• 한국생산제조학회지
• /
• 제7권2호
• /
• pp.108-114
• /
• 1998

Development on the mechanical properties of steel sheet for the automobile body panel is very important in the BAF(Batch annealing furnace) annealing process. Because of the heat treatment method in the BAF, mechanical properties was decided on the heat treatment method of the coil. So, we tested on the development of mechanical properties according to heat treatment method at the annealing furnace using the Ax(H$_2$75%, $N_2$25%) atmospheric gas and the HNx(H$_2$4%, $N_2$96%) atmospheric gas. As a result of several investigations. We confirmed the following characteristics ; mechanical properties was changed under the influence of the annealing cycle, the heat treatment method and the atmospheric gas. And, elongation in the HNx BAF was better than the Ax BAF. Finally, most important thing in the BAF is using of proper annealing cycle in order to get a good quality.

• Fibers and Polymers
• /
• 제7권3호
• /
• pp.241-244
• /
• 2006

In this paper, the effect of cellulase treatment was evaluated by means of phenol-sulphuric acid method. This method was performed by determining sugar liberation in the treatment bath with the amount expressed in glucose equivalent. As compared with conventional method, the measurement of amount of sugar liberated gave a more reliable and accurate result than the weight loss method. It was found that although the weight loss of cellulose became negligible when the treatment was done under agitation-free condition, the amount of sugar liberated was still readily measurable.

• 한국정밀공학회지
• /
• 제15권7호
• /
• pp.69-77
• /
• 1998

Development on the mechanical properties of steel sheet for the automobile body panel is very important in the BAF(Batch annealing furnace) annealing process. Because of the heat treatment method in the BAF, mechanical properties were decided on the heat treatment method of the coil. So, we tested on the development of mechanical properties according to heat treatment method at the annealing furnace using the In atmospheric gas($H_2$ : 75%, $N_2$ : 25%) and the HNx atmospheric gas($H_2$ : 5%, $N_2$ : 95%) We confirmed the following characteristics, mechanical properties were changed under the influence of the annealing cycle and the atmospheric gas. And, we have some result according to heat treatment method. Elongation of the mechanical properties in the HNx BAF is higher than the Ax BAF. But tensile strength and hardness is higher than the HNx BAF.

• International Journal of Advanced Culture Technology
• /
• 제10권4호
• /
• pp.361-368
• /
• 2022

This study seeks to determine the research trend of late adolescents by utilizing big data. Also, seek for research trends related to activity participation, treatment, and mediation to provide academic implications. For this process, gathered 1.000 academic papers and used TF-IDF analysis method, and the topic modeling based on co-occurrence word network analysis method LDA (Latent Dirichlet Allocation) to analyze. In conclusion this study conducted analysis of activity participation, treatment, and mediation of late adolescents by TF-IDF analysis method, co-occurrence word network analysis method, and topic modeling analysis based on LDA(Latent Dirichlet Allocation). The results were proposed through visualization, and carries significance as this study analyzed activity, treatment, mediation factors of late adolescents, and provides new analysis methods to figure out the basic materials of activity participation trends, treatment, and mediation of late adolescents.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2012년 추계학술대회
• /
• pp.121-131
• /
• 2012

This study is an analysis about BOD, COD, SS, T-N, T-P of 4Stage-BNR, MLE + CS(Coagulating Sedimentation), Bio-SAC BNR method of construction for 3 largest sewage treatment plants among 12 sewage treatment plants in Incheon. The purpose of this study is improving the operational effectiveness for Incheon sewage treatment plant by introducing the optimized method for quality of the discharged water.

• 한국연초학회지
• /
• 제11권1호
• /
• pp.79-85
• /
• 1989

For the Purpose of this study, were researched the optimum condition preconditioning condition of orient tobacco leaves . The loss of 3-methyl pentanoic acid (3-MP) component of BASMA leaves in the treatment process amount to about 60% , but the loss of 3-MP At the optimum conditions of BASMA CTC treatment, the temperature was 45-$65^{\circ}C$ and the treatment time 25-35 minutes. And further, the physical properties of BASMA after CTC treatment was remarkably similar to the control's. Since VTC minimized the loss, it is suggested that CTC method should be changed by VTC method.

• 기술발표회
• /
• 통권2006호
• /
• pp.235-247
• /
• 2006

A ground treatment work for Hongkong container terminal yard is reported as a case study of site formation work with full dredging and replacement method. Ground treatment work adopting surcharge and deep compaction (vibroflotation) were applied to improve the sand creep potential. The sand creep parameter of 0 25% was assumed in design stage and improved up to 0.05% and 0.02% after surcharge and deep compaction respectively

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.1025-1030
• /
• 2000

Recently, surface-treatment agent was developed to restore performance of the deteriorated concrete and inhibiting corrosion of the reinforcing-bar. The performance of surface-treatment agent was verified and this agent has been broadly in America and European countries. However, this type agent has not been used broadly in Korea because performance of the agent isn't verify by a proper test method yet. In this study, we suggested our own test procedures and methods through extensive laboratory tests to verify the performance of concrete after applying the surface-treatment agent.

• Environmental Engineering Research
• /
• 제11권2호
• /
• pp.63-76
• /
• 2006

Multivariate analysis and batch monitoring on a pilot-scale sequencing batch reactor (SBR) are described for integrated wastewater treatment management system, where a batchwise multiway independent component analysis method (MICA) are used to extract meaningful hidden information from non-Gaussian wastewater treatment data. Three-way batch data of SBR are unfolded batch-wisely, and then a non-Gaussian multivariate monitoring method is used to capture the non-Gaussian characteristics of normal batches in biological wastewater treatment plant. It is successfully applied to an 80L SBR for biological wastewater treatment, which is characterized by a variety of error sources with non-Gaussian characteristics. The batchwise multivariate monitoring results of a pilot-scale SBR for integrated wastewater treatment management system showed more powerful monitoring performance on a WWTP application than the conventional method since it can extract non-Gaussian source signals which are independent and cross-correlation of variables.

• 한국콘텐츠학회논문지
• /
• 제14권9호
• /
• pp.556-566
• /
• 2014

목적 : 경혈, 침구 온톨로지의 연계율을 높이기 위한 연구를 시행하였다. 방법 : 혈성(효능) 용어와 치법 용어를 최소 의미 단위로 분해하여 상호 연계하였다. 결과 : 혈성(효능)과 치법의 연계가 증가함에 따라 경혈, 침구 온톨로지 간 연계성이 증가하였으며, 확장 연계되는 프로퍼티의 수와 프로퍼티 간 노드의 수도 증가하였다. 결론 : 혈성(효능) 용어와 치법 용어의 최소 의미 단위로의 연계를 통해 온톨로지의 연계율이 개선되고 이에 따라 온톨로지의 활용성이 제고될 수 있음을 알 수 있었다.