• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.131-131
• /
• 2009

Silicon Carbide (SiC) is a material with a wide bandgap (3.26eV), a high critical electric field (~2.3MV/cm), a and a high bulk electron mobility ($\sim900cm^2/Vs$). These electronic properties allow high breakdown voltage, high-speed switching capability, and high temperature operation compared to Si devices. Although various SiC DMOSFET structures have been reported so far for optimizing performances, the effect of channel dimension on the switching performance of SiC DMOSFETs has not been extensively examined. This paper studies different channel dimensons ($L_{CH}$ : $0.5{\mu}m$, $1\;{\mu}m$, $1.5\;{\mu}m$) and their effect on the the device transient characteristics. The key design parameters for SiC DMOSFETs have been optimized and a physics-based two-dimensional (2-D) mixed device and circuit simulator by Silvaco Inc. has been used to understand the relationship. with the switching characteristics. To investigate transient characteristic of the device, mixed-mode simulation has been performed, where the solution of the basic transport equations for the 2-D device structures is directly embedded into the solution procedure for the circuit equations. We observe an increase in the turn-on and turn-off time with increasing the channel length. The switching time in 4H-SiC DMOSFETs have been found to be seriously affected by the various intrinsic parasitic components, such as gate-source capacitance and channel resistance. The intrinsic parasitic components relate to the delay time required for the carrier transit from source to drain. Therefore, improvement of switching speed in 4H-SiC DMOSFETs is essential to reduce the gate-source capacitance and channel resistance.

• 한국전기전자재료학회논문지
• /
• 제27권11호
• /
• pp.718-724
• /
• 2014

In this work, in order to manufacture the photoelectrode of dye-sensitized solar cells, the different anatase $TiO_2$ paste was prepared by simple route using hydrothermal method. In comparison with the traditional preparing process, the hydrothermally synthesized $TiO_2$ gel was used to make paste directly. Thus, the making process was simplified and the solar conversion efficiency was improved. In comparison with 5.34% solar energy efficiency of HP-1 photoelectrode, the 6.23% efficiency of HDP-1 electrode was improved by 16.67%. This is because hydrothermally synthesized $TiO_2$ gel was used to make paste directly, the dispersibility between $TiO_2$ particles was improved and get the smoother network, leading to the charge transport ability of the electron generated in dye molecular was improved. Further, HDP-2 photoelectrode delivered the best results with Voc (open circuit voltage), Jsc (short circuit current density) FF (fill factor) and ${\eta}$(solar conversion efficiency) were 0.695 V, $15.81mA\;cm^{-2}$, 61.48% and 6.80%, respectively. In comparison with 5.34% of HP-1 photoelectrode, it was improved by 27.34%.

• 한국재료학회지
• /
• 제20권9호
• /
• pp.483-487
• /
• 2010

To fabricate $TiO_2$ nanoparticle-based dye sensitized solar cells (DSSCs) at a low-temperature, DSSCs were fabricated using hydropolymer and ZnO nanoparticles composites for the electron transport layer around a low-temperature ($200^{\circ}C$). ZnO nanoparticle with 20 nm and 60 nm diameter were used and Pt was deposited as a counter electrode on ITO/glass using an RF magnetron sputtering. We investigate the effect of ZnO nanoparticle concentration in hydropolymer and ZnO nanoparticle solution on the photoconversion performance of the low temperature fabricated ($200^{\circ}C$) DSSCs. Using cis-bis(isothiocyanato)bis(2,20 bipyridy1-4,40 dicarboxylato) ruthenium (II) bis-tetrabutylammonium (N719) dye as a sensitizer, the corresponding device performance and photo-physical characteristics are investigated through conventional physical characterization techniques. The effect of thickness of the ZnO photoelectrode and the morphology of the ZnO nanoparticles with the variations of hydropolymer to ZnO ratio on the photoconversion performance are also investigated. The morphology of the ZnO layer after sintering was examined using a field emission scanning electron microscope (FE-SEM). 60 nm ZnO nanoparticle DSSCs showed an incident photon-to-current conversion efficiency (IPCE) value of about 7% higher than that of 20 nm ZnO nanoparticle DSSCs. The maximum parameters of the short circuit current density ($J_{sc}$), the open circuit potential ($V_{oc}$), fill factor (ff), and efficiency ($\eta$) in the 60 nm ZnO nanoparticle-based DSSC devices were 4.93 mA/$cm^2$, 0.56V, 0.40, and 1.12%, respectively.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.69-70
• /
• 2006

In lithium-ion batteries, separator membrane's, main role is to physically isolate a cathode and an anode while maintaining rapid transport of ionic charge carriers during the passage of electric current. As far as battery safety is concerned, the electrical isolation of electrodes is most crucial since unexpected short-circuits across the membrane induces hot spots where thermal runaway may break out. Internal short-circuits are generally believed to occur by protrusions on the electrode surface either by unavoidable deposits of metallic impurities or by dendritic lithium growth during battery operation. Another cause is shrinkage of the separator membrane when exposed to heat. If separator membrane can be engineered to prevent the internal short-circuit, it will not be difficult to improve lithium-ion batteries' safety. Commonly the separators employed in lithium-ion batteries are made of polyethylene (PE) and/or polypropylene (PP). These materials have terrible limitations in preventing the fore-mentioned internal short-circuit between electrodes due to their poor dimensional stability and mechanical strength. In this study we have developed a novel separator membrane that possesses very high thermal and mechanical stability. The cells employing this separator provided noticeable safety improvement in the various abuse tests.

• 전기전자학회논문지
• /
• 제22권2호
• /
• pp.420-426
• /
• 2018

가까운 미래에, 전자의 ballastic 혹은 near-ballastic 이동이 가능한 CNT(Carbon NanoTube)를 활용한 CNTFET(Carbon NanoTube Field Effect Transistor)은 현재의 실리콘 기반 트랜지스터를 교체할 유력한 후보 중 하나로 고려되고 있다. 고성능의 CNTFET으로 대규모 집적회로를 구현하기 위해서는 semiconducting CNT가 CNTFET 안에 동일한 간격과 높은 밀도로 정렬되어 배치되어야 하지만, CNTFET 공정의 미성숙으로, CNTFET 안의 CNT는 불규칙하게 배치하게 되고, 현존하는 HSPICE 라이브러리 파일은 불규칙한 CNT 배치에 의한 성능의 변화를 회로 레벨에서 평가할 수 있는 기능을 지원하지 않는다. 이러한 성능의 변화를 평가하기 위해서 선형 프로그래밍을 활용한 방법이 과거에 제안되었으나, CNTFET의 전류와 게이트 커패시턴스를 계산하는 과정에서 오차가 발생할 수 있는 문제점이 있다. 본 논문에서는 언급한 오차가 발생되는 이유에 대해서 자세히 논하고, 이 오차를 줄일 수 있는 새로운 방법을 제시하고자 한다. 시뮬레이션 검토 결과, 새롭게 제시된 방법이 기존 방법의 오차, 7.096%를 3.15%까지 줄일 수 있음을 보이고 있다.

• 한국광학회지
• /
• 제27권6호
• /
• pp.212-217
• /
• 2016

연결 지향적 데이터 경로 서비스는 운영중인 데이터 경로에 문제가 생겼을 경우, 이의 인지와 변경을 제한된 시간 내에 끝내야 한다. 서비스 중인 데이터 경로에 이상이 있을 경우 계속해서 데이터 유실이 발생하기 때문에, 경로 서비스를 제공하는 데이터 스위칭 시스템은 문제의 경로를 신속하게 정상 경로로 전환해야 한다. 시스템의 신속한 경로 전환을 위해서는 문제 (이벤트)의 인지와 공유와 처리 과정이 신속하게 끝나야 한다. 본 논문에서는 테라비트 광-회선-패킷 통합 스위칭 시스템에서 시간결정성 높은 이벤트 공유를 위한 제어프로세서 사이의 메시징 방법을 제안한다. 제안한 방법은 서비스 실행 중에 이벤트 공유를 단순화하고 이벤트 데이터에 의한 시간 가변성을 최소화하여, 글로벌 이벤트 처리의 지연 시간을 줄이고 시간결정성을 향상시킨다. 경로 이벤트 처리에 제안한 방법을 사용할 때, 738개의 경로 전환에서 일반적인 방법보다 최대 40% 의 지연 시간 감소 효과가 있다.

• Current Photovoltaic Research
• /
• 제10권2호
• /
• pp.33-38
• /
• 2022

Planner configuration thin film solar cells (TFSCs) with SnS/CdS heterojunction performed a lower short-circuit current (J_SC). In this study, we have demonstrated a path to overcome deficiency in J_SC by the incorporation of Se in the SnS absorber. We carried out the incorporation of Se in VTD grown SnS absorber by rapid thermal annealing (RTA). The diffusion of Se is mostly governed by RTA temperature (T_RTA), also it is observed that film structure changes from cube-like to plate-like structure with T_RTA. The maximum J_SC of 23.1 mA cm^-2 was observed for 400℃ with an open-circuit voltage (V_OC) of 0.140 V for the same temperature. The highest performance of 2.21% with J_SC of 18.6 mA cm^-2, V_OC of 0.290 V, and fill factor (FF) of 40.9% is observed for a T_RTA of 300℃. In the end, we compare the device performance of Se- incorporated SnS absorber with pristine SnS absorber material, increment in J_SC is approximately 80% while a loss in V_OC of about 20% has been observed.

• Journal of Ginseng Research
• /
• 제45권1호
• /
• pp.66-74
• /
• 2021

Background: Abnormal chloride (Cl-) transport has a detrimental impact on mucociliary clearance in both cystic fibrosis (CF) and non-CF chronic rhinosinusitis. Ginseng is a medicinal plant noted to have anti-inflammatory and antimicrobial properties. The present study aims to assess the capability of red ginseng aqueous extract (RGAE) to promote transepithelial Cl- secretion in nasal epithelium. Methods: Primary murine nasal septal epithelial (MNSE) [wild-type (WT) and transgenic CFTR-/-], fisher-rat-thyroid (FRT) cells expressing human WT CFTR, and TMEM16A-expressing human embryonic kidney cultures were utilized for the present experiments. Ciliary beat frequency (CBF) and airway surface liquid (ASL) depth measurements were performed using micro-optical coherence tomography (μOCT). Mechanisms underlying transepithelial Cl- transport were determined using pharmacologic manipulation in Ussing chambers and whole-cell patch clamp analysis. Results: RGAE (at 30㎍/mL of ginsenosides) significantly increased Cl- transport [measured as change in short-circuit current (ΔISC = ㎂/㎠)] when compared with control in WT and CFTR-/- MNSE (WT vs control = 49.8±2.6 vs 0.1+/-0.2, CFTR-/- = 33.5±1.5 vs 0.2±0.3, p < 0.0001). In FRT cells, the CFTR-mediated ΔISC attributed to RGAE was small (6.8 ± 2.5 vs control, 0.03 ± 0.01, p < 0.05). In patch clamp, TMEM16A-mediated currents were markedly improved with co-administration of RGAE and uridine 5-triphosphate (8406.3 +/- 807.7 pA) over uridine 5-triphosphate (3524.1 +/- 292.4 pA) or RGAE alone (465.2 +/- 90.7 pA) (p < 0.0001). ASL and CBF were significantly greater with RGAE (6.2+/-0.3 ㎛ vs control, 3.9+/-0.09 ㎛; 10.4+/-0.3 Hz vs control, 7.3 ± 0.2 Hz; p < 0.0001) in MNSE. Conclusion: RGAE augments ASL depth and CBF by stimulating Cl- secretion through CaCC, which suggests therapeutic potential in both CF and non-CF chronic rhinosinusitis.

• 멤브레인
• /
• 제34권1호
• /
• pp.58-69
• /
• 2024

역전기투석(reverse electrodialysis, RED)은 해수와 담수의 농도 차로부터 에너지를 얻는 이온교환막을 이용한 전기막 공정이다. 해수와 담수에 포함된 다가 이온은 이온교환막의 고정 전하 그룹에 강하게 결합하여 높은 저항을 유발하며 uphill transport를 통해 개방회로 전압과 전력 밀도를 저하시킬 수 있다. 본 연구에서는 RED 응용을 위해 1가 이온 선택성 및 전기화학적 특성이 우수한 세공충진 음이온교환막(pore-filled anion-exchange membrane, PFAEM)을 제조하였다. 제조된 막의 1가 이온 선택성은 3.65였으며 동일 조건에서 1.27의 선택성을 갖는 상용막(ASE, Astom Corp.)보다 우수한 수준을 나타내었다. 또한 제조된 막은 ASE 대비 낮은 전기적 저항 등 우수한 전기화학적 특성을 나타내었다. 0.459 M NaCl/0.0510 M Na₂SO₄의 해수와 0.0153 M NaCl/0.0017 M Na₂SO₄의 담수 조건에서 RED 성능을 평가한 결과 제조된 막을 적용하여 1.80 W/m²의 최대 전력 밀도를 얻었으며 이는 ASE 막 대비 40.6% 향상된 출력 성능이었다.

• Journal of Electrical Engineering and Technology
• /
• 제10권1호
• /
• pp.75-82
• /
• 2015

This paper presents a new technique for enhancing power quality by reducing harmonics in the neutral conductor. Three-Phase Four-Wire (3P4W) system is commonly used where single and three phase loads are connected to Point of Common Coupling (PCC). Due to unbalance loads, the 3P4W distribution system becomes unbalance and current flows in the neutral conductor. If loads are non-linear, then the harmonic content of current will flow in neutral conductor. The neutral current that may flow towards transformer neutral point is compensated by using a series active filter. In order to reduce the harmonic content, the series active filter is connected in series with the neutral conductor by which neutral and phase current harmonics are reduced significantly. In this paper, solar PV based inverter circuit is proposed for compensating neutral current harmonics. The simulation is carried out in MATLAB/SIMULINK and also an experimental setup is developed to verify the effectiveness of the proposed method.