• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.4
• /
• pp.343-350
• /
• 2003

Using Bi$_2$Sr$_2$Ca$_2$.$_2$Cu$_3$ $O_{x}$ powders prepared by solid state reaction and spray drying method, the nucleation and growth behaviors of superconducting and second phases were investigated during isothermal heat treatment. When the spray drying power was used in contrast with solid state reaction powder, Bi$_2$Sr$_2$Ca$_2$.$_2$Cu$_3$ $O_{x}$ (2223) phase could be formed at the relatively shot time and second phases were much bigger. Quantitative analysis showed that as the heat treatment time increased, more Bi$_2$Sr$_2$Ca$_2$.$_2$Cu$_3$ $O_{x}$ (2212) changed to 2223 and the major second phase was changed from (Sr,Ca)$_{14}$Cu$_{24}$ $O_{x}$(14:24) to (Sr,Ca)$_2$Cu$_1$ $O_{x}$ (2:l). The superconducting phase formed at the relatively short time 14:24 phase. Following the Bi-free phase of 14:24 Phase, but long time was needed in places far from the 14:24 phase. Following the formation of the 2212 phase near the 14:24 phase, the 2223 phase nucleated preferentially at the interface between the 2212 and 14:24 phases. The preferential nuclcation of 2223 was explained by its structural similarity and low Interfacial energy with both the Bi-free and 2212 Phases.12 Phases.

• The Journal of Internal Korean Medicine
• /
• v.33 no.1
• /
• pp.14-25
• /
• 2012

Objectives : To observe physiological changes during clinical acupuncture treatment. Methods : We recruited 40 healthy volunteers who had experienced an acupuncture treatment at least once within the past three years. The experimental group was divided into four groups according to the needling site and frequency of electrical stimulation. Sites consisted of abdomen and legs. Frequencies consisted of 100 Hz and 2 Hz. The procedures of experimental treatment consisted of seven phases, Resting I phase (Resting I), Needle insertion phase (Insertion), Maintenance of needle insertion I phase (Maintain I), Electrical stimulation phase (ES), Maintenance of needle insertion II phase (Maintain II), Needle removal phase (Removal) and Resting II phase (Resting II). We measured the surface electromygraphy (SEMG) through an electrode on the frontalis muscle during all phases consecutively. Results : When SEMGs of all seven phases were analyzed, they significantly increased or decreased according to phases. SEMGs of Insertion, Maintain I, ES and Maintain II phase significantly increased more than RestingI in abdomen and legs groups. SEMGs of the abdomen group were measured as being $4.78{\pm}0.74{\mu}V$ on Resting I, $16.48{\pm}3.97{\mu}V$ on Insertion, $46.31{\pm}10.56{\mu}V$ on Maintain I, $45.88{\pm}9.72{\mu}V$ on ES, $45.56{\pm}9.69{\mu}V$ on Maintain II, $18.76{\pm}3.05{\mu}V$ on Removal, and $3.75{\pm}0.65{\mu}V$ on Resting II. SEMGs of the legs group were measured as being $3.34{\pm}0.35{\mu}V$ on Resting I, $12.11{\pm}1.76{\mu}V$ on Insertion, $36.74{\pm}6.99{\mu}V$ on Maintain I, $33.57{\pm}6.30{\mu}V$ on ES, $32.66{\pm}6.03{\mu}V$ on Maintain II, $14.08{\pm}2.15{\mu}V$ on Removal, and $2.88{\pm}0.32{\mu}V$ on Resting II. Conclusions : SEMG changed differently according to processes of acupuncture. Electrical stimulation showed different change of SEMG. Thus, acupuncture treatment may change the status of the autonomic nervous system.

• Journal of the Korean Society for Heat Treatment
• /
• v.26 no.3
• /
• pp.105-112
• /
• 2013

The microstructural changes of Fe-20Mn-12Cr-1Cu alloy have been studied during high temperature gas nitriding (HTGN) at the range of $1000^{\circ}C{\sim}1150^{\circ}C$ in an atmosphere of nitrogen gas. The mixed microstructure of austenite and ${\varepsilon}$-martensite of as-received alloy was changed to austenite single phase after HTGN treatment at the nitrogen-permeated surface layer, however the interior region that was not affected nitrogen permeation remained the structure of austenite and ${\varepsilon}$-martensite. With raising the HTGN treatment temperature, the concentration and permeation depth of nitrogen, which is known as the austenite stabilizing element, were increased. Accordingly, the depth of austenite single phase region was increased. The outmost surface of HTGN treated alloy at $1000^{\circ}C$ appeared Cr nitride. And this was in good agreement with the thermodynamically calculated phase diagram. The grain growth was delayed after HTGN treatment temperature ranges of $1000^{\circ}C{\sim}1100^{\circ}C$ due to the grain boundary precipitates. For the HTGN treatment temperature of $1150^{\circ}C$, the fine grain region was shown at the near surface due to the grain boundary precipitates, however, owing to the depletion of grain boundary precipitates, coarse grain was appeared at the depth far from the surface. This depletion may come from the strong affinity between nitrogen and substitutional element of Al and Ti leading the diffusion of these elements from interior to surface. Because of the nitrogen dissolution at the nitrogen-permeated surface layer by HTGN treatment, the surface hardness was increased above 150 Hv compared to the interior region that was consisted with the mixed microstructure of austenite and ${\varepsilon}$-martensite.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.624-627
• /
• 2001

Two kinds of Nd$_{1+x}$Ba$_{2-x}$Cu$_3$O$_{7-{\delta}}$, the sintering samples and zone melting samples, were heat treated under pure Ar at 95$0^{\circ}C$. The substitution of Nd ion for Ba ion in the Nd$_{1+x}$Ba$_{2-x}$Cu$_3$O$_{7-{\delta}}$ before and after the heat treatment were investigated by XRD. In order to know the effects of the heat treatment, the T$_{c}$ and J$_{c}$ of samples with the heat treatment and those without the heat treatment by Ar were comparatively studied. The results show that the substitution of Nd for Ba decreased, T$_{c}$, and J$_{c}$ increased after the treatment under Ar at 95$0^{\circ}C$. The Nd$_{1+x}$Ba$_{2-x}$Cu$_3$O$_{7-{\delta}}$ samples were oxygenated under pure oxygen at 30$0^{\circ}C$. From the XRD pattern it was found that the sample with x< 0.4 could transfer from tetragonal phase to orthorhombic phase after the oxygenation, but the sample with x>0.4 could not make the phase transition even after a long time oxygenation.ion even after a long time oxygenation.ation.n.ation.ation.

• Journal of Korea Foundry Society
• /
• v.36 no.5
• /
• pp.167-173
• /
• 2016

The effect of various types of heat-treatment on the mechanical properties of cast Alloy 718 has been investigated. Cast Alloy 718 bars were subjected to 'standard heat-treatment'_(SHT), 'HIP (Hot Isostatic Pressing) heat-treatment'_(HHT), and 'HIP-simulated heat-treatment'_(HS). In the absence of long time high temperature heat-treatment, a small amount of Laves phase remained in the 'SHT' specimen, and needle shaped ${\delta}$ precipitated in the vicinity of the Laves phase. Due to the formation of the Laves and ${\delta}$ phases in the 'SHT' specimen, it exhibited lower tensile properties than those of the others_specimens. On the other hand, the Laves phase was completely dissolved into the matrix after 'HHT' and 'HS' treatments. It is known that isostatic pressure reduces the self-diffusion coefficient, because of the lower self-diffusivity under HIP conditions in the interdendritic region, Nb segregation and the high amount of ${\gamma}^{{\prime}{\prime}}$ precipitation that occurs. Due to the higher fraction of coarse ${\gamma}^{{\prime}{\prime}}$ phases, the 'HHT' treated Alloy 718 showed excellent tensile strength.

• Korean Journal of Medicinal Crop Science
• /
• v.10 no.4
• /
• pp.288-293
• /
• 2002

Allergen-removed-extract was produced from Rush verniciflua by two phase methods. Phase one was high temperature treatment of Rush verniciflua tree to get allergen-removed-extract. Phase two was extraction of solution from phase one product using water or organic solvents. The solutions from above method show high antioxidant activity, anticancer activity, and improvement in lung function, but did not contain urushiol family compounds.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2002.11a
• /
• pp.59-62
• /
• 2002

Recently, advanced system for water and wastewater treatment is introduced and operated because of water pollution and etc. One of this System makes use of O3(Ozone) for water and wastewater treatment. In airtight concrete structure, waterproofing phase as well as water are affected by strong oxidative O3 in the long-term. For this reason, material stability against O3 is examined. Consequently, the purpose of this study is to find out material stability an object of epoxy resin by way of accelerated O3 testing.

• Journal of Power System Engineering
• /
• v.15 no.2
• /
• pp.49-54
• /
• 2011

Effect of tempering treatment on the mechanical properties of 12Cr heat resistant steel with ferrite phase was investigate in this study. As time and temperature of tempering treatment were increase, C and Cr contents in matrix structure were decreased. Due to increase of the amount of Cr26C6 type carbides. It was confirmed in mechanical properties experimental that tensile strength and hardness were decreased, while elongation and impact value were, increased with increasing the time and temperature.

• Journal of Korea Foundry Society
• /
• v.11 no.5
• /
• pp.406-413
• /
• 1991

Ductile cast iron(DCI) with a multi-phase(ferrite-bainite-martensite) structures was produced by various special heat treatment. Intercritical heat treatment(I. C.), intermediate heat treatment(I. M.) and step quenching(S. Q.) were used to strengthen and toughen the fracture initiation sites such as graphite-marix interfaces and eutectic cell boundaries in DCI. The purpose of this study was to investigate of DCI by the special heat treatment. (I. C., I. M., and S. Q.) At a result, bainite nucleation rate at higher temperature was higher than that of at lower temperature, and shapes of bainite and martensite became bar /spheroidal type with increase of isothermal transformation time.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.65-67
• /
• 2003

The critical current of Bi-2223/Ag HTS wire could be improved by the second phase modification pre-treatment (SPMT). On the other hand, the pre-treatment conditions are possible to affect to the degradation of silver alloy sheath, such as brittleness. Chlorine was detected at the outer sheath of wire by Auger observation, we also have tried to search new pre-treatment conditions that do not affect the degradation of silver sheath but, improve the critical current of the wire.