• Journal of the Earthquake Engineering Society of Korea
• /
• v.26 no.6
• /
• pp.227-235
• /
• 2022

For a member model in nonlinear structural analysis, a lumped plastic model that idealizes its flexural bending, shear, and axial behaviors by springs with the nonlinear hysteretic model is widely adopted because of its simplicity and transparency compared to the other rigorous finite element methods. On the other hand, a challenging task in its numerical solution is to satisfy the equilibrium condition between nonlinear flexural bending and shear springs connected in series. Since the local forces between flexural and shear springs are not balanced when one or both springs experience stiffness changes (e.g., cracking, yielding, and unloading), the additional unbalanced force due to overshooting or undershooting each spring force is also generated. This paper introduces an iterative scheme for numerical solutions satisfying the equilibrium conditions between flexural bending and shear springs. The effect of equilibrium iteration on analysis results is shown by comparing the results obtained from the proposed method to those from the conventional scheme, where the equilibrium condition is not perfectly satisfied.

• Journal of Korean Association for Spatial Structures
• /
• v.14 no.3
• /
• pp.93-100
• /
• 2014

Ethylene Tetrafluoroethylene (ETFE) has been widely used in long-span buildings because of its light weight and high transparency. This paper studies the short and long term creep behaviour of ETFE foil. A series of short-term creep and recovery tests were performed, in which the residual strain was observed. A long-term creep test of the ETFE foil was also performed over 110 days. A viscoelastic-plastic model was then established to describe the short-term creep and recovery behaviour. The model contains a traditional multi-Kelvin part and an added steady-flow component to represent the viscoelastic and viscoplastic behaviour, respectively. The model successfully fit the data for three stresses and six temperatures. Additionally, time-temperature equivalency was adopted to predict the long-term creep behaviour of ETFE foil. Horizontal shifting factors were determined from the process of shifting creep-curves at six temperatures. The long-term creep behaviours at three temperatures were predicted. Finally, the long-term creep test showed that the short-term creep test at identical temperatures insufficiently predicted additional creep behaviour, and the long-term test verified the horizontal shifting factors derived from the time-temperature equivalency.

• International Journal of Reliability and Applications
• /
• v.1 no.2
• /
• pp.105-113
• /
• 2000

This paper discusses some problems of the TMN-based architecture of integrated network management systems and presents a CORBA-based architecture of distributed network management system with reliability, which maintains location transparency of distributed managed objects and provides an interoperability among heterogeneous networks and systems. In this paper, the proposed distributed management system model has been applied to the TMN based management systems and then considered for qualitative evaluation of system performance. Two different types of implementation models have been proposed: one is a system using a CORBA gateway and the other is a pure CORBA system, which maps all managed objects into CORBA objects. The characteristics of two system model have been compared in the respect of system implementation

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.4
• /
• pp.791-802
• /
• 1996

In this paper, we discuss a distributed shared memory management scheme based on multi-threaded programming model for a large-scale loosely coupled multiprocessor system. The scheme covers three major issues in the distribued shared memory;the address translation table management, the block coherence maintenance, and the block placement policy. The scheme efficiently resolves the general problems occurred in the distributed shared memory such as a false sharing, an unnecessary replication, a block bouncing, and an address aliasing phenomenon. It also provides the application transparency, good scalability, easy implementation, and multithreaded programming model to users.

• Architectural research
• /
• v.14 no.1
• /
• pp.11-18
• /
• 2012

College of Architecture, Georgia Institute of Technology, Atlanta, GA, US Abstract The intermittent heating and cooling energy need calculation of the ISO 13790 monthly method was examined. The current ISO 13790 method applies a reduction factor to the continuous heating and cooling need calculation result to derive the intermittent heating and cooling for each month. This paper proposes a method for the intermittent energy need calculation based on the internal mean temperature calculation. The internal temperature calculation procedure was introduced considering the heat-balance taking into account of heat gain, heat loss, and thermal inertia for reduced heating and cooling period. Then, the calculated internal mean temperature was used for the intermittent heating and cooling energy need calculation. The calculation results from the proposed method were compared to the current ISO 13790 method and validated with a dynamic simulation using EnergyPlus. The study indicates that the intermittent heating and cooling energy need calculation method using the proposed model improves transparency of the current ISO 13790 method and draws more rational outcomes in the monthly heating and cooling energy need calculation.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05b
• /
• pp.111-114
• /
• 2011

Korea construction industry needs to secure its competitiveness in global construction markets and to urgently find out the proper approaches in consideration of the current situation of Korean construction enterprises and environmental changes in the international market. Korea has national plan to improve the competitive level of the construction industry. Expecially, Government is trying to build the global system in construction industry. But there are no the related national competitive date. Therefore, this paper suggested national competitive indicators and development direction in construction industry. And this research has presented the competitiveness analysis of construction industry with the consideration of condition of infrastructure, transparency and technological competitiveness.

• Journal of The Korean Astronomical Society
• /
• v.34 no.4
• /
• pp.293-295
• /
• 2001

A numerical scheme that incorporates a self-consistent cosmic-ray (CR, hereafter) injection model into the combined gas dynamics and CR diffusion-convection code has been developed. The hydro/CR code can follow in a very cos-effective way the evolution of CR modified shocks by adopting subzone shock-tracking and multi-level Adaptive Mesh Refinement techniques. The injection model is based on interactions of the suprathermal particles with self-generated MHD waves in quasi-parallel shocks. The particle injection is followed numerically by filtering the diffusive flux of suprathermal particles across the shock to upstream region according to a velocity-dependent transparency function, which represents the fraction of leaking suprathermal particles. In the strong shock limit of Mach numbers $\ge$20, significant physical processes such as the injection and acceleration seem to become independent of M, while they are sensitively dependent on M for M < 10. Although some particles injected early in the evolution continue to be accelerated to higher energies, the postshock CR pressure reaches a time asymptotic value due to balance between acceleration and diffusion of the CR particles.

• Journal of Information Science Theory and Practice
• /
• v.6 no.1
• /
• pp.18-30
• /
• 2018

Interest in open data is continuing to grow around the world. In particular, open government data are considered an important element in securing government transparency and creating new industrial values. The South Korean government has enacted legislation on opening public data and provided diversified policy and technical support. However, there are also limitations to effectively utilizing open data in various areas. This paper introduces an administrative district knowledge model to improve the sharing and utilization of open government data, where the data are semantically linked to generate a knowledge graph that connects various data based on administrative districts. The administrative district knowledge model semantically models the legal definition of administrative districts in South Korea, and the administrative district knowledge graph is linked to data that can serve as an administrative basis, such as addresses and postal codes, for potential use in hospitals, schools, and traffic control.

• Journal of Information Technology Applications and Management
• /
• v.29 no.6
• /
• pp.135-144
• /
• 2022

In this study, we transformed 4680 type lithium-ion batteries to 3-dimensional CAD models and present a methodology to detect defects using Radon inverse transformation. Transparency was applied to the model to make it look like a CT image when viewed from the front. One normal and three defect models were created and analyzed. The models were saved as image files while rotating at a certain angle. Then, we used the Radon inverse transformation to reconstruct the original 3D geometry from the image files. Finally, we successfully found defects in the defect models for three cases.

• Journal of the Korean Society of Food Culture
• /
• v.28 no.3
• /
• pp.282-292
• /
• 2013

The purpose of this study is to identify a suitable organizational diagnostic model for analyzing the management efficiency of food service firms. We used the three-iteration Delphi technique on a panel of 19 business employees, 7 industry experts, and 4 employees in the food service industry. A total of 36 assessment indicators were developed through this panel, with numerous major findings. First, it is important to evaluate the leadership qualities of employees in terms of their motivation and competency. Second, it is important to evaluate the ability of employees to interface well with other employees. Third, it is important to evaluate and manage the brand image recognized by customers. Fourth, it is important to evaluate the fairness and regularity of the rewards given for an excellent job performance. Fifth, it is important to evaluate the level of communication and information distribution in the organizational culture. Last, but not least, it is important to evaluate the transparency and fairness of an organization in its human resource management (HRM) and the efficiency of its organizational structure. In conclusion, this study empirically shows how food service firms can develop an organizational diagnostic model to increase their managerial efficiency.