• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.137-137
• /
• 2009

Thin-film transistors (TFTs) that can be prepared at low temperatures have attracted much attention due to the great potential for flexible electronics. One of the mainstreams in this field is the use of organic semiconductors such as pentacene. But device performance of the organic TFTs is still limited by low field effect mobility or rapidly degraded after exposing to air in many cases. Another approach is amorphous oxide semiconductors. Amorphous oxide semiconductors (AOSs) have exactly attracted considerable attention because AOSs were fabricated at room temperature and used lots of application such as flexible display, electronic paper, large solar cells. Among the various AOSs, a-IGZO was considerable material because it has high mobility and uniform surface and good transparent. The high mobility is attributed to the result of the overlap of spherical s-orbital of the heavy pest-transition metal cations. This study is demonstrated the effect of thickness channel layer from 30nm to 200nm. when the thickness was increased, turn on voltage and subthreshold swing were decreased. a-IGZO TFTs have used a shadow mask to deposit channel and source/drain(S/D). a-IGZO were deposited on SiO2 wafer by rf magnetron sputtering. using power is 150W, working pressure is 3m Torr, and an O2/Ar(2/28 SCCM) atmosphere at room temperature. The electrodes were formed with Electron-beam evaporated Ti(30nm) and Au(70nm) structure. Finally, Al(150nm) as a gate metal was evaporated. TFT devices were heat treated in a furnace at $250^{\circ}C$ in nitrogen atmosphere for an hour. The electrical properties of the TFTs were measured using a probe-station to measure I-V characteristic. TFT whose thickness was 150nm exhibits a good subthreshold swing(S) of 0.72 V/decade and high on-off ratio of 1E+08. Field effect mobility, saturation effect mobility, and threshold voltage were evaluated 7.2, 5.8, 8V respectively.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.1
• /
• pp.17-22
• /
• 2011

ZnO-based thin-film transistors (TFTs) have been fabricated and the mechanical characteristics of electric circuits, such as stress, strain, and deformation are analyzed by the finite element method (FEM). In this study, a mechanical-stability design guide for such systems is proposed; this design takes into account the stress and deformation of the bridge to estimate the stress distribution in an $SiO_2$ film with 0 to 5% stretched on 0.5-${\mu}m$-thick. The predicted buckle amplitude of $SiO_2$ bridges agrees well with experimental results within 0.5% error. The stress and strain at the contact point between bridges and a pad were measured in a previous structural analysis. These structural analysis suggest that the numerical measurement of deformation, SU-8 coating thickness for Neutral Mechanical Plane (NMP) and ITO electrode size on a dielectric layer was useful in enhancing the structural and electrical stabilities.

• Applied Chemistry for Engineering
• /
• v.19 no.1
• /
• pp.37-44
• /
• 2008

The multi-layer PET film of ITO/ATO was prepared by a wet coating method to obtain the transparent film with a high conductance at low cost. ITO nano-particles were synthesized by a SAS method at 15 MPa and $50^{\circ}C$, where optimized rate of In/Sn was 65. Average diameter and resistivity of ITO obtained from SAS are $15{\pm}2nm$ and $4{\times}10^4{\Omega}{\cdot}cm$. Coating solution was prepared at pH 10. Roughness (Ra), resistivity, and transmissivity of ATO film on PET are 9 nm, $5.5{\times}10^6{\Omega}{\cdot}cm$, and 91%. The multi-layered film of ITO/ATO was obtained by solution including 0.1, 0.5, 1.0, and 2.0 ITO wt% on ATO layer. Roughness (Ra) of multi-layered film with 0.1, 0.5, 1.0, and 2.0 ITO wt% is 4, 10, 12, and 16 nm, respectively. Corresponding resistivity with an increasing ITO concentration is $3.7{\times}10^6$, $2.4{\times}10^6$, $8{\times}10^5$, and $2{\times}10^5{\Omega}{\cdot}cm$. Transmissivity of ITO/ATO film decreases as 89, 88, 86, and 82% with an increasing ITO concentration as 0.1, 0.5, 1.0, and 2.0 wt%.

• Journal of Conservation Science
• /
• v.21
• /
• pp.73-88
• /
• 2007

In this paper, the interaction between five biocides(commercial) and two ethylsilicate consolidants for stone monuments, reacted in different sequence, has been studied. Through the structures, weight and gelation time of mixture of biocides and consolidants have been evaluated the reactivity of biocide alone, the reactivity of consolidants and biocides, the reactivity of consolidants and dried biocide, and the reactivity of ethylsilicate gel and biocides. The tested biocides show quite different properties from those of consolidants; after evaporation, some biocides are remained white salt crystals, another need the long time for evaporation and one biocide shows pale brown color. The results have shown an interaction of the tested products each other in some application sequences of the products. When the application of liquid state biocides with consolidants, it was noted that some biocide seem to interfere with the formation of gel due to reaction of consolidants and water and salts in biocides. In the reaction of ethylsilicate with dried biocides have shown a heterogenous gel(transparent layer with ethylsilicate alone and white layer which is mixed biocide and ethylsilicate) and many cracks in product due to the different shrinkage, thus the products don't play a role as consolidants. There is no change in structures and color in reaction of the gas state biocide and ethylsilicate gel.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.420-424
• /
• 2016

In this study, we developed photocatalytic technology to address the emerging serious problem of air pollution through indoor air cleaning. A single layer of $WO_3$ was prepared by using the dry process of general RF magnetron sputtering. At a base vacuum of $1.8{\times}10^{-6}$[Torr], the optical and electrical properties of the resulting thin films were examined for use as a transparent electrode as well as a photocatalyst. The single layer of $WO_3$ prepared at an RF power of 100 [W], a pressure of 7 [mTorr] and Ar and $O_2$ gas flow rates of 70 and 2 sccm, respectively, showed uniform and good optical transmittance of over 80% in the visible wavelength range from 380 [nm] to 780 [nm]. The optical catalyst characteristics of the $WO_3$ thin film were examined by investigating the optical absorbance and concentration variance in methylene blue, where the $WO_3$ thin film was immersed in the methylene blue. The catalytic characteristics improved with time. The concentration of methylene blue decreased to 80% after 5 hours, which confirms that the $WO_3$ thin film shows the characteristics of an optical catalyst. Using the reflector of a CCFL (cold cathode fluorescent lamp) and the lens of an LED (lighting emitting diode), it is possible to enhance the air cleaning effect of next-generation light sources.

• Restorative Dentistry and Endodontics
• /
• v.25 no.4
• /
• pp.575-586
• /
• 2000

In this study, adaptation of compomer to saliva contaminated dentin was evaluated with scanning electron microscope(SEM) and confocal laser scanning microscope(CLSM). For the SEM study, the occulusal surfaces of thirty two molar teeth were grounded to exposure dentin surfaces. The specimen were randomly assigned to control and three experimental groups with four samples in each group. In control group, Dyract and F-2000 compomer were bonded on the specimens according to the manufactures direction. Experimental groups were subdivided into three groups. They were contaminated with saliva on dentin surfaces ; Experimental group 1 : Saliva was dried with compressed air. Experimental group 2 : Saliva was rinsed with air-water spray and dried. Experimental group 3 : After polymerization of an adhesive, they were contaminated with saliva, and then saliva was rinsed with air-water spray and dried. Dyract and F-2000 compomer were bonded on saliva-treated dentin surfaces. The interfaces between dentin and compomer were observed with SEM. For the CLSM study, Class V cavities were prepared in buccal and ligual surfacess of thirty two molars. The specimens were divided into control and experimental groups. Class V cavities in experimental group were contaminated with saliva and those surfaces in each experimental groups received the same treatments as for the SEM study. Cavities were applied Prime & Bond 2.1 and F-2000 compomer primer/adhesive that were mixed with fluorescein, and then were filled with Dyract and F-2000 compomer. Specimens were embedded in transparent acrylic resin and sectioned buccolingual1y with diamond wheel saw, and then mounted on cover slide for CLSM study. The interface between cavity and compomer was observed by fluoresence imaging with a CLSM. The results were as follows : 1. In SEM exammination of Dyract group, control group, experimental group 2, 3 showed close adaptation to dentin and hybrid layer of $3{\sim}4{\mu}m$ diameter. Interfacial gap between compomer and dentin in experimental group 1 was wider than in control group. 2. In SEM examination of F-2000 group, adaptation to dentin of control group was closer than Dytact control group, but hybrid-like layer was not observed. Interfacial gap between compomer and dentin in experimental group 1 was wider than in Dyract experimental group 1. 3. In dissolution specimens of Dyract and F-2000 group, resin tags penetrated through dentinal tubules in control group and experimental group 1 and 3, but the penetration of resin tag was irregular and partial in experimental group 1. 4. In CLSM exammination of Dyract and F-2000 group, adhesive patterns of control and experimental groups showed same as in SEM. This result suggests the treatment methods, rinsing & drying, repeating all adhesive procedures, will produce good effect on adaptation of compomer to dentin if the dentin surface or polymerized adhesive is contaminated by saliva.

• Applied Microscopy
• /
• v.39 no.1
• /
• pp.9-15
• /
• 2009

The ultrastructure of the fertilized egg envelope in Cichlasoma managuensis belonging to Cichlidae were investigated by routine light and electron microscopes. The fertilized eggs of Cichlasoma managuensis was of the light yellow, non-transparent, ellipsoidal, adhesive and nonfloted type. The size of fertilized egg was the major axis $1.92{\pm}0.08\;mm$, the minor axis $1.43{\pm}0.04\;mm$. The egg envelopes have a single micropyle, which is thought to the pathway of sperm in the area of the animal pole. An outer surface of fertilized egg envelope was covered by a adhesive reticular structures and the fertilized egg envelopes consisted of two distinct layers; an outer adhesive layer and an inner layer of $13{\sim}15$ horizontal lower electron density lamellae alternating with interlamellae of higher electron density. The external shape of fertilized egg is common trait of fishes belonging to Cichlidae and these ultrastructural characters of fertilized egg envelope can be utilized in taxonomy of teleost.

• Applied Microscopy
• /
• v.29 no.3
• /
• pp.343-351
• /
• 1999

The structures of the fertilized egg envelope from three species, three-spot gourami (Trichogaster trichopterus), pearl gourami (Trichogaster leeri) and marble gourami (Trichogaster trichopterus trichopterus) belong to Belontiidae were observed, utilizing light, scanning and transmission electron microscopes. In all three species, the fertilized eggs were the colorless, transparent, spherical, adhesive and pelagic type. A large oil droplet was located in vitelline membrane of the fertilized egg. The egg envelopes have a single micropyle, which is thought to the pathway of sperm in the area of the animal pole. Specially, the micropyle of three-spot gourami was similar to that of marble gourami which is subspecies of three-spot gourami. An outer surface of the fertilized egg envelope was arranged by grooves in all three species. The fertilized egg envelopes consists of two distinct layers; an adhesive outer layer and an inner layer with high electron density. In conclusion, the morphological similarity of the fertilized egg, micropyle, outer surface and transverse section of the fertilized e9g envelope seems to be an indication of the Belontiidae.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.7
• /
• pp.1448-1452
• /
• 2004

In this paper, a photodiode capable of obtaining a sufficient photo/ dark current ratio at both a forward bias state and a reverse bias state is proposed. The photodiode includes a glass substrate, an Cr thin film formed as a lower electrode over the glass substrate, Cr silicide thin film(∼l00$\AA$) ) formed as a schottky barrier over the Cr thin film, a hydrogenated amorphous silicon film formed as a photo conduction layer over a portion of the Cr silicide thin film. Transparent conduction film ITO (thickness 100nm) formed as an upper electrode over the hydro-generated amorphous silicon film is then deposited in pure argon at room temperature for the Schottky contact and light window. The high quality Cr silicide thin film using annealing of Cr and a-Si:H is formed and analyzed by experiment. We have obtained the film with a superior characteristics. The dark current of the ITO/a-Si:H Schottky at a reverse bias of -5V is ∼3$\times$IO-12 A/un2, and one of the lowest reported, hitherto. AES(Auger Electron Spectroscophy) measurements indicate that this notable improvement in device characteristics stems from reduced diffusion of oxygen, rather than indium, from the ITO into the a-Si:H layer, thus, preserving the integrity of the Schottky interface. The spectral response of the photodiode for wavelengths in the range from 400nm to 800nm shows the expected behavior whereby the photocurrent is governed by the absorption characteristics of a-Si:H.

• Korean Journal of Optics and Photonics
• /
• v.34 no.4
• /
• pp.157-169
• /
• 2023

Augmented reality (AR) using a head mounted display (HMD) is used in various fields such as military, medicine, manufacturing, gaming, and education. In this paper, we discuss the design and fabrication of the AR optical system, which is most essential for HMD. The AR optical system for HMD requires a wide transparent area in which the augmented image of the display and the real world can be viewed at the same time. To this end, an AR optical system was designed and manufactured by dividing it into three parts according to each characteristic. Also, the refractive index of the ultra-violet (UV) adhesive layer required to make the three optical systems into one complete AR optical system was considered from the design stage to minimize the optical path shift phenomenon when the input light source passes through the UV adhesive layer. In addition, when designing the AR optical system, two aspheric surfaces were used to compensate for off-axis aberration and to be suitable for mass production. Finally, for HMD mass production, an aspheric AR optical system with a thickness of 11 mm, a diagonal field of view of 40°, and a weight of 11.3 g was designed and manufactured.