• Korea-Australia Rheology Journal
• /
• v.17 no.4
• /
• pp.207-215
• /
• 2005

We present a finite difference solution for electrokinetic flow in rectangular microchannels encompassing Navier's fluid slip phenomena. The externally applied body force originated from between the nonlinear Poisson-Boltzmann field around the channel wall and the flow-induced electric field is employed in the equation of motion. The basic principle of net current conservation is applied in the ion transport. The effects of the slip length and the long-range repulsion upon the velocity profile are examined in conjunction with the friction factor. It is evident that the fluid slip counteracts the effect by the electric double layer and induces a larger flow rate. Particle streak imaging by fluorescent microscope and the data processing method developed ourselves are applied to straight channel designed to allow for flow visualization of dilute latex colloids underlying the condition of simple fluid. The reliability of the velocity profile determined by the flow imaging is justified by comparing with the finite difference solution. We recognized the behavior of fluid slip in velocity profiles at the hydrophobic surface of polydimethylsiloxane wall, from which the slip length was evaluated for different conditions.

• Journal of Microbiology
• /
• v.41 no.4
• /
• pp.271-276
• /
• 2003

The inoculation of some microorganisms into a microcosm containing soil from a barren lakeside area at Lake Paro in Kangwon-do enhanced plant growth significantly. The direct and viable counts of soil bacteria and soil microbial activities measured by electron transport system assay and fluorescein diacetate hydrolysis assay were higher in inoculated soil. The plant growth promoting effect of this inoculation may be caused by phytohormone production and the solubilization of insoluble phosphates by the inoculated bacteria. Three inoculated strains of Pseudomonas fluorescens produced several plant growth promoting phytohormones, including indole-3-acetic acid (auxin), which was confirmed by thin layer chromatography and GC/MS. P. fluorescens strain B16 and M45 produced 502.4 and 206.1 mg/l of soluble phosphate from Ca3(PO4)2 and hydroxyapatite, respectively. Bacillus megaterium showed similar solubilization rates of insoluble phosphates to those of Pseudomonas spp. We believe that this plant growth promoting capability may be used for the rapid revegetation of barren or disturbed land.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.158-161
• /
• 2006

Superstrate pin amorphous silicon thin-film (a-Si:H) solar cells are prepared on $SnO_2:F$ and ZnO:Al transparent conducting oxides (TCO) In order to see the effect of TCO/P-layers on a-Si:H solar cell operation. The solar cells prepared on textured ZnO:Al have higher open circuit voltage $V_{oc}$ than cells prepared on $SnO_2:F$. Presence of thin microcrystalline p-type silicon layer $({\mu}c-Si:H)$ between ZnO:Al and p a-SiC:H plays a major role by causing improvement in fill factor as well as $V_{oc}$, of a-Si:H solar cells prepared on ZnO:Al TCO. Without any treatment of pi interface, we could obtain high $V_{oc}$, of 994mv while keeping fill factor (72.7%) and short circuit current density $J_{sc}$ at the same level as for the cells on $SnO_2:F$ TCO. This high $V_{oc}$ value can be attributed to modification in the current transport in this region due to creation of a potential barrier.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.8
• /
• pp.1391-1400
• /
• 2008

In recent yeats, SCTP is known as the next transport layer protocol for connection-oriented and reliable data transfer after TCP/UDP. The SCTP was developed on the basis of the existing TCP and was designed to eliminate defects of TCP. SCTP has the different characteristic of multi-streaming and multi-homing from TCP. In this paper, we studied the defects of the performance of communication using the traits of multi-homing. And we evaluated the efficiency for each application services on the basis of SCTP of IPv6. Also, we analysed the delay time of a packet using SCTP and TCP. We noticed that the efficiency of SCTP is better than that of TCP.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.302-302
• /
• 2015

본 연구에서는 PMP 조건하에서 농업용 목적의 시례저수지의 가상붕괴에 따른 홍수파 해석을 통해서 하류부에 대한 수리학적 분석을 실시하였다. 그리고, 사력댐으로 구성된 댐 제체의 붕괴로 인한 유사 이송을 모의하고 이로 인한 하류부에서의 영향을 분석하였다. 이를 위하여 경상남도 김해에 위치한 시례저수지 유역을 대상으로 수리 수문자료 및 하천현황을 상세히 조사하고 댐의 가상 붕괴로 인한 하류부 홍수파 해석 및 댐 본체의 유실에 따른 유사의 이송으로 인해 발생 가능한 하류부에서의 영향을 분석하였다. 시례저수지의 댐 형식은 흙댐으로써, 구성방식은 침하량이 적은 중심코아형이며 댐 높이는 34.3 m, 유역면적은 3.13 km이다. 본 연구에서는 하천에서의 흐름과 유사이송 계산이 가능한 1차원 수치 모형인 CCHE1D를 이용하였다. 적용 모형은 확산파 및 동역학적 방정식을 모두 고려한다. 또한, 비평형 이송 모형을 사용하여 유사의 발생과 퇴적을 산정하고 비균질 상태의 유사 이송을 계산 하는데 있어서 하천 단면형의 변화와 하상물질의 구성 상태, 제방침식, 수로 확폭의 과정과 함께 산정된다. CCHE1D는 하상물질의 공극률과 non-equilibrium adaptation length, mixing layer thickness 등의 여러 변수들을 현재까지 개발된 식들을 제공하며, 토사이동해석을 위한 공식은 SEDTRA 모듈, Wu et al(2000) 공식, 수정 Ackers and White(1973) 공식, 수정 Engelund and Hansen(1967)이 사용된다. 비균질 유사이송과 bed deformation, bed-material sorting은 완전연계과정(coupling)로, 유사와 흐름방정식의 계산은 반연계과정(semi coupling)을 적용하여 계산하였다.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.2
• /
• pp.1-7
• /
• 2011

PEM 연료전지에 있어서 수분의 균형이 연료전지의 시스템 성능에 현저한 영향을 미친다. 그래서 수분 균형은 가장 중요한 요소 중의 일부가 되었으며, 이에 관한 연구가 광범위하게 이루어지고 있다. 적절한 수분 균형을 유지하기 위해서는 적당한 멤브레인 수화작용(membrane hydration)이 필요하며, 반대로 촉매층(catalyst layer)에서의 익수(water flooding)현상이 없어져야 한다. 따라서 이와 같은 동적 상태에서 PEM 연료전지 내의 수분 균형을 유지하기 위해서는, 고도의 동적 수분 조정 기술이 확보되어야 한다. 현재의 연구는 이러한 특성을 고려하여 PEM 연료전지에서 동적부하 상태에서의 수분 이동에 관한 일차원 해석 모델에 관한 것이다. 금번 모델링의 결과, 양극촉매층(CCL, cathode catalystlayer)에서의 수분 상태는 거의 포화 단계에 이르고 있음을 보여주고 있으며, 이 모델링은 연료전지가 작동되는 동안의 CCL에 나타나는 수분의 양상을 예측하는데 활용될 수 있다. 본 논문에서는 수분 이동 모델이 국제규격에 따라 다양한 수송기관이 가동될 때, 동적부하 상태에서 서로 다른 차이점을 발견하기 위한 시뮬레이션 결과에 초점이 맞추어져 있다. 이 모델링을 적용한 결과, 수분 포화도가 상태에 따라 상이하게 나타남을 알 수 있었고, 또한 정적 수분 조절 요소에 따라 최적 상태가 모든 동적 분포에 따라 달라짐을 알 수 있었다.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.905-917
• /
• 2008

Road or Railway construction over soft ground is needed to be considered on secondary consolidation which will be caused differential settlement, lack of transport serviceability, higher maintenance cost. Especially for the railway construction in the second phase of Gyung-Bu or Ho-Nam high speed railway, concrete slab track has been adapted as a safe and cost effective geotechnical solution. In this case controlling the total settlement under the tolerance is essential. And pile supported geogrid reinforced construction method is suggested as a solution for the problem of the traditional method on soft soil treatments. Pile supported geogrid reinforced construction method consists of piles that are designed to transfer the load of the embankment through the compressible soil layer to a firm foundation. The load from the embankment must be effectively transferred to the piles to prevent punching of the piles through the embankment fill creating differential settlement at the surface of the embankment. The arrangement of the piles can create soil arching to carry the load of embankment to the piles. In order to minimize the number of piles geogrid reinforced pile supported construction method is being used on a regular basis. This method consists of one or more layers of geogrid reinforcement placed between the top of the piles and the bottom of the embankment. This paper presents several methods of pile supported geogrid reinforced construction and calculation results from the several methods and comparison of them.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.3
• /
• pp.1-5
• /
• 2009

In this study, we have shown the power conversion efficiency of organic thin film photovoltaic devices utilizing a conjugated polymer/fullerene bulk-hetero junction structure. We use MDMO-PPV(Poly[2-methoxy-5-(3,7-dimethyloctyloxy -1,4-phenylenevinylene) as an electron donor, PCBM([6,6]-Phenyl C61 butyric acid methyl ester) as an electron accepter, and PEDOT:PSS used as a HTL(Hole Transport Layer). We have fabricated OPV(Organic Photovoltaic) devices as a function of the MDMO-PPV/PCBM concentration from 1:1 to 1:5. The electrical characteristics of the fabricated devices were investigated by means of I-V, P-V, F·F(Fill Factor) and PCE(power conversion efficiency). The power conversion efficiency was gradually increased until 1:4 ratio, also the highest efficiency of 0.4996% was obtained at the ratio.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.15 no.1
• /
• pp.53-59
• /
• 2019

As the number of harmful sites increases, many social problems are occurring. Therefore, in order to solve this problem, the government is carrying out activities to block access to web sites to harmful sites based on the law. However, due to the change from HTTP to HTTPS protocol, it has become difficult to block the harmful sites in the existing method. In the existing HTTP protocol, a method of blocking the site corresponding to the harmful site domain list by utilizing the DNS information was used. However, due to the generalization of HTTPS, it is difficult to block the harmful sites in the existing method. Therefore, the ISP uses the method of blocking the website using the SNI field in the TLS (Transport Layer Security) Handshake protocol used for HTTPS. However, since the method using SNI field raises the concern of monitoring Internet users or exposing information about connected sites, in this paper, we proposed method which can support anonymity to Internet users while blocking harmful sites. The suggested method also can support integrity and source authentication to the transmitted data.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.448-450
• /
• 2019

Multipath TCP (MPTCP) is a standardized transport layer protocol for maximizing the use of finite network resources by using multiple interfaces simultaneously. If the characteristics of each path are the same, there is an advantage in terms of stability and bandwidth utilization compared to the existing single TCP. However, if the path characteristics are different, the performance is lower than that of a single TCP. There are many complex reasons for this, but one of the biggest impacts is the bufferbloat, which dramatically increases the latency. In this paper, we implemented an algorithm that improved MPTCP performance degradation due to bufferbloat in Linux - based testbed and compared performance with existing MPTCP scheduler.