• Journal of Biosystems Engineering
• /
• v.31 no.3 s.116
• /
• pp.161-167
• /
• 2006

The purpose of this study is to find the optimal conditions of PCM slurry manufacturing equipment for saving the marketing cost and keeping the original quality of products. In addition, the characteristics of the movable container for shipping or distributing products is analysed. The major results are as follows. 1. PCM thermal storage system is designed with the conditions of temperature($-5{\sim}10^{\circ}C$), cold chain time(30 minutes), and one time usage(50 liter). This system includes tank, freezer, circulating pump, cycle type heat exchanger, swelling tank, equipment of supplying PCM supplying unit includes cold tank, cycle type heat exchanger, suction unit and control equipments, etc. 2. After ability test of PCM thermal storage system, it shows that the required freezing time of PCM thermal storage system is less than one of the previous system. The reason is that churn (top and bottom) and compulsion circulation are occurred simultaneously and unit cooler type method is better than chiller type method. 3. By the experiment of transportation latent heat container, it is decided that the best container is $K_1$ with latent heat temperature($0{\sim}5^{\circ}C$) and density(0.15%). However, for $K_l\;and\;K_2$, it is necessary more studies on latent heat thermal conditions and conditions of making method.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.6
• /
• pp.530-537
• /
• 2014

A controller design method for a battery-energy storage system using a linearized battery model is presented in this paper. The suggested linear battery model is expressed with open-circuit voltage having three relaxation filters and a linear output equation. A method to obtain on-line resistance and maximum available power is also presented. The battery state of charge information is obtained by Kalman filter, and its performance is verified by FTP75 driving cycles. The controller for power converter is designed and experimented with a 250 V battery pack. The proposed control method is simple and easy to apply to a real system.

• Proceedings of the Korea Contents Association Conference
• /
• 2016.05a
• /
• pp.485-486
• /
• 2016

이 논문에서는 비휘발성 메모리 (NVRAM)과 DRAM을 결합하여 고속의 신뢰성 있는 하이브리드 블록 스토리지를 개발한다. 기존의 DRAM을 기반으로 하는 리눅스의 RAM 디스크는 고속의 입출력성능을 제공하지만, 시스템 고장이 발행할 경우 모든 데이터를 잃어버리게 된다. 일부에서 DRAM과 하드디스크를 결합하여 시스템 고장에도 안정적으로 데이터를 유지하기 위한 방법이 제안된바 있지만, 입출력 성능이 RAM 디스크에 비해 상당히 저하된다. 이 논문에서는 DRAM, NVRAM, 하드디스크를 결합하여 DRAM의 입출력 성능에 가까우면서 안정적으로 데이터를 저장할수 있는 블록 스토리지를 개발한다.

• Journal of Hydrogen and New Energy
• /
• v.10 no.1
• /
• pp.41-48
• /
• 1999

The heat transportation from a complex of industry to a rural area needs more efficient method because the distance between them is usually more than 10km. Conventional heat transportation using steam or hot water via pipe line has limits in transportation distance (about 3-5 km) because of the heat loss and frictional loss in the pipe line. Metal hydride can absorb or discharge hydrogen through exothermic and endothermic reaction. After releasing hydrogen from metal hydride with heatings by waste heat from industry we can transport this hydrogen to the rural area via pipe line. In the urban areas other metal hydride reacts with this hydrogen and produces heat for heating. Cool heat is also obtained if it is possible to use metal hydride with low reaction temperature. So metal hydride can be used as a media for transportation, storage of heat. Some problems of the heat transportation using metal hydrides, and the example of heat transportation system were discussed.

• Journal of Distribution Science
• /
• v.7 no.4
• /
• pp.47-56
• /
• 2009

The purpose of this study is to present an alternative improving the efficient and reasonable of the physical distribution system management is influenced by many factors. Therefore, the study depends on the documentary method and survey method to achieve the purpose of this study. The major components of a physical distribution system are refers to as elements, include warehouse·storage system, transportation system, inventory system, physical distribution information system. The factors used in this study are ① factor of product(quality·A/S·added value of product·adaption of product·technical competitive power to other enterprises), ② factor of market(market channel·kinds of customer·physical distribution share), ③ factor of warehouse·storage(warehouse design·size·direction·storage ability·warehouse quality), ④ factor of transportation(promptness·reliability·responsibility·kinds of transportation·cooperation united transportation system·national transportation network), ⑤ factor of packaging (packaging design·material·educating program·pollution degree measure program), ⑥ factor of inventory(ordinary inventory criterion·consistence for inventories record), ⑦ factor of unloaded(unloaded machine·having machine ratio), ⑧ factor of information system (physical distribution quantity analysis·usable computer part), ⑨ factor of physical distribution cost(sales ratio to product) ⑩ factor of physical distribution system(physical distribution center etc). The implication of this study can be summarized as follows: ① In firms that have not adopted a systems integrative approach, physical distribution is a fragmented and often uncoordinated set of activities spread throughout various functions with function having its own set of priorities and measurements. ② The physical distribution is recognized as more an important strategic factor than a simple cost reduction factor, ③ It can be used a strategic competition tool to enterprise.

• Journal of the Society of Disaster Information
• /
• v.17 no.1
• /
• pp.176-183
• /
• 2021

Purpose: The introduction of smart factories that reflect the 4th industrial revolution technologies such as AI, IoT, and VR, has been actively promoted in Korea. However, in order to solve various problems arising from existing file-based operating systems, this research will focus on identifying and verifying non-file system-based data protection technology. Method: The research will measure security storage that cannot be identified or controlled by the operating system. How to activate secure storage based on the input of digital key values. Establish a control unit that provides input and output information based on BIOS activation. Observe non-file-type structure so that mapping behavior using second meta-data can be performed according to the activation of the secure storage. Result: First, the creation of non-file system-based secure storage's data input/output were found to match the hash function value of the sample data with the hash function value of the normal storage and data. Second, the data protection performance experiments in secure storage were compared to the hash function value of the original file with the hash function value of the secure storage after ransomware activity to verify data protection performance against malicious ransomware. Conclusion: Smart factory technology is a nationally promoted technology that is being introduced to the public and this research implemented and experimented on a new concept of data protection technology to protect crucial data within the information system. In order to protect sensitive data, implementation of non-file-type secure storage technology that is non-dependent on file system is highly recommended. This research has proven the security and safety of such technology and verified its purpose.

• Spatial Information Research
• /
• v.4 no.1
• /
• pp.43-54
• /
• 1996

The purpose of this study is to provide GIS application to the emergency medical service management system in the Seoul area. Two wards, Kangnam-Gu and Songpa-Gu, were selected for a pilot study subject. The main focus of the study was to develope the network system using GIS which could select the most available hospital from the site being emergency case and advise the minimum path to the hospital. ARC/INFO pc version was need to implemeni an indexing system for automated mapping and data storage. The developed system, "Emergency Medical System based on GIS ${\ulcorner}$EMS/GIS${\lrcorner}m$", consists of the cartographic database and vehicle transportation system. The results suggest that EMS/GIS network are needed to connect the local transportation network between major emergency care hospitals and central conirol tower in the near future. If the EMS/GIS system could be more developed based in further analysis, it would be the most useful economical and efficient for emergency medical service with mutual aid system.al aid system.

• IE interfaces
• /
• v.13 no.3
• /
• pp.431-437
• /
• 2000

This paper refers to the flow of products from supplier to discount retailers(DRs). Discount retailers prefer frequent delivery of small amount because of limited storage space, while suppliers prefer less frequent delivery of larger amount in order to save transportation cost. In this paper we propose a heuristic algorithm to determine the amount of order and the frequency of delivery which decreases the expected length of stockout. We also evaluate various order policies for Vendor Managed Inventory(VMI) system using simulation with real data.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2000.11a
• /
• pp.161-175
• /
• 2000

This study includes the fundamental planning of the sectoral management technology in energy distribution system so that the industry itself would be willing to participate for the effective energy conservation in its own sector. Furthermore guidlines for the effective energy management techniques have been presented by first analyzing the energy consumption structures, the energy loss problems, the energy conservation status and the technology demands, and second classifying, according to the energy distribution system, the energy source management, the energy generation & conversion facilities, the energy transportation ＆ storage facilities, the energy consumming facilities and the waste energy management, etc. in the industrial sector.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.11 no.1
• /
• pp.17-24
• /
• 2005

During handling unitized products, they are subjected to a variety environmental hazards. Shock and vibration hazards are generally considered the most damaging of the environmental hazards on a product, and it may encounter while passing through the distribution environment. A major cause of shock damage to products is drops during manual handling. The increasing use of unitization on pallets has been resulted in a reduction in the manual handling of products and with it a reduction in the shock hazards. This has caused and increasing interest in research focused on vibration caused damage. the use of pallets as a base for unitizing loads, aids in the mechanical handling, transportation and storage of products. Besides aiding in the handling, transportation and storage of products, a pallet also acts on and interface between the packaged goods and the distribution environment. The determination of the impact deformation of the cushioning materials such as tray cup (polymeric foam) and corrugated fiberboard pad must be carried out to design the proper packaging system providing adequate protection for the fruit, and to understand the complex interaction between the components of fruit when they relate to expected transportation vibration inputs. In this study, the theoretical analysis of impact deformation for cushioning materials by dynamic vibration. The impact deformations of SW and DW corrugated fiberboard pad in acceleration amplitudes of 0.25 G-rms and 0.5 G-rms that were usually generated in transport vehicles during distribution environments were very small compare with the thickness of corrugated fiberboard pad. The maximum of vibration acceleration level of tray cup by vibration impact was about 3.2 G-rms. The theoretical allowable acceleration (G-factor) of the pear was 0.7102 G-rms, and the maximum dynamic deformation estimated within G-factor was about 1 mm.