의 노드 개수가 트리 깊이 6에서 100배 감소하는 것을 확인하였으며, 노드 재사용 효율 분석을 통해 송신 위치가 변해도 전체 노드 중 88~98 %가 재사용되는 것을 확인하였다. 그러므로 제안된 신호원 독립 부트리 적용을 통해 광선 추적법 성능 개선은 물론 다중 안테나 또는 기지국 최적화와 같은 다중 송신기 사용 시 노드 재사용으로 인한 성능 개선에 유용하다.

• Journal of Plant Biotechnology
• /
• 제37권4호
• /
• pp.343-356
• /
• 2010

Plant micropropagation techniques include bud cultures using apical or axillary buds, organogenesis through callus culture or adventitious bud induction, and somatic embryogenesis. In Korea Forest Research Institute (KFRI), the first tissue culture trial in woody plant was initiated from the bud culture of hybrid poplars (Populus alba x P. glandulosa) in 1978. Since then several mass propagation techniques have developed from conifer and hardwood species, resulting in allowing practical application to Poplars, Birches and some oak species. In addition, useful micropropagation and genetic resources conservation techniques were established in some rare and endangered tree species including Abeliophyllum distichum. Among various in vitro propagation techniques, somatic embryogenesis is known to be the most efficient plant regeneration system. Since the first somatic embryo induction was reported in Tilia amurensis by KFRI in 1986, various protocols for direct or indirect somatic embryogenesis systems have developed in conifer and hardwood species including Larix leptolepis, Pinus rigida x P. taeda F1, Kalopanax septemlobus and Liliodendron tulipifera, etc. However, most of these technologies have been developed using juvenile tissues, i.e. immature zygotic embryos or mature embryos. Therefore it has been difficult to directly application to tree breeding program due to their unproven genetic background. Recently remarkable progresses and new approaches have been achieved in mature tree somatic embryogenesis. In this article we reviewed several micropropagation techniques, which have been mainly developed by KFRI and recent international progresses.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.476-480
• /
• 2003

Polyethylene used as insulating material of power cable is nonpolar and low dielectric loss polymer. But it has defects of tree generation and accumulation of space charge by an applied voltage resulting in the decreased life and performance. To solve these problems, mixed films with LLDPE and EVA that is similar to LLDPE at physical properties in case of low VA contents were made and tested due to the blend ratios of 80:20, 70:30, 60:40 and 50:50[wt%] respectively. We investigated AC electrical treeing characteristics to acquire the best mixture ratio and effect of the tip radius of needle electrode to develop excellent treeproof materials. The degree of crystallity calculated with XRD pattern is higher for pure LLDPE, 50:50 and 70:30. For DSC analysis, it is confirmed that the melting points of mixed specimens are lower than that of pure LLDPE and higher than pure EVA's. The shape of tree propagation showed that pure EVA was electrical tree shape of the branch type, pure LLDPE and blended specimens was able to confirm tree shape of the bush type. As the tip radius go up in the blend ratio 70:30 specimen, the tree inception voltage rise. Probably the reason is the relaxation of electric field in the specimen with bigger tip ratio. As the 6 specimens were applied AC 5[KV],7.5[KV],10[KV] respectively, tree growth length is far shorter in the specimen with blend ratio 70:30, 50:50 than in pure EVA and pure LLDPE specimen. Conclusively, it is confirmed that specimens of which blend ratio are 70:30 and 50:50 are good in electrical tree retardant characteristics, especially, 70:30 has lower dielectric loss than 50:50 and its mixture ratio is the best.

• 한국전자파학회논문지
• /
• 제20권5호
• /
• pp.471-479
• /
• 2009

본 논문에서는 개선된 가시 트리 구조와 가시면 검색을 위해 효율적인 방법을 적용한 광선 추적법을 제안한다. 비슷한 특성을 갖는 트리의 노드를 재생성하지 않는 개선된 가시 트리 구조를 사용하였으며, 가시면 판별을 위해 묶음 광선(packet ray) 개념 검사점을 비균일하게 분포시키는 방법으로 경로 탐색 성능을 개선하였다. 충돌검사에서 묶음 광선를 사용함으로써 3.3배의 속도 개선을 이루었으며, 비균일 검사점 분포를 통해 1.11배의 성능향상을 이루었다. 본 광선추적법을 적용한 결과의 경우, 경로 손실에서 Rh4S 에러가 1.9 dB 발생하여 높은 정확도를 제공할 수 있음을 보였다.

• 한국멀티미디어학회논문지
• /
• 제16권5호
• /
• pp.637-646
• /
• 2013

본 연구는 다수의 나무로 구성된 실외 지형에 적합하고 다양하고 자연스러운 나무를 모델링하기 위하여 새로운 성장 규칙(약수 함수의 합성 곱 기반)의 모델링 방법을 제안한다. 기본적으로 나무를 구성하는 가지와 잎의 효율적 관리와 자연스러운 가지 증식을 위하여 기존의 성장 볼륨기반 알고리즘을 활용한다. 이 논문의 주요 특징은 각 성장 단계에서 가지와 잎의 성장과 운명을 자연스럽게 표현하는 약수 함수 합성 곱 이론을 도입하는 것이다. 이를 기반으로 일반화된 생성 함수를 갖는 여러 약수 함수와 성장 규칙의 변형을 통해 사용자의 제어를 최소화하여 다양한 나무를 모델링하는 방법을 제안한다. 이 모델링 방법은 가지와 잎을 동시에 고려하는 특징이 있으며, 다수의 나무들로 구성된 실외 지형 구축에 보다 효과적이라는 이점이 있다. 제안한 방법을 통해 자연스럽고 다양한 나무 모델 생성과 이를 활용하여 넓은 자연 지형 구축 가능성과 다수의 나무를 구성하는 과정에서의 효율성을 실험을 통해 증명한다.

• 한국조경학회지
• /
• 제25권2호
• /
• pp.9-19
• /
• 1997

These studies were carried out to investigate seed propagation method and conducted using stem cuttings of Styrax japonicus for using as a woody landscape plant. The results are obtained as follows. After the H\sub2\SO\sub 4\ and GA\sub 3\ treatment to the seeds of Styrax japonicus, three months of warm treatment followed by cold stratification for four months increased seed germination rate. The rooting rate of Styrax japonicus was increased by the treatment with concentrated IBA, especially highest at 7,000ppm. Rooting percentages were highest for cuttings taken on July 15, 1995. Therefore, the most effective method for rooting of Styrax japonicus was treatment with 7,000ppm IBA on July 15 cuttings, which showed rooting rate of over 90%. Half-leaf-remained cuttings were more effective than those with two leaves on rooting of Styrax japonicus. Dipping for 10 seconds in IBA solution resulted in rooting rate of over 70%. The longer the treatment time the worse the rooting.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.172-175
• /
• 2005

The numerical simulation is performed for the acoustic emission and the wave propagation due to fiber breakage in single fiber composite plates by the finite element transient analysis. The acoustic emission and the following wave motions from a fiber breakage under a static loading is simulated to investigate the applicability of the explicit finite element method and the equivalent volume force model as a simulation tool of wave propagation and a modeling technique of an acoustic emission. For such a simple case of the damage event under static loading, various parameters affecting the wave motion are investigated for reliable simulations of the impact damage event. The high velocity and the small wave length of the acoustic emission require a refined analysis with dense distribution of the finite element and a small time step. In order to fulfill the requirement for capturing the exact wave propagation and to cover the 3-D simulation, we utilize the parallel FE transient analysis code and the parallel computing technology.

• 정보처리학회논문지D
• /
• 제10D권4호
• /
• pp.647-654
• /
• 2003

데이터의 중복은 가용성과 시스템의 성능을 향상시키기 위하여 사용한다. 분산 데이터베이스 시스템에서는 데이터베이스의 일관성뿐만 아니라 중복 일판성도 유지해야 한다. 이 논문에서는 부분 중복 환경에서 각 데이터 마다 주사본을 루트로 하여 그 데이터의 사본들을 계층적인 트리로 조직화하고, 이 트리를 이용하여 연산들의 충돌문제를 해결하는 효율적인 알고리즘을 제안한다. 각 데이터의 계층구조화는 갱신이 데이터의 계층구조를 따라 사본이 갖는 사이트에만 전파될 수 있으므로 갱신의 불필요한 전파시간을 제거하여 갱신 전달 시간을 줄일 수 있다. 그리고 제안한 알고리즘은 지연 갱신 전파로 인하여 갱신 전파 도중에 발생할 수 있는 충돌로 인한 비직렬성 문제를 타임스탬프와 보상 트랜잭션을 이용하여 해결한다. 이러한 방식의 연산들의 충돌문제의 해결은 갱신전파 시간을 줄이면서도 일관성 있는 데이터를 제공할 수 있다.

• Nuclear Engineering and Technology
• /
• 제43권3호
• /
• pp.271-278
• /
• 2011

When performing fire PSA in a nuclear power plant, an event mapping method, using an internal event PSA model, is widely used to reduce the resources used by fire PSA model development. Feasible initiating events and component failure events due to fire are identified to transform the fault tree (FT) for an internal event PSA into one for a fire PSA using the event mapping method. A surrogate event or damage term method is used to condition the FT of the internal PSA. The surrogate event or the damage term plays the role of flagging whether the system/component in a fire compartment is damaged or not, depending on the fire being initiated from a specified compartment. These methods usually require explicit states of all compartments to be modeled in a fire area. Fire event scenarios, when using explicit identification, such as surrogate or damage terms, have two problems: (1) there is no consideration of multiple fire propagation beyond a single propagation to an adjacent compartment, and (2) there is no consideration of simultaneous fire propagations in which an initiating fire event is propagated to multiple paths simultaneously. The present paper suggests a fire propagation equation to identify all possible fire event scenarios for an explicitly treated fire event scenario in the fire PSA. Also, a method for separating fire events was developed to make all fire events a set of mutually exclusive events, which can facilitate arithmetic summation in fire risk quantification. A simple example is given to confirm the applicability of the present method for a $2{\times}3$ rectangular fire area. Also, a feasible asymptotic approach is discussed to reduce the computational burden for fire risk quantification.