• Journal of Korea Port Economic Association
• /
• v.36 no.3
• /
• pp.1-20
• /
• 2020

Coastal ferry routes are very important because they connect the mainland to islands, offer transportation for islanders, and bring tourism to islands. In particular, the recent increase in national income, prevalence of a culture that emphasizes work-life balance, and introduction of the five-day workweek have stoked interest in travel as a leisure pursuit, and demand for tourism from Korean people in islands has increased. As the number of passengers using coastal passenger terminals increases due to changes in the coastal tourism environment, the importance and need for coastal passenger terminal facilities and services is growing. Under these circumstances, it is necessary for the management organizations of coastal passenger terminals to manage and efficiently operate the terminals in such a way that budgets can be reasonably implemented and the convenience of passengers using the terminals is enhanced. This study primarily analyzed the management efficiency of coastal passenger terminals in terms of profitability and public interest using data envelopment analysis. The eight passenger terminals achieved low management efficiency in terms of profitability. These terminals should improve profitability by increasing income from terminal office rental and ancillary businesses and revenue from terminal fees by boosting island tourism and expanding overseas passenger transportation. The eight terminals with low management efficiency for public interest should increase the number of passengers by promoting island tourism, developing tour packages to Japan and China's coastal areas, developing new routes, and introducing super-high-speed ships.

• Journal of Korean Society of Transportation
• /
• v.22 no.3 s.74
• /
• pp.145-157
• /
• 2004

The cycle length design model of the Korean traffic responsive signal control systems is devised to vary a cycle length as a response to changes in traffic demand in real time by utilizing parameters specified by a system operator and such field information as degrees of saturation of through phases. Since no explicit guideline is provided to a system operator, the system tends to include ambiguity in terms of the system optimization. In addition, the cycle lengths produced by the existing model have yet been verified if they are comparable to the ones minimizing delay. This paper presents the studies conducted (1) to find shortcomings embedded in the existing model by comparing the cycle lengths produced by the model against the ones minimizing delay and (2) to propose a new direction to design a cycle length minimizing delay and excluding such operator oriented parameters. It was found from the study that the cycle lengths from the existing model fail to minimize delay and promote intersection operational conditions to be unsatisfied when traffic volume is low, due to the feature of the changed target operational volume-to-capacity ratio embedded in the model. The 64 different neural network based cycle length design models were developed based on simulation data surrogating field data. The CORSIM optimal cycle lengths minimizing delay were found through the COST software developed for the study. COST searches for the CORSIM optimal cycle length minimizing delay with a heuristic searching method, a hybrid genetic algorithm. Among 64 models, the best one producing cycle lengths close enough to the optimal was selected through statistical tests. It was found from the verification test that the best model designs a cycle length as similar pattern to the ones minimizing delay. The cycle lengths from the proposed model are comparable to the ones from TRANSYT-7F.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.5
• /
• pp.761-778
• /
• 2017

The need of the underground space for the infrastructures in urban area is increasing, and especially the demand for shallow tunnels increased drastically. It is very important that the shallow tunnel in the urban area should fulfill not only its own safety conditions but also the safety condition for the adjacent structures and the surrounding sub-structure. Most of the studies on the behavior of shallow tunnels concentrated only on their behaviors due to the local deformation of the tunnel, such as tunnel crown or tunnel sidewall. However, few studies have been performed for the behavior of the shallow tunnel due to the deformation of the entire tunnel. Therefore, in this study the behavior of the surrounding ground and the stability caused by deformation of the whole tunnel were studied. For that purpose, model tests were performed for the various ground surface slopes and the cover depth of the tunnel. The model tunnel (width 300 mm, height 200 mm) could be simulationally deformed in the vertical and horizontal direction. The model ground was built by using carbon rods of three types (4 mm, 6 mm, 8 mm), in various surface slopes and cover depth of the tunnel. The subsidence of ground surface, the load on the tunnel crown and the sidewall, and the transferred load near tunnel were measured. As results, the ground surface subsided above the tunnel, and its amount decreased as the distance from the tunnel increased. The influence of a tunnel ceased in a certain distance from the tunnel. At the inclined ground surface, the wider subsidence has been occurred. The loads on the crown and the sidewall were clearly visible, but there was no effect of the surface slope at a certain depth. The load transfer on the adjacent ground was larger when the cover depth (on the horizontal surface) was lager. The higher the level (on the inclined surface), the wider and smaller it appeared. On the shallow tunnel under inclined surface, the transfer of the ambient load on the tunnel sidewall (low side) was clearly visible.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.93-100
• /
• 2010

Trip generation is the first step in the conventional four-step model and has great effects on overall demand forecasting, so accuracy really matters at this stage. A linear regression model is widely used as a current trip generation model for such plans as urban transportation and SOC facilities, assuming that the relationship between each socio-economic index and trip generation stays linear. But when rapid urban development or an urban planning structure has changed, socio-economic index data for trip estimation may be lacking to bring many errors in estimated trip. Hence, instead of assuming that a socio-economic index widely used for a general purpose, this study aims to develop a new trip generation model by type based on the market separation for the variables to reflect the characteristics of various zones. The study considered the various characteristics (land use, socio-economic) of zones to enhance the forecasting accuracy of a trip generation model, the first-step in forecasting transportation demands. For a market separation methodology to improve forecasting accuracy, data mining (CART) on the basis of trip generation was used along with a regression analysis. Findings of the study indicated as follows : First, the analysis of zone characteristics using the CART analysis showed that trip production was under the influence of socio-economic factors (men-women relative proportion, age group (22 to 29)), while trip attraction was affected by land use factors (the relative proportion of business facilities) and the socio-economic factor (the relative proportion of third industry workers). Second, model development by type showed as a result that trip generation coefficients revealed 0.977 to 0.987 (trip/person) for "production" 0.692 to 3.256 (trip/person) for "attraction", which brought the necessity for type classifications. Third, a measured verification was conducted, where "production" and "attraction" showed a higher suitability than the existing model. The trip generation model by type developed in this study, therefore, turned out to be superior to the existing one.

• Environmental and Resource Economics Review
• /
• v.14 no.1
• /
• pp.167-199
• /
• 2005

The following policy implications can be drawn from this study: 1) The Air Pollution Emission Amount Report published by the Ministry of Environment since 1991 classifies industries into 4 sectors, i. e., heating, manufacturing, transportation and power generation. Currently, the usability of report is very low and extra efforts should be given to refine the current statistics and to improve the industrial classification. 2) Big pollution industries are as follows - s7, s17 and s20. The current air pollution control policy for these sectors compared to other sectors are found to be inefficient. This finding should be noted in the implementation of future air pollution policy. 3) s10 and s17 are found to be a big polluting industrial sector and its pollution reduction effect is also significant. 4) The effect of emission coefficient (${\Delta}f$) has the biggest impact on the reduction of emission amount change and the effect of economic growth coefficient (${\Delta}y$) has the biggest impact on the increase of emission volume. The effect of production technology factor (${\Delta}D$) and the effect of the change of the final demand structure (${\Delta}u$) are insignificant in terms of the change of emission volume. 5) Further studies on emission estimation techniques on each industry sector and the economic analysis are required to promote effective enforcement of the total volume control system of air pollutants, the differential management of pollution causing industrial sectors and the integration of environment and economy. 6) Korea's economic growth in 1990 is not pollution-driven in terms of the Barry Commoner's hypothesis, even though the overall industrial structure and the demand structure are not environmentally friendly. It indicates that environmental policies for the improvement of air quality depend mainly on the government initiatives and systematic national level consideration of industrial structures and the development of green technologies are not fully incorporated.

• KDI Journal of Economic Policy
• /
• v.30 no.2
• /
• pp.129-155
• /
• 2008

The rate of antibiotics prescription for an acute airway infection significantly varies depending upon the diagnosis type, specialty, and the location of the hospital along with many other related factors. The objective of this study is to empirically investigate the possible relationship between the antibiotics prescription rates for an acute airway infection and the degree of competition in the hospital market regions of mainly the providers of primary medical care services such as clinics, internal medicines, pediatrics and otorhinolaryngology department. Using the data from Health Insurance Review and Assessment Service (HIRA) regarding the hospitals' antibiotics prescription rates for the acute airway infection and controlling for selected variables of demand and supply sectors, this study tries to figure out that the degree of competition in the hospital market, regardless of what type of competition indexes we employed, has a statistically significant effect on the variations of antibiotics prescription rate of the clinics in local areas. This result implies that as an economic consideration itself, the change in the degree of competition in the hospital market can play a crucial role influencing the treatment behaviors of the medical doctors. More specifically, this study reveals that as the degree of competition increases the antibiotics prescription rate goes up. This result means that if the market becomes more competitive in a specific region so that it might cause a reduction in doctor's income, doctors with rational decision-making process, recognize that the benefit created from inducing patients' seemingly unnecessary demand for medical care (income effect) would be higher than the costs associated with sustaining their targeted income (substitution effect). It is because that the doctors are more likely to prescribe antibiotics which create relatively higher margins than other medical care services in order to sustain their targeted income when the hospital market competition becomes tighter. Even though this study empirically confirms that antibiotics prescription can be affected by the economic incentives, it still raises following issues as limitations of the study: first issue is about the representativeness of the hospital regions segregated for this study, which might be weak in explaining whether these regions are mutually exclusive in reality. Patients actually consider the quality of services, transportation cost, time costs, and any other related factors choosing the doctors or hospitals, and in that sense, this study rules out 'border-crossing' in using the medical care services. Second issue arises in capturing the data of antibiotics prescription rate. Since we use the average rate for each medical institution, we cannot figure out the average rate for each patient so that we are not able to control for the variation of patients' medical conditions. It is because of the unavailability of data regarding each patient's medical condition from HIRA. Thirdly, since this study mainly analyzes the medical institutions providing primary care such as clinics, internal medicines, pediatrics, and otorhinolaryngology department, it is skeptical of whether those institutions can represent the hospital market in respective regions and truly reflect the degree of competition. It needs to extend the study areas and disease types as well as any micro data for future studies.

• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.2
• /
• pp.3-34
• /
• 2018

Korea's air transport industry has a 70-year history since Korea National Airline was establishment in October 1948. Korea has 9 airlines which have international air transport business licenses, and as of 2017, air transport performance(Domestic & International) is ranked 8th in the world. Through analysis of Korea's air transport industry, this paper examines the essential problems of the domestic air transport industry and what policies and laws should be supplemented, and presents an "Policy Directions for the Air Transport Industry" that can continue to grow into a global aviation leading country in the future. Analysis of aviation statistics shows that the nation's air transport industry has a very high growth rate, and national airlines continue to invest in sustainable growth. Furthermore, new companies are also trying to enter the market. As of November 2018, four companies applied for licenses for international air transport business, one for international air transport business (cargo) license, and the Ministry of Land, Infrastructure and Transport is expected to decide whether to issue the license by first quarter of 2019. While some expect price reductions and consumer benefits through competition promotion, others worry about worsening airline financial structures and reducing safety investment due to competition. To sum up the problems of the nation's air transport industry, first, low-cost airlines focus only on attracting domestic demand, and thus have a weak foundation for continued growth. Second, the rapid growth in recent years has led to the lack of aviation professionals such as pilots and technicians and the saturation of slots at major airports. Third, since the financial soundness of airlines is not systematically managed, the financial situation of airlines can quickly deteriorate and the damage can be attributed to consumers. In order for the national airlines to continue to develop, the first is to focus on the endless demand of the global aviation market and to secure international competitiveness. Second, the government should support the airline infrastructure according to the size of the air transport industry, third, we will systematically nurture aviation experts who will lead the future of the nation's air transport industry, and finally, the government will have to continuously manage the financial status of airlines to prevent consumer damage in advance. Nowadays the air transport industry has become very competitive. Not only do airlines have to work hard for the sustainable development of national airlines, but all government agencies must support our airline companies in policy to win international competition.

• Korean Journal of Community Nutrition
• /
• v.26 no.3
• /
• pp.188-199
• /
• 2021

Objectives: The purpose was to identify the ingredients that are usually surveyed for assessing real prices and to present the demand for such surveys by nutrition teachers and dietitians for ingredients used by school foodservice. Methods: A survey was conducted online from December 2019 to January 2020. The survey questionnaire was distributed to 1,158 nutrition teachers and dietitians from elementary, middle, and high schools nationwide, and 439 (37.9% return rate) of the 1,158 were collected and used for data analysis. Results: The ingredients which were investigated for price realities directly by schools were industrial products in 228 schools (51.8%), fruits in 169 schools (38.4%), and specialty crops in 166 schools (37.7%). Moreover, nutrition teachers and dietitians in elementary, middle, and high schools searched in different ways for the real prices of ingredients. In elementary schools, there was a high demand for price information about grains, vegetables or root and tuber crops, special crops, fruits, eggs, fishes, and organic and locally grown ingredients by the School Foodservice Support Centers. Real price information about meats, industrial products, and pickled processed products were sought from the external specialized institutions. In addition, nutrition teachers and dietitians in middle and high schools wanted to obtain prices of all of the ingredients from the Offices of Education or the District Office of Education. Conclusions: Schools want to efficiently use the time or money spent on research for the real prices of ingredients through reputable organizations or to co-work with other nutrition teachers and dietitians. The results of this study will be useful in understanding the current status of the surveys carried out to determine the real price information for ingredients used by the school foodservice.

• Journal of Biosystems Engineering
• /
• v.6 no.2
• /
• pp.20-32
• /
• 1982

This survey was conducted to investigate the present status of farm tractor utilization for obtaining a basic reference to the establishment of the government's agricultural mechanization strategies. Thirty two counties from the eight provinces except Jeju were covered in this study. From these selected areas, 433 sample farms having farm tractor were taken to obtain the general informations by the enquete, and 93 sample farms among them to investigate the status of daily tractor use in the year of 1980. The analyzed results are summarized as follows: 1. Farm tractors owned by the rice-oriented farms holds 71.5 percent of the total number of tractors the livestock-oriented farms 17.0 percent, and the orchard-oriented farms 7.0 percent. Among the farm tractors 64.3 percent was a large size (46ps) and 35.7 percent a small size(19~23ps). 2. Most of the tractors surveyed were equipped with the essential attachments such as plow and rotavator. About 18 percent of the tractor owners had no trailer, which seemed too high considering the large percentage of tractor use for transportation. The availability of other attachments was very low except a grader on the rice-oriented farms and a hay harvester and a front loader on the livestock-oriented farms. 3. The average size of farm was 3.9 hectare for the rice-oriented farms, 13.9 hectare for the livestock-oriented farms and 7.4 hectare for the orchard-oriented farms. It was obious that the average farm size of was too small compared to the theoretical machine capacity of the tractors. 4. About 70 percent of the tractor operators were in the age of twenties and thirties. About 90 percent of them had an educational level of middle school graduate or above even though their technical level was very low. 5. Any particular problem in tractor use was not found in this survey. From the farmer's preference for purchasing a new tractor, however, it is estimated the demand on a 20-30ps tractor will be more increased. 6. The average annual use of tractor was of about 100 days or 400 hours. It appeared that the rice-oriented farms used most with 412.4 hours per year, and followed by the livestock-oriented farms with 403.6 hours, the orchard oriented farms with 377.7 hours. 7. Among the total hours of tractor use, 47.3 percent was for transportation, and 41.6 percent was for plowing and rotary tillage. The largest portion of the annual tractor use was taken by transportation on the livestock-oriented farms, by land preperation on the rice-oriented farms, and by loading and chemical spraying on the orchard-oriented farms. 8. The hours of tractor use had a peak in May. The hours of use for own farm was remarkably different among the different farm oriented, but there was no considerable difference between the too different sizes of tractor. 9. The hours of tractor use decreased as the age of the operator or the educational level increased. The reason might be that the operators who had a high educational level or were older had a tendency of disliking custom works. 10. The average custom use of tractor was 171.3 hours per year, and the ratio of custom work was 63.7 percent on the rice-oriented farms, 31.7 percent on the livestock-oriented farms and 22.4 percent on the orchard-oriented farms. Among the custom works, the most popular one was the grader leveling. 11. The charge on custom work was about 40,000 Won per hectare for plowing and rotary tillage, and it was the most expensive in the southeastern region, and next followed by the southwestern region. 12. The average plowing capacity of the small tractor was 7.8 hours per hectare in the paddy field, and that of the large tractors was 4.3 hours per hectare. The average rotary-tilling capacities of the small and the large tractors were 6.5 and 4.3 hours per hectare, in the paddy field respectively.

• Korean Security Journal
• /
• no.41
• /
• pp.37-66
• /
• 2014

In recent years, with the development of computers and electronics, electronics and communication technology in a growing and each part is dependent on the cross-referencing makes all electronic equipment is obsolete due to direct or indirect damage EMP. Korea and the impending standoff North Korea has a considerable level of technologies related to the EMP, EMP weapons you already have or in a few years, the development of EMP weapons will complete. North Korea launched a long-range missile and conducted a nuclear test on several occasions immediately after, when I saw the high-altitude nuclear blackmail has been strengthening the outright offensive nuclear EMP attacks at any time and practical significance for the EMP will need offensive skills would improve. At this point you can predict the damage situation of Korea's security reality that satisfy the need, more than anything else to build a protective system of the EMP. The scale of the damage that unforeseen but significant military damage and socio-economic damage and fatalities when I looked into the situation which started out as a satellite communications systems and equipment to attack military and security systems and transportation, finance, national emergency system, such as the damage elsewhere. In General, there is no direct casualties reported, but EMP medical devices that rely on lethal damage to people who can show up. In addition, the State power system failure due to a power supply interruption would not have thought the damage would bring State highly dependent on domestic power generation of nuclear plants is a serious nuclear power plant accident in the event of a blackout phenomenon can lead to the plant's internal problems should see a forecast. First of all, a special expert Committee of the EMP, the demand for protective facilities and equipment and conduct an investigation, he takes fits into your budget is under strict criteria by configuring the contractors should be sifting through. He then created the Agency for verification of performance EMP protection after you have verified the performance of maintenance, maintenance, safety and security management, design and construction company organized and systematic process Guard facilities or secret communications equipment and perfect for the EMP, such as protective equipment maneuver system should take.