• 대한기계학회논문집A
• /
• 제22권4호
• /
• pp.826-833
• /
• 1998

The energy-absorbing characteristic of impact limiters affects the cask design so significantly that it should be evaluated as accurate as possible. The objective of this study is to find the influence of the impact limiter's steel case and gusset plates which enclose the shock absorbing cellular material on the impact energy absorption. The influence of impact limiter's steel case and gusset plate stiffeners on the impact energy absorption behavior under horizontal drop impact was evaluated for a radioactive isotope transport cask. Though the impact limiters mitigate the impact damage of the cask, the impact limiter's steel case and gusset plate stiffeners increase the impact force so significantly that should be designed as soft as possible. The impact analysis without considering impact limiter's steel case and gusset plates stiffener gives non-conservative results, so the stiffness of the steel case and gusset plates should be considered in impact analysis.

• Nuclear Engineering and Technology
• /
• 제48권3호
• /
• pp.624-634
• /
• 2016

Nuclear criticality safety analyses (NCSAs) considering burnup credit were performed for the GBC-32 cask. The used nuclear fuel assemblies (UNFAs) discharged from Hanbit Nuclear Power Plant Unit 3 Cycle 6 were loaded into the cask. Their axial burnup distributions and average discharge burnups were evaluated using the DeCART and Multi-purpose Analyzer for Static and Transient Effects of Reactors (MASTER) codes, and NCSAs were performed using SCALE 6.1/STandardized Analysis of Reactivity for Burnup Credit using SCALE (STARBUCS) and Monte Carlo N-Particle transport code, version 6 (MCNP 6). The axial burnup distributions were determined for 20 UNFAs with various initial enrichments and burnups, which were applied to the criticality analysis for the cask system. The UNFAs for 20- and 30-year cooling times were assumed to be stored in the cask. The criticality analyses indicated that $k_{eff}$ values for UNFAs with nonuniform axial burnup distributions were larger than those with a uniform distribution, that is, the end effects were positive but much smaller than those with the reference distribution. The axial burnup distributions for 20 UNFAs had shapes that were more symmetrical with a less steep gradient in the upper region than the reference ones of the United States Department of Energy. These differences in the axial burnup distributions resulted in a significant reduction in end effects compared with the reference.

• Nuclear Engineering and Technology
• /
• 제54권11호
• /
• pp.4030-4048
• /
• 2022

In this study, road transportation tests were conducted with surrogate fuel assemblies under normal conditions of transport to evaluate the vibration and shock load characteristics of spent nuclear fuel (SNF). The overall test data analysis was conducted based on the measured acceleration and strain data obtained from the speed bump, lane-change, deceleration, obstacle avoidance, and circular tests. Furthermore, representative shock response spectrums and power spectral densities of each test mode were acquired. Amplification or attenuation characteristics were investigated according to the load transfer path. The load attenuated significantly as it transferred from the trailer to the cask. By contrast, the load amplified as it transferred from the cask to the surrogate SNF assembly. The fuel loading location on the cask disk assembly did not exhibit a significant influence on the strain measured from the fuel rods. The principal strain was in the vertical direction, and relatively large strain values were obtained in spans with large spacing between spacer grids. The influence of the lateral location of fuel rods was also investigated. The fuel rods located at the side exhibited relatively large strain values than those located at the center. Based on the strain data obtained from the test results, a hypothetical road transportation scenario was established. A fatigue evaluation of the SNF rod was performed based on this scenario. The evaluation results indicate that no fatigue damage occurred on the fuel rods.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(2)
• /
• pp.847-852
• /
• 1995

A shielding analysis for KSC-7, the shipping cask for transporting the 7 PWR spent fuel assemblies, has been carried out. Radiation source term has been calculated on spent fuel with burnup of 50,000 MWD/MTU and 1.5 years cooling time by ORIGEN2 code. The shielding calculation for the cask has been made by using MCNP4A code with continuous cross section data library from ENDF/B-V. As a result of neutron dose rate analysis, another shielding calculational model on spent fuel shipping cask was provided which is using the Monte Carlo method.

• 한국압력기기공학회 논문집
• /
• 제18권2호
• /
• pp.43-49
• /
• 2022

The purpose of this study is to evaluate the radiation effect on damage when the external shield of the spent nuclear fuel transport cask is damaged due to impact as the cause of an unexpected accident. The neutron and gamma-ray intensities and spectra are calculated using the ORIGEN-Arp module in the SCALE 6.2.4 code package⁽¹⁾ and then using MCNP6.2⁽²⁾ code calculate the dose rate. In order to evaluate the radiation dose according to the size of damage caused by external impact, various sized holes of 0.3~13.7% are assumed in the outer shield of the cask to evaluate the sensitivity to the dose. In the case of radiation source leakage, damage to the nuclear fuel assembly is assumed to be up to 6% based on overseas test cases. When only the outer shield is damaged, the maximum surface dose is calculated as 3.12E+03 mSv/hr. However, if the radiation source is leaked due to damage to the nuclear fuel assembly, it becomes 7.00E+05 mSv/hr which is about 200 times greater than the former case.

• Journal of Radiation Protection and Research
• /
• 제18권2호
• /
• pp.27-35
• /
• 1993

중수로형 원자로에서 방출되는 사용후핵연료 다발을 안전하게 운반할 목적으로 CANDU 수송용기에 대한 방사선차폐해석을 수행하였다. 핵연료의 연소도는 7,800MWD/MTU, 냉각기간은 5년으로 하여 ORIGEN2 코드로 방사선원을 구하고 이것으로 핵연료 378다발을 운반할 수 있는 수송용기의 차폐체 두께변화에 따른 선량을 영향을 비교하였다. 계산은 ANISN과 DOT4.2 코드를 사용하였으며, 해석결과 최적의 차폐구조를 선정 하였으며, 또한 IAEA 및 국내 원자력법의 수송법규에 명시된 정상수송 및 가상사고조건에 따른 차폐해석을 수행하여 CANDU 수송용기의 안전성을 입증하였다.

• Nuclear Engineering and Technology
• /
• 제20권1호
• /
• pp.65-70
• /
• 1988

PWR사용 후 핵연료 집합체 4개를 장전한 수 있는 납/Resin차폐체형 수송용기에 대한 방사선 차폐해석을 수행하였다. 이때 차폐효과를 유지하면서도 전체중량이 최소화되도록 차폐재를 선택하였다. 방사선윈은 ORIGEN 전산코드로 계산하여 얻었으며, 사용후 핵연료의 연소도를 38,000 MWD/MTU 그리고 냉각기간을 3년으로 가정하였다. 수송용기의 외부 표면에서 1m거리에서 나타나는 감마선 그리고 중성자의 선량율은 ANISN전산코드로 계산하여 얻었다. 계산된 총방사선 선량율은 정상 및 가상 사고조건하에서도 국내 법규에 규정된 기준치 이내에서 만족하는 것으로 나타났다.

• Nuclear Engineering and Technology
• /
• 제55권9호
• /
• pp.3506-3513
• /
• 2023

In this paper, we demonstrate the neutron attenuation of dry cask shielding materials using the S670e helium-4 detector manufactured by Arktis Radiation Ltd. In particular, two materials expected to be applied to the TN-32 dry cask manufactured by ORANO Korea and KORAD-21 by the Korea Radioactive Waste Agency (KORAD) were utilized. The measured neutron attenuation was compared with our Monte Carlo N-Particle Transport simulation results, and the difference is given as the root mean square (RMS). For the fast neutron case, a rapid decline in neutron counts was observed as a function of increasing material thickness, exhibiting an exponential relationship. The discrepancy between the experimentally acquired data and simulation results for the fast neutron was maintained within a 2.3% RMS. In contrast, the observed thermal neutron count demonstrated an initial rise, attained a maximum value, and exhibited an exponential decline as a function of increasing thickness. In particular, the discrepancy between the measured and simulated peak locations for thermal neutrons displayed an RMS deviation of approximately 17.3-22.4%. Finally, the results suggest that a minimum thickness of 5 cm for Li-6 is necessary to achieve a sufficiently significant cross-section, effectively capturing incoming thermal neutrons within the dry cask.

• 방사성폐기물학회지
• /
• 제4권1호
• /
• pp.51-58
• /
• 2006

고리 원전 사용후핵연료 저장조의 저장용량을 확보하기 위하여 2002년부터 사용후핵연료 운반용기를 이용하여 400다발 이상의 PWR 사용후핵연료 집합체를 원전부지 내에 수송, 저장하였다. 이를 위하여 KN-12 운반용기, 관련장비 및 수송차량으로 구성되는 수송시스템을 구성하였다. KN-12 운반용기는 국내 원자력법 및 IAEA의 수송규정에 따라 설계, 제작되고, 정부로부터 인허가를 획득하였으며, 취급장비 역시 관련규정에 따라 구비하였다. 수송 저장작업은 2 대의 운반용기를 동시에 투입하여 수행하였으며, 모든 작업공정에 대하여 엄격한 품질관리 및 방사선 안전관리를 수행하여 수송 안전성을 확보하고 신뢰도를 제고하였다.

• Nuclear Engineering and Technology
• /
• 제25권2호
• /
• pp.248-254
• /
• 1993

본 연구에서는 법규에서 규정하고 있는 주변온도 38$^{\circ}C$의 정상수송조건하에서 수송용기의 건식수송조건에 대한 열해석을 평가하였다. 수송용기는 1회에 PWR 핵연료집합체 4개를 운반할 수 있는 용량을 가지며, 설계기준 핵연료는 연소도 38,000 MWD/MTU, 냉각기간 3년을 기준으로 하였다. 건식수송조건에 대한 열해석을 평가하기 위하여 COBRA-SFS 전산코드를 이용하였다. 수송용기 내부 cavity에 공기, 질소 및 헬륨가스를 채우는 세가지 조건에 대한 해석을 수행하였으며, 최대 핵연료봉의 온도는 수송용기 내부 cavity가 공기인 경우에는 277$^{\circ}C$, 헬륨인 경우에는 226$^{\circ}C$로 계산되었다. 이 값은 건식수송조건에서 수송용기 내부에 장전된 PWR 핵연료집합체가 열적으로 건전성을 유지하기 위한 규정온도보다 낮은 것으로 나타났다.