• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2853-2858
• /
• 2013

This paper proposes the ITMS(Intelligent Transport Monitoring System) which manages the route and state of freight by using the Meteorological Office, the Transportation Management Center, GPS and Sensors, etc. The ITMS consists of the CIMS(Container Inner Monitoring System) transmitting the inner temperature and humidity of a container, the TMM(Transport Management Module) computing an estimated time of arrival with Freight Vehicle location information and transmits the result to the CIMS, the FMM(Freight Management Module) checking and managing the freight freshness by using the temperature and humidity of the collected containers, and the SMM(Stevedoring Management Module) selecting the container loading and unloading places with the information transmitted from the CIMS, the TMM, and the FMM and attaching the freight formation to containers using an RFID label. The ITMS not only checks the freight condition at intervals but also acquires and manages the freight information with RFID labels rapidly and accurately.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.2
• /
• pp.12-26
• /
• 2014

This Study deals with effect of low visibility condition at nighttime on traffic accident. Roads for experiment of this study are Gyeongbu expressway, Seohaean expressway, Yeongdong expressway and Seoul beltway in Gyeonggi province. For this study, I subdivided basic straight section of them into 58 short section. And I analyzed effect of low visibility condition by darkness at nighttime on traffic accident by using 410 traffic accidents between January 1, 2009 and June 30, 2012 on those sections. The Quasi-experimental and negative binomial regression were applied to analyze effect of low visibility condition at nighttime on traffic accident. In this study, I only analyzed visibility difference of daytime and nighttime on traffic accident except other effective variables on traffic accidents. As a result, I have found that it is for low visibility condition at nighttime to have effect on traffic accidents at such specific conditions as Los A speed is maintained in basic straight section of expressway in fine weather. And I tried to do various analysis on types and causes of traffic accidents using the result of analysis.

• 한국해양학회지
• /
• v.22 no.1
• /
• pp.25-33
• /
• 1987

The transport and fate of fine-grained, cohesive sediments in an estuary were investigated numerically. A numerical model of sediment entrainment, deposition, and transport has been developed by incorporating recent results of laboratory and field investigations. The time-dependent flow fields produced by fiver inflow and semi-diurnal tides, were calculated, and the corresponding distributions of suspended-sediment concentrations were obtained. The time-changes of sediment bed condition due to entrainment and deposition were obtained. The entrained sediments contribute initially to high sediment concentrations in the estuary basin. As the time passes, the suspended-sediment concentrations were much reduced by the seaward transport due to residual currents. The erosional and dipositional areas were appeared to be strongly dependent on the current-velocity fields and sediment properties of the estuary.

• Macromolecular Research
• /
• v.16 no.5
• /
• pp.457-466
• /
• 2008

The relation between the phase separated morphologies and their transport properties in the polymer blend membrane for direct methanol fuel cell application was studied. In order to enhance the proton conductivity and reduce the methanol crossover, sulfonated poly(arylene ether sulfone) copolymer, with a sulfonation of 60 mol% (sPAES-60), was blended with nonsulfonated poly(ether sulfone) copolymer (RH-2000, Solvay). Various morphologies were obtained by varying the drying condition and the concentration of the casting solution (10, 15, 20 wt%). The transport properties of proton and methanol molecule through the polymer blend membranes were studied according to the absorbed water. AC impedance spectroscopy was used to measure the proton conductivity and a liquid permeability measuring instrument was designed to measure the methanol permeability. The state of water in the blend membranes was confirmed by differential scanning calorimetry and was used to correlate the morphology of the membrane with the membrane transport properties.

• Journal of Pharmaceutical Investigation
• /
• v.40 no.6
• /
• pp.321-332
• /
• 2010

Growing interest in the nasal route as a drug delivery system calls for a reliable in vitro model which is crucial for efficiently evaluating drug transport through the nasal cells. Various in vitro cell culture systems has thus been developed to displace the ex vivo excised nasal tissue and in vivo animal models. Due to species difference, results from animal studies are not sufficient for estimating the drug absorption kinetics in humans. However, the difficulty in obtaining reliable human tissue source limits the use of primary culture of human nasal epithelial cells. This shortage of human nasal tissue has therefore prompted studies on the "passage" culture of nasal epithelial cells. A serially passaged primary human nasal epithelial cell monolayer system developed by the air-liquid interface (ALI) culture is known to promote the differentiation of cilia and mucin gene and maintain high TEER values. Recent studies on the in vitro nasal cell culture systems for drug transport studies are reviewed in this article.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.225-232
• /
• 2009

Infiltration of rainfall causes railway slopes to be unstable and may result in failure. Basic relationship between the rainfall and stability of railway embankment is defined to analyze its stability by rainfall. An experimental study for defining of infiltration rate of rainfall into slope is conducted in the lab. The results of Rainfall infiltration show that rainfall infiltration is not equal to infiltration as like reservoir because rate of rainfall infiltration is controlled by slope angle. Based on these results, boundary condition of rainfall is altered and various numerical analysis are performed. The variation of shear strength, the degree of saturation and pore-water pressure for railway slope during rainfall can be predicted and the safety factor of railway slope can be expressed as the function of rainfall amount, namely rainfall index. And suggested rainfall index is compared with the rail transport operation control which is used in KORAIL. It is judged that this rainfall index can be a good tool for the rail-transport operation control.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1494-1495
• /
• 2006

A complete finite element analysis method for discharge onset process, which is governed and coupled by charge transport equation and electric field equation, was presented. The charge transport equation of first order was transformed into a second-order one by utilizing the artificial diffusion scheme. The two second-order equations were analyzed by the finite element formulation which is well-developed for second-order ones. The Fowler-Nordheim injection boundary condition was adopted for charge transport equation. After verifying the numerical results by comparing to the analytic solutions using parallel plane electrodes with one carrier system, we extended the result to blade-plane electrodes in 2D xy geometry with three carriers system. Radius of the sharp tip was taken to be 50 ${\mu}m$. When this sharp geometry was solved by utilizing the space discretizing methods, the very sharp tip was found to cause a singularity in electric field and space charge distribution around the tip. To avoid these numerical difficulties in the FEM, finer meshes, a higher order shape function, and artificial diffusion scheme were employed.

• Journal of Navigation and Port Research
• /
• v.32 no.10
• /
• pp.829-835
• /
• 2008

The objective of this study is to present the two-step dispatching strategy for the purpose of the transport vehicle with multi-function used in container terminal. The two-step dispatching is a method to save the waiting time between transport vehicle and cranes using real time location control. The first step dispatching is to allocate the destination location based on the real time location information. The second step dispatching is to indicate the specific job such as loading, unloading, and pick-up based on the condition of working area. This two-step dispatching strategy decreases the waiting times of the stevedoring system and will contribute at a productivity improvement in container terminal.

• Journal of The Geomorphological Association of Korea
• /
• v.24 no.3
• /
• pp.61-81
• /
• 2017

Traditional approaches to surface moisture problems in the context of aeolian research have focused on the initiation of sand movement, developing various models for predicting threshold velocity on a wet surface. They have been unsatisfactory, however, in explaining field observations because they have not incorporated spatiotemporal variability of surface moisture, the interactions between transported sand grains and surface, and the role of aeolian transport in controlling surface moisture. As Nield (2011) showed, a simplified numerical model can be used to investigate this issue. This research aims to explore the feedback structures between aeolian transport and surface moisture using a modified sand slab model. Key modifications are the introduction of simultaneous updating scheme for all the slabs and moisture-assigning procedures with and without aeolian transport. The major findings are as follows. Moist surface conditions suppress sand slab movement, leading to the development of smaller-scale topography. Available sands for aeolian transport are determined by the vertical patterns of moisture content with its variations from groundwater to the surface. Sand patches on a wet surface act as a localized source area. Sand movement drives immediate changes in surface moisture rather than time-lag reponses, mostly when moist conditions are dominant.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.11a
• /
• pp.160-164
• /
• 1991

The effect of various parameters, such as temperature, current density and operating valtage on the performance of phosphoric acid fuel cell stack was studied by using numerical analysis. The utilization ratio of reaction gas, inlet condition of reaction air and cooling air, inlet condition of cooling air flow latin were changed regularly, The results showed good agreements with the existing results and experimental ones.