• Journal of Biosystems Engineering
• /
• v.24 no.3
• /
• pp.183-194
• /
• 1999

Using the dynamic model and simulation program TDA developed in the previous paper, effects of design parameters of an agricultural tractor-trailer system on its vertical seat vibrations were investigated. The tractor-trailer system was excited by traversing over a half-sine bump. The excitation frequencies were determined by traveling velocity of the tractor and a half-sine bump selected appropriately. TDA predicted the autospectra of the vertical seat accelerations with different values of design parameters and compared them to analyze their effects. The design parameters included positions of engine, cab, and seat mountings as well as their dynamic properties. The results of this study suggested guidelines with which an improved structure of tractor may be developed in the early stage of design for a better ride quality.

• Journal of Biosystems Engineering
• /
• v.14 no.2
• /
• pp.85-93
• /
• 1989

This study was intended to develop the system which controls header height of combine automatically by means of sensing the difference between the header and the ground surface. A micro-computer was used for the controller. The sensing unit designed for the study was composed of potentiometer, oscillating link, and gage wheel. An electric-hydraulic circuit was driven by microcomputer to control header height of combine. Performance of the control system was tested by computer simulation, stationary operation of header, and traveling on the simulated ground.

• The Journal of Korea Robotics Society
• /
• v.2 no.1
• /
• pp.93-102
• /
• 2007

It is essential to estimating positions of multiple robots in order to perform cooperative task in common workspace. Accordingly, we propose a new approach of cooperative localization for multiple robots utilizing correlation among GPS errors in common workspace. Assuming that GPS data of individual robot are correlated strongly as the distance among robots are close, it is confirmed that the proposed method provides improved localization accuracy. In addition, we define two operational parameters to apply proposed method in multiple robot system. With mentioned two parameters, we present a practical solution to accumulated position error in traveling long distance.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.437-439
• /
• 2000

This paper describes a fault location technique using wavelets in underground transmission cable system Estimation of fault location is performed using data sampled at two ends of underground system. In the case of 50% fault of total underground transmission line, fault location is calculated using sampled single-end data in underground transmission line. Traveling wave is utilized in capturing the travel time of the transients along the monitored lines between the relay and the fault point. This travel time information is provided by the wavelet. Simulation was performed using EMTP. ATP Draw and MATLAB. The results of fault location shown in this paper will be evaluated as an effective suggestion for fault to location in real underground transmission line.

• Journal of the Korean Society for Railway
• /
• v.10 no.2 s.39
• /
• pp.153-160
• /
• 2007

To start or stop the train safely within the limited traveling distance, it is necessary to guarantee the proper traction or braking force. Presently, most trains are run by the electrical power and have adopted a combined electrical and mechanical(friction) braking system. In order to design a good traction or a brake system, it is essential for designers to predict the traction or brake performance. In this paper, the traction/coasting/braking performances analysis program has been developed and verified by comparing the simulation results with on-line test results of the Korean high speed train(HSR-350); Both results match very well. Consequently, the designers can predict the traction/coasting/braking performances of trains by using the proposed program under various operating conditions.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.05a
• /
• pp.1592-1595
• /
• 2006

본 연구는 시뮬레이션방법을 이용한 가전회사 사내운송시스템 계획 및 적정 운송을 위한 사내운송시스템 시뮬레이션모델 개발에 관한 연구이다. 사내에서 운행되는 운송시스템 분석 및 적정운송시스템을 구축하기 위하여 기간내 차량운송방식, 배차계획 및 운송경로 등의 자료를 통한 사내물류에서 발생되는 예상정체구간 및 운송시스템의 성능을 산정하여 사내운송시 발생되는 물류비 개선을 주요 목표로 한다. 이를 위해 본 연구에서는 AutoMod 시뮬레이터를 사용하여 사내운송시스템을 구성하여 분석한다. 본 연구에서 개발한 사내운송시스템 시뮬레이션 모델은 사내운송시스템의 문제점 분석 및 개선 등을 통한 사내물류 정체률 감소 및 적정 운영대안을 제시함으로써 운송시스템의 효율성을 증대시켜 사내물류흐름 개선 및 물류비의 절감 효과를 얻을 수 있다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1513-1520
• /
• 2000

Complex modal testing method for rotating disks with support motion is introduced which handles the pairs of two point excitation and responses of the disk as complex input and output, respectively. This method utilizes the directivity information and the separation over the rotational speed of forward and backward traveling wave modes or bending coupled modes in the directional frequency response functions(dFRFs). This method synthesizes the normal/reverse dFRFs and complex wave dFRF, which were originally applied to rotating shaft and rotating disk, respectively, and is applied to complex system with dynamically coupled rotating disks and shaft. Experiments with a commercial hard disk drive spindle system demonstrate the validity of this method.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.5
• /
• pp.549-556
• /
• 2009

One of the basic technology for implementing the autonomy of UGV(Unmanned Ground Vehicle) is a path planning algorithm using obstacle and raw terrain information which are gathered from perception sensors such as stereo camera and laser scanner. In this paper, we propose a generation method of DVGM(Directional Velocity Grid Map) which have traverse speed of UGV for the five heading directions except the rear one. The fuzzy system is designed to generate a resonable traveling speed for DVGM from current patch to the next one by using terrain slope, roughness and obstacle information extracted from raw world model data. A simulation is conducted with world model data sampled from real terrain so as to verify the performance of proposed fuzzy inference system.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.3
• /
• pp.487-492
• /
• 2012

In this study we researched a spotlight in LED lighting. Ordinary LED spotlight was manufactured with characterized property of traveling straightness of LED light source, but multiple use of shell type LED, a yellow band has formed caused by light source interference between the LED. Also, there was a high miscellaneous light efficiency with losing light source homogeneity and efficiency due to light source control uneasiness. The study uses aspheric reflector and aspheric lens, so we can control the light source of LED spotlight with effectively and we reached surface light source by using COB/COM for LED module. Furthermore it can change its use by a reduced scale of light system. It has been designed to make its various application from low power consumption of bicycle lamp, up to high power consumption of automobile lamps and lighthouse.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2010.07a
• /
• pp.103-107
• /
• 2010

게임이나 네비게이션 시스템, 관광경로 설계에 있어서 경로찾기는 매우 중요한 부분 중의 하나이다. 일반적으로 TSP(Traveling Salesman Problem), RPP(Rural Postman Problem), CPP(Chinese Postman Problem)와 같은 경로찾기 문제들은 일반적인 알고리즘으로 최적해를 구할 수 없다. 문제크기가 커질수록 해집합이 폭발적으로 커짐으로써 전체 해집합을 탐색하는데 많은 비용이 든다. 따라서, 이러한 문제들은 유전알고리즘이나 Simulated Annealing과 같은 휴리스틱 알고리즘을 이용하여 근사최적 경로를 찾는다. 본 논문에서는 이와 같은 경로찾기 문제의 근사 최적해를 구하기 위한 시뮬레이션 시스템을 설계하고 구현하였다. 본 연구에서 구현한 시뮬레이션 시스템에는 유전알고리즘 엔진(GA 엔진)과 사용자 인터페이스를 제공한다. 사용자 인터페이스는 유전알고리즘에 사용될 파라미터를 설정하는 부분이며, GA 엔진은 유전알고리즘의 연산자들을 제공하는 부분이다. 본 논문에서 구현한 시뮬레이션 시스템은 게임과 같은 경로찾기 등에 활용될 수 있다.