• Journal of the Society of Disaster Information
• /
• v.16 no.2
• /
• pp.310-317
• /
• 2020

Purpose: In this study, the characteristics of hazardous chemical transport vehicle accidents during the last six years from 2014 to 2019 was analyzed. This study is to prevent chemical transport accidents. Method: Using statistics from the Ministry of Environment, chemical transport vehicle accidents were classified into accident type, accident cause and vehicle type. Result: Of the total 506 cases chemical accidents, 105 cases were caused by transport vehicle. More than 20 percent of total accidents were reported. Most of the accidents were caused by spill·leak. The main causes of the accident were traffic accidents(49 cases) and management negligence(29 cases). This was more than 74% of all transport vehicle accidents. By vehicle type, 57 cases(54%) were most common in tank lorries, followed by trucks (39 cases, 37%) and trailers (9 cases, 9%). Conclusion: In order to prevent accident of transport vehicle, thorough inspection of the transport vehicle is required and safe operation of the driver. In addition, the government needs to expand real-time monitoring of transport vehicles and comprehensively manage different systems by the relevant ministries.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.616-624
• /
• 2020

This study analyzed the association between the type of transport accident and the associated mortality of elderly inpatients. The findings will contribute to the development and establishment of a systematic and effective policy according to the type of transport accident to reduce the mortality of inpatients. The data on elderly inpatients with transport accidents was extracted from the 2013-2017 Korean National Hospital Discharge In-depth Survey dataset. The data was analyzed by descriptive statistics analysis, chi-square tests and multiple logistic regression analysis. After adjustment for sociodemographic, disease, injury and policy factors, the elderly inpatient deaths due to transport accidents were significantly higher for pedestrian accidents (OR: 2.522 95%, CI: 1.291-4.972), bicycle/cart accidents (OR: 2.809, 95% CI: 1.328-5.942) and motorcycle accidents (OR: 2.330, 95% CI: 1.226-4.819) rather than that for car accidents. Likewise, elderly inpatients have a higher risk of death from other types of transport accidents than those caused by car accidents. However, Korean policies related to transport accidents of elderly inpatients are concentrated on car accidents. Effective policy is needed according to the characteristics of each type of transport accident to reduce the transport accident mortality of elderly inpatients.

• Journal of the Korean Society of Safety
• /
• v.5 no.3
• /
• pp.56-62
• /
• 1990

This study is conducted to analyze exact causes of occupational fatalities and results are as follows ： 1) The number of fatalities in establislment which employed less than 50 workers is 605(40.1％ ). Age of sixties and seventies is occupied by 10 percent with there being old-aged trend. Fatal workers who were employed less than 3 months are 39.5 percent and fatal workers who were employed more than 10 years are 11.9 percent. Safety training is necessary for newly recruited and long employed workers. 2) Accident type is, in sequence, fall from elevation, traffic accident, disease, contact with electric current, and hazardous condition is, in order, inadequate guard, hazardous method or procedure, public hazard, and agency of accident is, in sequence, temporary structure/building/structure, powered transport vehicle, passenger vehicle, hoisting or lifting apparatus, and unsafe act is, in order, driving error, failure to secure or warn. 3) The results of cross-tabulation for hazardous condition and accident type is, in sequence, traffic accident by public hazard, fall from elevation by hazardous method or procedure, fall from elevation as well as contact with elctric current by inadequate guard. The result of cross-tabulation for agency of accident and accident type is, in order, fall from elevation by temporary structure/building/structure, traffic accident of passenger vehicle and powered transport vehicle, contact with electric apparatus. The result of cross-tabulation for agency of accident and hazardous condition is, in sequence, public hazard of passenger vehicle, hazardous method or procedure of temporary structure/building/structure, publit hazard of powered transport vehicle, inadequate guard of temporary structure/building/structure. The result of cross-tabulation for unsafe act and accident type is, in sequence, traffic accident by driving error, fall from elevation by inattention to footing or surrounding, contact with electric current by secure or warn.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.2
• /
• pp.75-86
• /
• 2010

The objective of this study is to suggest the process and method of local accident investigation for local authorities with a view to efficient and effective managing traffic accidents. With a project city selected accident-type maps, accident lists, accident diagrams, priority of black-spots/-lengths, site visits, remedial measures, opportunity costs, monitoring etc. are taken into consideration, by using accident data in the last 3 years. Analyzed are accident savings to be expected when applying technical, organizational, and administrative processes attached to local accident investigation.

• Fire Science and Engineering
• /
• v.30 no.6
• /
• pp.23-30
• /
• 2016

This study analyzed the characteristics of chemical accidents, including the accidents occurring each year according to status, type of accident, accident cause for chemical substance transporting accidents. The major aim of this study was to provide information on the chemical accidents that occurred involving chemical substance transporting accidents from 2013 to July - 2016. The total incidence of chemical transporting accidents was 77 cases; 74 cases occurred by the spill & leakage type. The main cause of the accidents analyzed was traffic accidents (41 cases). Forty-six accidents were related to hazardous chemical substances. Among the 46 hazardous chemical substances involved in transporting chemical accidents, 46% of the accident substances were hydrogen chloride. For the prevention and response to accidents occurring during the transportation of chemicals, it is necessary to complement the precautions for chemical accidents caused by transportation accidents and chemical spills and leaks of chemicals. In addition, when the chemical transport of an accident occurs, it is necessary to apply a chemical transport safety system for chemical transfer.

• Journal of Radiation Protection and Research
• /
• v.28 no.4
• /
• pp.291-298
• /
• 2003

The KN-12 transport cask has been designed to transport 12 PWR spent nuclear fuel assemblies and to comply with the regulatory requirements for a Type B(U) package. The containment boundary of the cask is defined by a cask body, a cask lid, lid bolts with nuts, O-ring seals and a bolted closure lid. The containment vessel for the cask consists of a forged thick-walled carbon steel cylindrical body with an integrally-welded carbon steel bottom and is closed by a lid made of stainless steel, which is fastened to the cask body by lid bolts with nuts and sealed by double elastomer O-rings. In the cask lid an opening is closed by a plug with an O-ring seal and covered by the bolted closure lid sealed with an O-ring. The cask must maintain a radioactivity release rate of not more than the regulatory limit for normal transport conditions and for hypothetical accident conditions, as required by the related regulations. The containment requirements of the cask are satisfied by maintaining a maximum air reference leak rate of $2.7{\times}10^{-4}ref.cm^3s^{-1}$ or a helium leak rate of $3.3{\times}10^{-4}cm^3s^{-1}$ for normal transport conditions and for hypothetical accident conditions.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.6
• /
• pp.36-56
• /
• 2022

Traffic accidents occur in Korea are calculated with the 「Automobile Accident Negligence Ratio Certification Standard」 prepared by the 'General Insurance Association of Korea' and the insurance company's agreement or judgment is made. However, disputes are frequently occurring in calculating the negligence ratio. Therefore, it is thought that a more effective response would be possible if accident type according to the standard could be quickly identified using traffic accident information prepared by police. Therefore, this study aims to develop a model that learns the accident information prepared by the police and classifies it to match the accident type in the standard. In particular, through data mining, keywords necessary to classify the accident types of the standard were extracted from the accident data of the police. Then, models were developed to derive the types of accidents by learning the extracted keywords through decision trees and random forest models.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.1
• /
• pp.127-136
• /
• 2008

In these days, frequency of constructions on e freeway are increasing according as growing of the importance of e road maintenance and the road management. Work zone on the freeway where vehicles pass with high speed needs control method of lane closure and construction equipment. Because there are seldom researches in domestic study about reflecting characteristics of domestic road, sometimes we have applied for foreign cases to our traffic circumstance but it is not proper to apply for standard of other countries in our cases. foreign nation has different country square, condition of road, and level of people mind. Therefore, this study shows traffic accident characteristics in freeway work zones in Korea. At first, this study collected traffic accident data which include for 3 years $2003{\sim}2005$ in the whole freeway in Korea and then divided the data to five parts - level of the accident, type of the construction work, type of the accident, reason of the accident, according to geometric. According to comparing with non-work zones accident, this study found traffic accident characteristics in freeway work zones in Korea and suggested some alternative ideas for safety of work zones.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.4
• /
• pp.370-377
• /
• 2009

A simple preliminary analysis is often useful to check a validity of design alternatives before the detailed analysis phase in the viewpoint of efficiency. This paper describes a preliminary analysis procedure for the selection among basket design candidates for the spent fuel shipping cask of Korean standard nuclear power plant. As the cask should maintain the structural integrity in hypothetical accident condition, the case of 9 m drop is significantly considered as the worst scenario among the accident conditions in structural design viewpoint in this paper. As basket design options, totally four different types are considered and analyzed in the point of structural integrity at drop impact and weldability for fabrication. As a result, an insertion round plate type with densely spaced supports turns out to be the best in both of the viewpoints, though the weld plate type shows a bit more design margin.

• Nuclear Engineering and Technology
• /
• v.34 no.3
• /
• pp.187-201
• /
• 2002

The KN-12 cask is designed to transport 12 PWR spent nuclear fuels and to comply with the requirements of Korea Atomic Energy Act, IAEA Safety Standards Series No.57-1 and US 10 CFR Part 71 for a Type B(U)F package. It provides containment, radiation shielding, structural integrity, criticality control and heat removal for normal transport and hypothetical accident conditions. W.H 14$\times$14, 16$\times$16 and 17$\times$17 fuel assemblies with maximum allowable initial enrichment of 5.0 wt.%, maximum average burn-up of 50,000 MWD/MTU and minimum cooling time of 7 years being used in Korea will be loaded and subsequently transported under dry and wet conditions. A forged cylindrical cask body which constitutes the containment vessel is closed by a cask lid. Polyethylene rods for neutron shielding are arranged in two rows of longitudinal bore holes in the cask body wall. A fuel basket to accommodate up to 12 PWR fuel assemblies provides support of the fuels, control of criticality and a path to dissipate heat. Impact limiters to absorb the impact energy under the hypothetical accident conditions are attacked at the top and at the bottom side of the cask during transport. Handling weight loaded with water is 74.8 tons and transport weight loaded with water with the impact limiters is 84.3 tons. The cask will be licensed in accordance with Korea Atomic Energy Act 3nd fabricated in Korea in accordance with ASME B&PV Code Section 111, Division 3.