• Journal of Environmental Science International
• /
• v.25 no.4
• /
• pp.535-542
• /
• 2016

This study was conducted to investigate effects of waterlogging on the growth, physiological responses, and yield of Kimchi cabbage. The growth of Kimchi cabbage with applied optimized air temperature (set to $20^{\circ}C$) was greater than those with high air temperature (set to $30^{\circ}C$) and the growth significantly decreased by severe waterlogging treatment. The net photosynthetic rate of outer leaves on one hour after waterlogging treatment was higher at 72 hours waterlogging treatment in $20^{\circ}C$ and lower at 24 hours of waterlogging treatment in $30^{\circ}C$. The root activity was decreased by the elevation of waterlogging periods in $20^{\circ}C$ treatment and lower by the short of waterlogging periods in $30^{\circ}C$ treatment. The ratio of formality with non-waterlogging treatment was approximately 64% under $20^{\circ}C$ air temperature and that of range was from 16 to 30% under $30^{\circ}C$. The yield under $20^{\circ}C$ showed higher than that under high air temperature. The non-waterlogging treatment in $20^{\circ}C$ had 4,463 kg/10a, which was the greatest among all treatments, while yields of non-waterlogging treatment at $30^{\circ}C$ were significantly low as 1,082 kg/10a. Results suggested that additional drainage work should be needed to overcome waterlogged conditions of open field during heavy rainfall and should be drainage as soon as possible if there are waterlogging.

• Progress in Medical Physics
• /
• v.30 no.4
• /
• pp.104-111
• /
• 2019

Purpose: Online magnetic resonance-guided adaptive radiotherapy (MRgART), an emerging technique, is used to address the change in anatomical structures, such as treatment target region, during the treatment period. However, the electron density map used for dose calculation differs from that for daily treatment, owing to the variation in organ location and, notably, air pockets. In this study, we evaluate the dosimetric effect of electron density override on air pockets during online ART for pancreatic cancer cases. Methods: Five pancreatic cancer patients, who were treated with MRgART at the Seoul National University Hospital, were enrolled in the study. Intensity modulated radiation therapy plans were generated for each patient with 60Co beams on a ViewrayTM system, with a 45 Gy prescription dose for stereotactic body radiation therapy. During the treatment, the electron density map was modified based on the daily MR image. We recalculated the dose distribution on the plan, and the dosimetric parameters were obtained from the dose volume histograms of the planning target volume (PTV) and organs at risk. Results: The average dose difference in the PTV was 0.86Gy, and the observed difference at the maximum dose was up to 2.07 Gy. The variation in air pockets during treatment resulted in an under- or overdose in the PTV. Conclusions: We recommend the re-contouring of the air pockets to deliver an accurate radiation dose to the target in MRgART, even though it is a time-consuming method.

• Journal of Korean Dental Science
• /
• v.7 no.2
• /
• pp.49-57
• /
• 2014

Purpose: To evaluate the effect of different surface treatment methods (yttria-tetragonal zirconia polycrystal [Y-TZP] primers, air-abrasion, and tribochemical surface treatment) on the shear bond strength between (Y-TZP) ceramics and etch-and-rinse non-10-methacryloyloxydecyl dihydrogen phosphate (MDP)-containing resin cements. Materials and Methods: Y-TZP ceramic surfaces were ground flat with 600-grit silicone carbide abrasives paper and then divided into seven groups of ten. They were treated as the following: untreated (control), Monobond Plus (IvoclarVivadent), Z-PRIME Plus (Bisco Inc.), ESPE Sil with CoJet (3M ESPE), air-abrasion, Monobond Plus with air-abrasion, and Z-PRIME Plus with air-abrasion. The surface of Y-TZP specimens was analyzed under a scanning electron microscope (SEM). Non-MDP-containing cements were placed on the surface-treated Y-TZP specimens. After thermocycling, shear bond strength test was performed. Bond strength values were statistically analyzed using one-way analysis of variance and Student-Newman-Keuls multiple comparison test (P<0.05). Result: The Z-PRIME Plus treatment in combination with air-abrasion produced the highest bond strength ($14.94{\pm}1.70MPa$) followed by Monobond Plus combined with air-abrasion ($10.70{\pm}1.71MPa$), air-abrasion ($10.47{\pm}1.60MPa$), ESPE Sil after CoJet treatment ($10.38{\pm}0.87MPa$), Z-PRIME Plus application ($10.00{\pm}1.70MPa$), and then Monobond Plus application ($9.25{\pm}0.86MPa$). The control ($6.70{\pm}1.49MPa$) indicated the lowest results (P<0.05). The SEM results showed different surface morphologies according to surface treatment methods compared with the Y-TZP control. Conclusion: The shear bond strength between the Y-TZP ceramic and the non-MDP-containing resin cement was the greatest when the surface was treated with air-abrasion and MDP-containing Z-PRIME Plus primer.

• Design & Manufacturing
• /
• v.14 no.2
• /
• pp.28-33
• /
• 2020

Recently, as the income level and quality of life have improved, the desire for a pleasant environment has increased, and a deodorization plan is required through thorough prevention and diffusion of odorous substances in waste treatment facilities recognized as hateful facilities, appropriate collection, and selection of the right prevention facilities. In this study, a waste disposal facility was modeled and computerized analysis for odor and ventilation analysis was conducted. Numerical analysis of the waste treatment facility was performed at the size of the actual plant. CATIA V5 R16 for numerical model generation and ANSYS FLUENT V.13 for general purpose flow analysis were used as analysis tools. The average air-age of the internal was 329 seconds, and the air-flow velocity was 0.384m/s. The odor diffusion analysis inside the underground pump room showed congestion-free air circulation through streamline distribution and air-age distribution. This satisfies the ASHRAE criteria. In addition, the results of diffusion analysis of odorous substances such as ammonia, hydrogen sulfide, methyl mercaptan and dimethyl sulfide were all expected to satisfy the regulatory standards. Particularly in the case of the waste loading area, the air-flow velocity was 0.297m/s, and the result of meeting the regulatory standards with 0.167ppm of ammonia, 0.00548ppm of hydrogen sulfide, 0.003ppm of methyl mercaptan, and 0.003ppm of dimethyl sulfide was found.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.3
• /
• pp.213-218
• /
• 2002

Total nitrogen is a major pollutant which mostly causes eutrophication and red tide. Wastewater effluent from printing of cotton-viscose rayon containing high concentrations of total nitrogen can not be effectively treated with a typical biological treatment process. This paper provides a new treatment process and experimental results for the removal of high strength nitrogen from dyeing wastewater. The optimum conditions of air stripping for the removal of total nitrogen include around pH 12, temperature $60^{\circ}C$ with 60 minutes of stripping time. In case of a filtration-air stripping process, an initial level ($500mg/{\ell}$) of total nitrogen was significantly reduced to below $60mg/{\ell}$. Deconite was synthesised for further decomposition of organic nitrogen. Thus, a filtration-decomposition-air stripping process was possibly achieved, by which a high level ($900mg/{\ell}$) of total nitrogen was effectively removed to below $60mg/{\ell}$ P. Finally, a continuous new process for the removal of total nitrogen is proposed and confirmed, based on batch experimental results, and its process validity is further discussed throughout.

• Biomolecules & Therapeutics
• /
• v.6 no.1
• /
• pp.9-13
• /
• 1998

ln an attempt to define the effects of hyperbaric oxygen treatment on the lipid peroxidation and oxygen See radical reactions in rats exposed to carbon monoxide, we studied malondialdehyde(MDA) level and activities of catalase and superoxide dismutase in the heart of the rats exposed to carbon monoxide. Male Sprague-Dawley albino rats weighing 240 to 260gm were used. Experimental groups consist of Control group (=breathing with air), HBO group(=exposed to hyperbaric oxygen(HBO, 3ATA, 100%) after air breath), CO group(=exposed to CO(3,970 ppm) after air breath), CO-Air group(=exposed to CO after air breath followed by air breath) and CO-HBO group(=exposed to CO after ai. breath followed HBO treatment). The CO group showed significantly higher MDA level, catalase activity and SOD activity as compared to that of control group. The CO-HBO group showed significantly lower MDA level as compared to that of CO group, and did not show significantly lower catalase activity and SOD activity as compared to that of CO group. These results suggest that the excessive oxygen free radicals is an important determinant in pathogenesis of Co-induced cardiotoxicity and HBO inhibits the lipid peroxidation caused by excessive oxygen free radicals in the heart of the rats exposed to carbon monoxide.

• Asian Journal of Atmospheric Environment
• /
• v.5 no.3
• /
• pp.181-188
• /
• 2011

Photocatalysis is a photochemical catalytic reaction which is a highly promising tool for the environmental cleanup process. It is very effective in treatment of environmental pollutants by its unique redox property. It has wide applications in the treatment of atmospheric pollutants (e.g., nitrogen dioxide, trichloroethylene, volatile organics, hydrogen sulfide, benzene, etc) through oxidative removal and by disinfection (aeromicro flora). In this research, the fundamental aspects of photocatalysis are described with respect to the composition of catalysts, experimental conditions (e.g., temperature, duration, etc), and interfering factors (e.g., catalyst deactivation).

• Journal of Korean Society of Water and Wastewater
• /
• v.10 no.2
• /
• pp.80-87
• /
• 1996

Treatment efficiencies of water quality parameters such as $KMnO_4$ Demand, $UV_{254}$, Turbidity, and LAS(Linear Alkyl Sulfonate) were compared between DAF(Dissolved Air Flotation) and CGS(Conventional Gravitational Sedimentation). The experimental results showed that DAF is much more efficient in treatment of water quality parameters than CGS. The optimum pH was about 7, and optimum alum($Al_2(SO_4)_3$) dose was about 30 ppm for DAF treatment. Economic aspects were also analyzed for bath systems. Even though production cost per ton of drinking water is slightly higher in DAF than in CGS, it turned out that construction cost and land value of CGS far surpass the production cost. DAF system is superior in removal efficiency of impurities and in production cost as a whole to CGS system.

• Korean Journal of Medicinal Crop Science
• /
• v.26 no.4
• /
• pp.291-295
• /
• 2018

Background: The use of Rehmannia glutinosa of the family Scrophulariaceae, in traditional medicine is well known. This study was conducted to elucidate the effect of air curing of the seed rhizome of R. glutinosa on its storability and yield. Methods and Results: The root of the R. glutinosa cultivar (Dagang) was harvested in at the end of November. The seed rhizomes were air cured for one to seven days. They were subsequently wrapped with newspaper and further stored in a plastic container at $1^{\circ}C$. It was observed that the weight loss and decay rates were significantly lower in the air cured seeds than in the untreated ones. Moreover, the decay rate of the control was approximately 50%, 120 days after storage. However. the decay rate of all the air cured treatment groups was less than 1%. Additionally, air curing led to an increase in the germination rate of the seeds and the root yield when compared with the untreated groups. Taken together, the ideal treatment period for air curing was found to be 3 days. Under these conditions, the germination rate and yield were 88.7% and 2,185 ㎏/10a, respectively. Conclusions: This study successfully demonstrated that the air curing of seed rhizomes can lead to a considerable increase in the storability and yield of R. glutinosa.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.2
• /
• pp.101-111
• /
• 2014

In this study the effect of heartwood-coating (HCO), vapor-dam (VD), bark-remaining (BR) and bark-remaining-coating (BRC) treatments on the air circulating oven-drying characteristics of Japanese larch hollowed round-post was evaluated. The drying times of the hollowed round-posts for control, VD, HCO and BR specimens were 72, 168, 204 and 240 hours, respectively, from the initial MC to about 8% MC, which was recommended as the indoor in-use MC. The temperature in the hole of the VD specimen was lower than that of wood and the difference between air temperature in the hole and wood temperature became large during drying period. The vapor pressure of air in the hole was higher than that of inside wood for all specimens except VD specimen. The surface checks on all specimens were observed in increasing order of BR, BRC, UC, HCO and VD specimens.