• 한국재료학회지
• /
• 제8권5호
• /
• pp.419-423
• /
• 1998

매립형 InGaAnP/InP 레이저 다이오드 제작을 위한 질량 이동 현상의 최적화에 대한 연구를 수행하였다. Double heterostructure 레이저 다이오드 구조의 1차 성장은 액상 에피 성장 장치를 이용하였으며, 메사 에칭하였다. 활성층을 [110] 방향으로 선택적으로 에칭 한 후, 액상 에피 성장 장치를 이용하여 질량 이동 현상을 발생시켜 매립형 구조를 형성시켰다. 질량 이동 현상의 임계온도는 40분간 유지시켰을 때 $670^{\circ}C$로 나타났으며 재현성 있게 질량 이동 현상이 발생하였다. 질량 이동 현상에 의해 성장된 층의 폭은 온도증가에 따라 약간 증가하였다.

• 대한화학회지
• /
• 제43권3호
• /
• pp.315-320
• /
• 1999

고성능 전계발광(electroluminescent, EL) 소자에 사용되는 발광물질의 개발을 위하여 설계된 발광기능기의 분자구조는 비스스틸렌구조의 발광기능기에 전자주입과 수송을 위한 시안기와 정공주입과 수송을 위한 페닐아민기를 가진 구조이다. 위의 발광기능기로 구성 된 고분자물질, PU-BCN과 저분자물질, D-BCN을 합성하였다. PU-BCN과 D-BCN을 발광층으로 사용하여 만들어진 단층형 소자(SL)의 구조는 Indium-tin oxide(ITO)/발광층/MgAg이고, 적층형소자의 구조는 ITO/발광층/oxadiazole dehvative/MgAg, (DL-E)와 ITO/tri-phenylamine derivative/발광층/MgAg,(DL-H)의 두 종류이다. 동일한 발광기능기를 가진 고분자 발광물질, PU-BCN과 저분자발광물질, D-BCN은 전하주입과 수송성이 띄어난 물질로 평가되었으며, 두 발광물질들은 높은 전류밀도하에서 거의 동일한 발광특성을 보였다. 발광물질들의 최대 발광 피이크는 약 640 nm의 적색 발광영역에서 측정되었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.33-36
• /
• 2008

The transient behavior of a passive air breathing direct methanol fuel cell (DMFC) operated on vapor-feeding mode is studied in this paper. It generally takes 30 minutes after starting for the cell response to come to its steady-state and the response is sometimes unstable. A mathematical dynamic one-dimensional model for simulating transient response of the DMFC is presented. In this model a DMFC is decomposed into its subsystems using lumped model and divided into five layers, namely the anodic diffusion layer, the anodic catalyst layer, the proton exchange membrane (PEM), the cathodic catalyst layer and the cathodic diffusion layer. All layers are considered to have finite thickness, and within every one of them a set of differential-algebraic governing equations are given to represent multi-components mass balance, such as methanol, water, oxygen and carbon dioxide, charge balance, the electrochemical reaction and mass transport phenomena. A one-dimensional, isothermal and mass transport model is developed that captures the coupling between water generation and transport, oxygen consumption and natural convection. The single cell is supplied by pure methanol vapor from a methanol reservoir at the anode, and the oxygen is supplied via natural air-breathing at the cathode. The water is not supplied from external source because the cell uses the water created at the cathode using water back diffusion through nafion membrane. As a result of simulation strong effects of water transport were found out. The model analysis provides several conclusions. The performance drop after peak point is caused by insufficiency of water at the anode. The excess water at the cathode makes performance recovery impossible. The undesired crossover of the reactant methanol through the PEM causes overpotential at the cathode and limits the feeding methanol concentration.

• 한국재료학회지
• /
• 제23권8호
• /
• pp.430-434
• /
• 2013

Quantum dots(QDs) with their tunable luminescence properties are uniquely suited for use as lumophores in light emitting device. We investigate the microstructural effect on the electroluminescence(EL). Here we report the use of inorganic semiconductors as robust charge transport layers, and demonstrate devices with light emission. We chose mechanically smooth and compositionally amorphous films to prevent electrical shorts. We grew semiconducting oxide films with low free-carrier concentrations to minimize quenching of the QD EL. The hole transport layer(HTL) and electron transport layer(ETL) were chosen to have carrier concentrations and energy-band offsets similar to the QDs so that electron and hole injection into the QD layer was balanced. For the ETL and the HTL, we selected a 40-nm-thick $ZnSnO_x$ with a resistivity of $10{\Omega}{\cdot}cm$, which show bright and uniform emission at a 10 V applied bias. Light emitting uniformity was improved by reducing the rpm of QD spin coating.At a QD concentration of 15.0 mg/mL, we observed bright and uniform electroluminescence at a 12 V applied bias. The significant decrease in QD luminescence can be attributed to the non-uniform QD layers. This suggests that we should control the interface between QD layers and charge transport layers to improve the electroluminescence.

• 마이크로전자및패키징학회지
• /
• 제27권3호
• /
• pp.69-72
• /
• 2020

본 연구에서는 SnO₂ nanoparticles (NPs) 위에 TiO₂ NPs를 코팅하여 Quantum Dots Light Emitting Diodes (QLEDs)를 제작하였다. TiO₂ NPs는 SnO₂ NPs보다 conduction band minimum (CBM) 준위가 낮다. 따라서 SnO₂ 층과 발광층의 CBM 준위 사이에 위치해 에너지 장벽을 감소시키고, 전자의 이동을 원활하게 할 것으로 예상하였다. QLEDs는 inverted 구조로 제작되었으며, SnO₂ 단일층을 사용한 경우보다 발광 특성이 향상된 것을 확인하였다. 이중 전자수송층을 적용한 이번 연구를 통해 SnO₂를 QLEDs에 전자수송층으로 적용할 수 있을 것으로 기대한다.

• Journal of Mechanical Science and Technology
• /
• 제18권10호
• /
• pp.1782-1798
• /
• 2004

A numerical study of a natural convection in a rectangular cavity with the low-Reynolds-number differential stress and flux model is presented. The primary emphasis of the study is placed on the investigation of the accuracy and numerical stability of the low-Reynolds-number differential stress and flux model for a natural convection problem. The turbulence model considered in the study is that developed by Peeters and Henkes (1992) and further refined by Dol and Hanjalic (2001), and this model is applied to the prediction of a natural convection in a rectangular cavity together with the two-layer model, the shear stress transport model and the time-scale bound ν$^2$- f model, all with an algebraic heat flux model. The computed results are compared with the experimental data commonly used for the validation of the turbulence models. It is shown that the low-Reynolds-number differential stress and flux model predicts well the mean velocity and temperature, the vertical velocity fluctuation, the Reynolds shear stress, the horizontal turbulent heat flux, the local Nusselt number and the wall shear stress, but slightly under-predicts the vertical turbulent heat flux. The performance of the ν$^2$- f model is comparable to that of the low-Reynolds-number differential stress and flux model except for the over-prediction of the horizontal turbulent heat flux. The two-layer model predicts poorly the mean vertical velocity component and under-predicts the wall shear stress and the local Nusselt number. The shear stress transport model predicts well the mean velocity, but the general performance of the shear stress transport model is nearly the same as that of the two-layer model, under-predicting the local Nusselt number and the turbulent quantities.

• 동아시아식생활학회지
• /
• 제5권2호
• /
• pp.19-26
• /
• 1995

Staphylococcus aureus, the most salt-tolerant nonhalophilic bacterium, is the only foodborne pathogen that is able to grow at a levels below 0.90. The fundamental osmorgulatory strategy used by this organism involves the accumulation of intracellular compatible solutes such as proline or glycine betaine which are accumulated by transport and act as osmoregulators in cells. In this study, levels of proline transport systems and glycine betaine transport system of S. aureus were examined when cells are grown at high osmolarity. The levels of all three transport systems within S. aureus were elevated at high osmolarity and the most dramatic increase was found for the low-affinity proline transport system. However, in 5mM glycine betaine-supplemented medium, the level of the low-affinity proline transport system did not become elevated when cultures were grown at high osmolarity. The metabolic fate of the accumulated proline and glycine getaine was investigated by thin-layer chromatography an found to be not metabolized by S. aureus.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.319.1-319.1
• /
• 2013

Solid oxide fuel cells (SOFCs) have been recognized as one of emerging renewable energy sources, due to minimized pollutant production and high efficiency in operation. The performance of SOFCs is largely dependent on the electrode polarization which involves the oxidation/reduction in cathodes and anodes along with the charge transport of ions and electronic carriers. Atomic layer deposition is based on the alternate chemical surface reaction occurring at low temperatures with high uniformity and superior step coverage. Such features can be extended into the coating of metal oxide and/or metal layer onto the porous materials. In particular, the atomic layer deposition is can manipulated in controlling the charge transport in terms of triple phase boundaries, in order to control artificially the electrochemical polarization in electrodes of SOFC. The current work applied atomic layer deposition of metal oxides intro the electrodes of SOFCs. The corresponding effect was monitored in terms of the electrochemical characterization. The roles of atomic layer deposition in solid oxide fuel cells are discussed towards optimized towards long-term durability at intermediate temperature.

• 디지털산업정보학회논문지
• /
• 제14권4호
• /
• pp.17-26
• /
• 2018

Connected car plays an important role on Intelligent Transport System (ITS). ITS is able to secure drivers' convenience and safety, however, the overall system can be threatened by hacking attempt. Blockchain is one strong candidate of the remedy to promote the security of the ITS network. However, there will be many challenges to adopt previously proposed blockchain technologies to ITS. This work presents a new ITS structure based on blockchain technology. Proposed scheme includes three major layers. The first layer is central manager which is initiated once to register a certain connected car. The third layer is RSU (Road Side Unit) layer which exploits PoS (Proof of Stake) for consortium blockchains and retains real-time information. In addition, this layer performs block expiration based on timers to maintain manageable block length. In the second layer, the generated blocks of the third layer without expiration are housed as private blockchains. We finally demonstrate possible merits of newly proposed scheme.

• 한국수산과학회지
• /
• 제37권6호
• /
• pp.511-516
• /
• 2004

As a preliminary study on the sediment flux, concentrations of suspended particulate matter and current speeds were measured at three inlets of Gwangyang Bay during one tidal cycle of a spring tide of March 2003. The suspended sediment flux rate $(g/m^{2}/s)$ at the mouth of Seomjin River (St. K1) was observed to be higher throughout surface layer during ebb tide $(14.3\;g/m^{2}/s)$ and throughout near-bottom layer during the flood tide $(23.2\;g/m^{2}/s),$ resulting in a net upstream-ward transport of$0.9{\times}10^{3}kg/m$ during 13 period. At the inlet toward Yeosu Bay (St. K2), a relatively low rate ($(5.0-6.7\;g/m^{2}/s)$ of sediment flux occurred throughout the water column compared to St. K1, with a depth-integrated net transport of $5.6{\times}10^{3}kg/m$ toward the outer reaches of Gwangyang Bay inlet. At St. K3 located at Gwangyang Bay-side of Noryang Strait, the outward flux toward the Jinju Bay was observed to be dominant during the flood tide $(16.2-23.2\;g/m^{2}/s)$, especially through the mid and near bottom layer, compared to the inward flux throughout the whole water column during the ebb tide $(13.1-19.7\;g/m^{2}/s).$ The net transport at St. K3 was calculated to be $4.0{\times}10^{3}kg/m$ toward the outside of Gwangyang Bay. The outward net transport of suspended sediment at all three inlets seems to be consistent with a trend of bottom sediment texture, which suggests a net movement of sediment from a relatively coarse and poorly sorted inner-bay toward a relatively fine and better sorted outer-bay environment.