• 한국건축시공학회지
• /
• 제8권3호
• /
• pp.101-109
• /
• 2008

As the number of high-rise building construction projects grows up, the subject of the transportation planning has become one of the grave issue. however important decision making are made by the experience of the a planner without the rational plans for information sharing. therefore, the purpose of this study is to suggest a plan of prefect information management not only for describing drafting process for transportation planning but also for systematizing information used in the procurement, transportation and construction phase to achieve these objectives, this study 1)analyzes the prior theory about transportation planning, 2)performs a case study of actual project to embody the problems of site management by analyzing the results of interviewing experts. In conclusion, the following factors are systematized : 1)the structure of drafting process for transportation planning, 2)the contents of information used in the procurement, transportation and construction phase, 3)the actual condition of code breakdown structure in transportation Planning phase. It is anticipated that the proposed methodology would be able to improve information management among the related engineers and accumulated data that might be used in similar construction projects in Korea.

• 한국지역지리학회지
• /
• 제14권5호
• /
• pp.587-603
• /
• 2008

본 연구에서는 웅치 지역에서 교통로가 변화하는 과정을 도보 시대와 자동차 시대로 구분하고, 교통로 변환의 요인과 특성을 사회적 측면과 기술적 측면에서 살펴봤다. 웅치 지역의 교통로 개설에서 가장 큰 지형적 제약 조건은 분수계를 중심으로 한 동서의 상대고도 차이와 특히 서쪽의 급경사 부분이었다. 이러한 제한 조건을 극복하기 위해서 도보시대에는 이용 목적에 따라 다양한 노선이 개설되어 이용되어 왔고, 1910년대 신작로 개설 이후 자동차 시대에는 경사도와 굽이를 줄이려는 노력이 계속되었고 특정 교통로가 중점적으로 이용되었다. 이 지역 교통로 변화의 사회적 측면에서의 특징은 첫째, 도보시대에는 다양한 노선이 동시에 이용되었지만, 자동차 시대에는 특정 노선만이 집중적으로 이용되었다. 둘째, 교통사고나 대규모 행사에 따른 사회적 필요에 의해서 새로운 도로의 개설이 추진되었다. 셋째, 지형 조건을 극복하기 위한 지역 범위가 확대되었다. 넷째, 교통 노선의 변화는 노선관련 취락의 성쇠에 영향을 주었다. 그리고 기술적인 측면에서는 첫째, 터널을 뚫는 방법을 사용했다. 둘째, 굽이 즉 최소곡선반경(R)을 완화하려는 노력을 계속해 왔다. 셋째, 경사도를 완화하려는 노력을 계속해 왔다. 넷째, 음지보다는 양지를 향하게 하는 방향을 고려했다.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2017년도 춘계학술논문요약집
• /
• pp.153-154
• /
• 2017

The thermal analysis of transportation and storage cask for SNF was conducted during short term loading operations for forced gas drying condition. The fuel cladding temperature in 6 regions of SNF in the cask during the short term loading operations for forced gas drying condition is shown in the Fig. 3. The thermal analysis results of calculated maximum cladding temperature in each process demonstrate that operating scenario of TFD in detailed design maintain well below the temperature limits of $400^{\circ}C$.

• International Journal of Fluid Machinery and Systems
• /
• 제7권1호
• /
• pp.1-6
• /
• 2014

The propellant acquisition vane (PAV) is a key part of a vane type surface tension propellant management device (PMD), which can manage the propellant effectively. In the present paper, the fluid transportation behaviors for five PAVs with different sections were investigated by using microgravity drop tower test. Further, numerical simulation for the propellant flow in a PMD under microgravity condition was also carried out based on VOF model, and showed the similar flow pattern for PAVs to the experiment. It is noted that the section geometry of PAVs is one of the main factors affecting the fluid transportation behavior of PMD. PAVs with bottom length ratio of 5/6 and 1/2 have larger propellant transportation velocity. Based on the experiments, there were two stages during the process of propellant transportation under microgravity environment: liquid relocation and steady transportation stage. It is also recognized that there is a linear correlation between liquid transportation velocity and relative time's square root. Those results can not only provide a guideline for optimization of new vane type PMDs, but also are helpful for fluid control applications in space environment.

• 한국자동차공학회논문집
• /
• 제19권2호
• /
• pp.133-141
• /
• 2011

The effect of payload on fuel consumption and emission of light duty freight truck during acceleration driving has been analyzed. Running tests were carried out with various payload conditions on chassis dynamometer. A typical driving pattern for urban cities was used. Real time emission measurement systems for gaseous and soot emission were utilized to investigate the real time dynamic of fuel use and exhaust emissions. It was observed that fuel use and pollutant emissions were increased as payload was increased. Under the same payload condition, the increased amount of acceleration driving is much higher than that of steady state driving. The results demonstrated the advantages of eco-driving, which is an environmentally friendly driving manner, could be emphasized in heavier payload condition. Inertial tractive power was introduced for considering the parameters affecting emission during acceleration driving, which are speed, acceleration and payload. Fuel use and emission in various driving conditions were expressed as functions of inertial tractive power. The estimated result by these functions well predicted measured result within 10 % deviation.

• 대한교통학회지
• /
• 제28권4호
• /
• pp.167-175
• /
• 2010

유비쿼터스 통신 및 센서네트워크 기술발전으로, 기존 ITS(Intelligent Transportation System) 환경에서 불가능했던 미시 교통류 정보의 수집 가공과 V2V(Vehicle-to-Vehicle), V2I(Vehicle-to-Infra) 양방 통신환경을 활용한 개별차량 및 차량군 단위의 미세제어가 가능해졌다. 이에, 유비쿼터스 기술진보에 맞춘 진일보된 교통운영기술로서 적정속도 관리 알고리즘을 제시하고 그 알고리즘의 성능과 효과를 평가하였다. 적정속도 관리 알고리즘은, 소통원활 상황에서 과속을 억제하고 개별운전자간 속도 편차를 최소화함을 목표로 하는 과속저속관리와, 교통류가 임계상태에 가까워 졌을 때 혼잡교통류로의 전이를 예방 혹은 최대한 늦추는 것을 목표로 하는 밀도관리로 구성된다. 현재 교통 상용 시뮬레이션 소프트웨어로는 개발차량의 속도를 관리하는 본 연구의 알고리즘 모사와 평가가 불가능하여, COM(Component Object Model) Interface를 통해 VISSIM과 직접 작성한 프로그램 코드를 가지고 시뮬레이션 테스트 베드를 구축하여 이러한 효과평가를 수행하였다. 평가 결과 본 연구에서 제안한 알고리즘에 의해 적정속도를 관리 할 경우, 혼잡이 줄어들고 통행시간도 감소하는 효과를 볼 수 있었다.

• Geomechanics and Engineering
• /
• 제17권3호
• /
• pp.227-236
• /
• 2019

In practice, the natural slopes are frequently with soils of spatial properties and irregular features. The traditional limit analysis method meets an inherent difficulty to deal with the stability problem for such slopes due to the normal condition in the associated flow rule. To overcome the problem, a novel technique based on the upper bound limit analysis, which is called the discretization technique, is employed for the stability evaluation of complex slopes. In this paper, the discretization mechanism for complex slopes was presented, and the safety factors of several examples were calculated. The good agreement between the discretization-based and previous results shows the accuracy of the proposed mechanism, proving that it can be an alternative and reliable approach for complex slope stability analysis.

• 한국수소및신에너지학회논문집
• /
• 제30권1호
• /
• pp.76-82
• /
• 2019

This study was investigate the characteristics of GHGs ($CO_2$, $CH_4$, and $N_2O$) emissions of diesel medium duty trucks according to their various driving modes. GHGs emissions decreased as vehicle speed increased, and emissions increased after 64.7 km/h. The 4.5 ton trucks show higher values of $CO_2$, $CH_4$, $N_2O$, 35%, 25%, and 57%, respectively, comparing of the 2.5 ton trucks. Also, $CO_2$ emissions under WHVC mode were 20% lower than those under the NEDC mode. In the case of cold start condition, $CO_2$ emissions were 12-13% higher than those for hot start condition. In the future, the result of present study will provide basic data to set up GHGs emission standards for medium and heavy duty vehicles.

• Journal of Biosystems Engineering
• /
• 제24권5호
• /
• pp.399-406
• /
• 1999

This study was conducted to investigate the labor requirements and transportation cost of paddy for the different harvest and transportation systems for obtaining a basic reference to the improvement of present harvest-transportation systems. One hundred and eighty five farm households with sack type combine harvester and thirty farm households with bulk type combine harvester were surveyed for thirty counties from eight provinces except jeju and also eleven Rice Processing Complex were covered for this survey. This survey was carried from 8th. October 1997 to 5th. November 1997. For the labor requirements, bulk trailer system require 6.8th/ha, 10.3/ha for sack harvest-tractor trailer, and 8.8h/ha for bulk harvest-container bag. The machinery utilization cost for the different paddy harvest-transportation systems, combine sack harvest-tractor trailer system is 282 thousand won/ha, and most economical compared with other systems. Combine bulk harvest with tractor system was 416 thousands won/ha and combine bulk harvest with container bag system was 446 thousands won/ha. In order to propagate bulk harvest-transportation system, a proper bulk transportation means with considering road condition in the paddy field and paddy size should be developed, and considering cycle time it appeared that the proper capacity of bulk container was 3.5ton at the present.

• 방사성폐기물학회지
• /
• 제18권4호
• /
• pp.537-548
• /
• 2020

Currently, radioactive waste for disposal has been restricted to low and intermediate level radioactive waste generated during operation of nuclear power plants, and these radioactive wastes were managed and disposed of the 200 L and 320 L of steel drums. However, it is expected that it will be difficult to manage a large amount of decommissioning waste of the Kori unit 1 with the existing drums and transportation containers. Accordingly, the KORAD is currently developing various and large-sized containers for packaging, transportation, and disposal of decommissioning waste. In this study, the radiation exposure doses of workers and the public were evaluated using RADTRAN computational analysis code in case of the domestic on-road transportation of new package and transportation containers under development. The results were compared with the domestic annual dose limit. In addition, the sensitivity of the expected exposure dose according to the change in the leakage rate of radionuclides in the waste packaging was evaluated. As a result of the evaluation, it was confirmed that the exposure dose under normal and accident condition was less than the domestic annual exposure dose limit. However, in the case of a number of loading and unloading operations, working systems should be prepared to reduce the exposure of workers.