Journal of the Korea Academia-Industrial cooperation Society
/
v.17
no.7
/
pp.607-615
/
2016
This study concerns the transmission of energy and data using induced electromotive force. Due to the requirements of weapon systems, most arms are kept in an armory for a very long time before being used. During this time, the reserve battery, which serves mostly as a power supply for the electronic fuze, can be degraded, thus causing problems when it is actually needed. We attempt to solve the various problems associated with the old fuze system caused by long-term storage by using the 'induction power' transmitted from another device just before its operation, instead of using 'built-in power'. We tried to find the best carrier frequency to communicate with the system by induced electromotive force. Also, we changed the communication method for transmitting the 'induction power' from 'FM/AM modulation' to 'Duty ratio modulation', which can transmit a large amount of data in a short time. Through experiments, it was demonstrated that the induction coil can replace the reserve fuze's battery without any problem, thus confirming the possibility of using an induction coil as the power supply source of the electronic fuze.
With the advance and proliferation of computer and wireless network technology, it is common to access to network through the wireless network using mobile device. The ratio of using the streaming media out of many applications through the network is increasing not only in the wired network but also in the wireless network. The streaming media is much bigger than other contents and requires more network bandwidth to communicate and more computing resources to process. However the mobile devices have relatively poor computing resource and low network bandwidth. If the streaming media service is provided for mobile devices without any consideration about the network bandwidth and computing power, it is difficult for the client to get the service of high quality. Since especially mobile devices are supported with very limited energy capacity from the battery, the streaming media service should be adjusted to the varying energy state of mobile devices to ensure the complete playback of streaming media. In this paper, we propose a new method to guarantee the complete playback time of the streaming media for the mobile clients by dynamically controlling transmitted frame rate to the client according to the estimated available time of mobile device using battery model reflecting the characteristic of the battery. Since the proposed method controls the number of frames transmitting to the client according to the energy state of the mobile device, the complete playback time is guaranteed to mobile clients.
Park, Heung-Sik;Kim, Kyu-Heon;Lee, Gun-Hee;Yun, Kug-Jin;Suh, Doug-Young;Park, Gwang-Hoon
Journal of Broadcast Engineering
/
v.14
no.6
/
pp.769-782
/
2009
Stereoscopic video service is one of the most widely adopted technologies for 3-Dimensional technology. However, the stereoscopic video service has not been penetrated into the market since there does not exist a proper transmission method even though the conventional MPEG-2 Transport Stream (TS) has support for broadcast service of mono-scopic video contents. This is partly because the MPEG-2 TS does not support displaying a stereoscopic video content which consists of several composition types widely used in the market. This paper proposes the new MPEG-2 TS specification suitable for transmitting and displaying stereoscopic video contents. In order to show feasibility of the proposal, this paper describes an end-to-end system which is implemented with consideration of the method how to multiplex and de-multiplex stereoscopic video contents as well as keeping backward compatibility with the traditional MPEG-2 TS.
Journal of the Institute of Electronics Engineers of Korea CI
/
v.46
no.4
/
pp.61-68
/
2009
In this paper, we propose a Cluster-based Cooperative Routing using ARQ (CCRA) for supporting both reliability and transmitting efficient service in mobile ad-hoc wireless sensor networks with Rayleigh fading environments. The main contributions and features of this paper are as follows. First, the clustering method which uses the position information of nodes as underlying structure for supporting reliable transmission services is used. Second, the cooperative data transmission method based on the underlying clustering informations is used to improve both reliability and data transmission efficiency. Third, the ARQ-based transmission is used to improve transmission reliability. Fourth, we consider a realistic approach, in the points of view of mobile ad-hoc wireless sensor networks, based on mobile sensor nodes as well as fixed sensor nodes in the sensor fields while the conventional research for sensor networks focus on mainly fixed sensor networks. The performance evaluation of proposed routing protocol implemented via simulation using Optimized Network Engineering Tool (OPNET) and theoretical analysis.
Journal of the Institute of Electronics Engineers of Korea SP
/
v.43
no.1
s.307
/
pp.27-38
/
2006
The main purpose of rate control is to achieve the highest video quality when bandwidth or storage capacity is limited. For this purpose, we need a rate control algorithm which is adaptively controlled by the motion information of sequences, scene change, buffer capacity and time-varing bandwitdh channels. A rate-control method in the encoder requires the accurate estimation of target bit for each frame and the low end-to-end delay for transmitting video data by intelligent selection of encoding parameters. In this paper, we suggest three kinds of linear relation in the encoder to satisfy the characteristics of rate control. The first relation is that between the percentage of zero quantized transformed coefficients(p) and coded bits. Second relation is that between the PSNR of encoded frame and its Quantization parameter(QP). Finally, we can find out a linear approximation between QP and p. According to the experimental analysis, the proposed method results in an efficient rate control in terms of the bit estimation, the buffer capacity, and PSNR compared with the existing rate control in the H.264 JM 9.3.
The Journal of The Korea Institute of Intelligent Transport Systems
/
v.9
no.6
/
pp.136-150
/
2010
Due to the effect of indoor coverage problem, the QoS of the indoor users will be degraded dramatically, with the number of indoor users. The femto cell is a popular solution for such problems. Since the price of the femto base station is usually cheap enough, one can sets up huge number of base stations in a small indoor area to reduce the size of communication cell. In this way, the QoS of the indoor users can be improved significantly. Moreover, the data rate can also be increased. However, how to decide an ideal transmitting power according to the surrounding radio environment is not a trivial problem, that still has not been addressed well. If the transmit power of femto base station is too large, the interference to the macro users will be increased. Conversely, if the transmit power of femto base station is too small; the coverage of femto base station will be reduced. To address this problem, we propose a power configuration method in femto base station using Genetic Algorithm by investigating a new fitness function. Furthermore, we adopt the weighted sum approach to improve the user performance in different modes. The simulation results show that the proposed power configuration method can not only improves the downlink SINR, but also enhance the channel capacity for both the Macro cell systems and Femto cell systems compared with some conventional methods.
Journal of the Institute of Convergence Signal Processing
/
v.15
no.4
/
pp.183-191
/
2014
This paper describes the development of the observational data transmission algorithm for high-speed network in radio astronomy. For the preprocessing of VLBI data observed by radio telescope, data transmission algorithm uses the VDIF specification, VDIFCP, and UDP protocol by transferring VLBI data stored in a massive storage server with one-to-one correspondence between the server and the RVDB of Daejeon correlator. A transmission method is proposed, which reads the recorded data in Mark5B VSI format and trnasmits 2048 Mbps VLBI data by software through UDP packet transmission, while RVDB system is waiting for the transmitting data from the server. In order to check the effectiveness of the proposed method, the data transmission between the massive storage server and RVDB is conducted and the transmitted data is correlated by Daejeon correlator for the accurate comparison concerning the data before and after. The transmitted data is shown to be completely the same as the original data without any data transmission loss. Henceforth, the developed data transmission algorithm in this research is expected to be applied effectively as e-VLBI for KaVA network.
The Journal of Korean Institute of Electromagnetic Engineering and Science
/
v.13
no.7
/
pp.716-725
/
2002
In this paper, we showed the applicability of power symmetric MSSI(Mid-Span Spectral Inversion) to the long-haul WDM system with the channel interference due to FWM(Four Wave Mixing). And we showed the degree of performance improvement. We used 1 dB EOP(Eye-Opening Penalty) criterion so as to evaluate the degree of compensation dependent on the variation of chirp parameter of optical pulse for the various input power in high speed tansmission system. And we evaluated the maximum input power of channel be able to be the signal to crosstalk noise (SNR) above 20 dB in the transmission link with the channel interference due to FWM. Consequently the proposed MSSI compensation method is capable to transmitting the total 68 WDM channels simultaneously with a 0.4 nm channel spacing and 5.3 dBm maximum input power in a 10 Gbps transmission link. Therefore the proposed power symmetric MSSI compensation method may be very useful for the implementation of long-haul wideband WDM transmission systems with relatively high power and improved performance.
To improve the efficiency of wireless channel, IEEE 802.11ac uses the DL MU-MIMO MAC scheme through which an AP transmits multiple frames to different mobile nodes simultaneously. IEEE 802.11ac DL MU-MIMO MAC needs a new step, called as TXOP sharing, between legacy IEEE 802.11n DL SU-MIMO's two operations, the obtaining an EDCA TXOP and the transmitting multiple frames for EDCA TXOP. In the TXOP sharing operation, both wireless channel destinations and frames transmitted for its TXOP period should are determined. So this paper deals with the TXOP sharing for improving IEEE 802.11ac MAC performance. However, the EDCA priority based method mentioned by IEEE 802.11ac standard document not fair among the buffers and the frames of buffers, and occurs in high_loss rate and high_delay about specific buffers. In this paper, we propose a new scheme of the TXOP sharing with sequencing p-AC, s-AC in similar properties, and all S-AC. This method provides a differentiated service without damage of EDCA characteristics.
Journal of the Korea Institute of Information and Communication Engineering
/
v.12
no.8
/
pp.1349-1355
/
2008
Recently many short-range transceiver systems, such as ZigBee, Bluetooth and RFID(Radio Frequency Identification), have been developed. These systems are mostly low-power transceivers. In the near future many more low-power transceivers are appeared for WPAN(Wireless Personal Area Network) and interference mitigation technologies are necessary to the low-power transceivers for using frequency resources efficiently. In this paper we consider two methods for sharing frequency resources. The first case is that a frequency band previously assigned fer a certain system is shared and the second case is that the white frequency band is shared. We study the method and conditions for sharing frequency resources in the above two cases. When a frequency band is shared with ZigBee, RFID, DCP (Digital Cordless Phone) and Bluetooth as an example for the first case, the sharing conditions are investigated and the results are presented. We propose a balancing factor to maintain an equal transmitting conditions between systems having a different interference mitigation technique. In the interference simulation we use FH(Frequency Hopping) as a reference system and 0.9 of a balancing factor for LBT(Listen Before Talk) and 0.8 for DS(Direct Spreading). From the simulation results we know that a balancing factor reduces interference probability therefore many more systems can be operated in the same frequency bands compared with the case without using a balancing factor.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.