• 제목/요약/키워드: Transmitter Receiver Module

검색결과 103건 처리시간 0.024초

50 kHz Split Beam 데이터 수록 및 처리 시스템의 성능특성 (Performance Characteristics of a 50-kHz Split-beam Data Acquisition and Processing System)

  • 이대재
    • 한국수산과학회지
    • /
    • 제54권5호
    • /
    • pp.798-807
    • /
    • 2021
  • The directivity characteristics of acoustic transducers for conventional single-beam echo sounders considerably limit the detection of fish-size information in acoustic field surveys. To overcome this limitation, using the split-aperture technique to estimate the direction of arrival of single-echo signals from individual fish distributed within the sound beam represents the most reliable method for fish-size classification. For this purpose, we design and develop a split-beam data acquisition and processing system to obtain fish-size information in conjunction with a 50-kHz single-beam echo sounder. This split-beam data acquisition and processing system consists of a notebook PC, a field-programmable gate array board, an external single-transmitter module with a matching network, and four-channel receiver modules operating at a frequency of 50-kHz. The functionality of the developed split-beam data processor is tested and evaluated. Acoustic measurements in an experimental water tank showed that the developed data acquisition and processing system can be used as a fish-sizing echo sounder to estimate the size distribution of individual fish, although an external single-transmitter module with a matching network is required.

WLL용 CDMA 시스템 IF 모듈의 구현 및 위상 특성 (On the Phase Variation and Implementation of If Module for WLL CDMA System)

  • 강병권;김선형
    • 한국정보통신학회논문지
    • /
    • 제4권1호
    • /
    • pp.219-226
    • /
    • 2000
  • 본 논문에서는 WLL 광대역 코드분할 다원 접속(Wideband CDMA) 시스템 기지국용 If(Intermediate Frequency) 송수신기의 설계 및 구현에 대하여 고찰하였다. 제작된 IF 송수신기는 송신단, 수신단, 국부발진기로 구성되었다. 처리되는 신호의 대역폭을 10MHz로 고려하여 IF 반송파는 40MHz로 설계하였으며, 측정 결과 IF 송신단의 출력 전력은 기저 대역 입력이 -10dBm $\pm3dB$ 일 때 40MHz에서 -5dBm $\pm3dB$, 수신단의 출력 전력은 IF 대역 입력이 -5dBm $\pm3dB$ 일 때 기저대역에서 -10dBm $\pm3dB$의 특성을 얻었다. 또한, 자동이득 조절 루프는 -7dBm에서 +2dBm까지의 9dB 입력 범위에서 동작하여 약 2dBm의 일정한 레벨을 출력시켰고, 1MHz부터 5MHz까지의 신호를 스윕시켜 IF시스템 내에서의 위상 변화를 관찰한 결과 위상 왜곡이 매우 적어 데이터 통신시스템에 적용이 가능함을 보였다.

  • PDF

가시광 통신을 이용한 사용자 인식 시스템 (An User-aware System using Visible Light Communication)

  • 김종수;이원영
    • 한국전자통신학회논문지
    • /
    • 제14권4호
    • /
    • pp.715-722
    • /
    • 2019
  • 본 논문은 가시광 통신을 이용한 사용자 인식 시스템의 구현 방법과 시스템 동작 결과를 소개하고 있다. 가시광 통신을 이용한 사용자 인식 시스템은 안드로이드 시스템 기반의 송신부와 오픈소스 컨트롤러 기반의 수신부로 나뉘어져 있다. 송신부 모듈에서는 사용자의 개인 인식 정보 데이터를 코드로 변환하고 이를 안드로이드 기반의 스마트폰 카메라 인터페이스를 사용하여 가시광으로 변환하여 수신부로 전송한다. 수신부에서는 포토다이오드 모듈을 통해 가시광을 수신하고 이를 전기신호로 변환한다. 수신 데이터에 대한 프로세싱 모듈역할은 오픈소스 컨트롤러가 맡게 되며, 본 시스템에서는 AVR 마이크로 컨트롤러 기반의 아두이노를 사용하였다. 버스트모드(burst mode) 방식의 통신이 가능하도록 0111의 비트 패턴을 스타트비트로 설정하고 이를 인식하도록 하였다. 실험 결과, 제안하는 시스템은 가시광을 매개로 맨체스터 데이터 인코딩 (Manchester data encoding)방식의 데이터 송신과 수신이 가능함을 확인하였다.

A Fully Synthesizable Bluetooth Baseband Module for a System-on-a-Chip

  • Chun, Ik-Jae;Kim, Bo-Gwan;Park, In-Cheol
    • ETRI Journal
    • /
    • 제25권5호
    • /
    • pp.328-336
    • /
    • 2003
  • Bluetooth is a specification for short-range wireless communication using the 2.4 GHz ISM band. It emphasizes low complexity, low power, and low cost. This paper describes an area-efficient digital baseband module for wireless technology. For area-efficiency, we carefully consider hardware and software partitioning. We implement complex control tasks of the Bluetooth baseband layer protocols in software running on an embedded microcontroller. Hardware-efficient functions, such as low-level bitstream link control; host controller interfaces (HCIs), such as universal asynchronous receiver transmitter (UART) and universal serial bus (USB)interfaces; and audio Codec are performed by dedicated hardware blocks. Furthermore, we eliminate FIFOs for data buffering between hardware functional units. The design is done using fully synthesizable Verilog HDL to enhance the portability between process technologies so that our module can be easily integrated as an intellectual property core no system-on-a-chip (SoC) ASICs. A field programmable gate array (FPGA) prototype of this module was tested for functional verification and realtime operation of file and bitstream transfers between PCs. The module was fabricated in a $0.25-{\mu}m$ CMOS technology, the core size of which was only 2.79 $mm{\times}2.80mm$.

  • PDF

Implementation of the Golf Play Advice System with Reasoning Rules Using Mobile Devices

  • Kim, Kapsu;Min, Meekyung
    • International journal of advanced smart convergence
    • /
    • 제7권2호
    • /
    • pp.47-54
    • /
    • 2018
  • This paper is a study on implementation of the golf play advice system which provides advice to golfers through mobile devices. The system consists of a mobile unit consisting of a GPS receiver, a data transmitter and receiver, and a display unit, and a server unit composed of a database and advice generator. The advice generator that provides advices to the users, generates advices with IF-THEN rule-based reasoning method. The reasoning module utilizes golfer's personal records and various information in the database of the server unit. This system provides the advice to the users who play on the golf course through mobile devices, so that it is possible to provide various information similar to the screen golf using the computer simulating technology in the outdoor golf course.

Transceiver for Human Body Communication Using Frequency Selective Digital Transmission

  • Hyoung, Chang-Hee;Kang, Sung-Weon;Park, Seong-Ook;Kim, Youn-Tae
    • ETRI Journal
    • /
    • 제34권2호
    • /
    • pp.216-225
    • /
    • 2012
  • This paper presents a transceiver module for human body communications whereby a spread signal with a group of 64 Walsh codes is directly transferred through a human body at a chip rate of 32 Mcps. Frequency selective digital transmission moves the signal spectrum over 5 MHz without continuous frequency modulation and increases the immunity to induced interference by the processing gain. A simple receiver structure with no additional analog circuitry for the transmitter has been developed and has a sensitivity of 250 ${\mu}V_{pp}$. The high sensitivity of the receiver makes it possible to communicate between mobile devices using a human body as the transmission medium. It enables half-duplex communication of 2 Mbps within an operating range of up to 170 cm between the ultra-mobile PCs held between fingertips of each hand with a packet error rate of lower than $10^{-6}$. The transceiver module consumes 59 mA with a 3.3 V power supply.

이더넷 광 네트워크 구현을 위한 1.25 Gbps 광전 트라이플렉스 트랜시버 모듈의 전기적 혼신의 분석 (Characterization of Electrical Crosstalk in 1.25 Gbps Optoelectrical Triplex Transceiver Module for Ethernet Passive Optical Networks)

  • 김성일;이해영
    • 대한전자공학회논문지SD
    • /
    • 제42권3호
    • /
    • pp.25-34
    • /
    • 2005
  • 본 논문에서는 이더넷 광 네트워크 구현을 위한 핵심 부품인 1.25 Gbps 광전 트라이플렉스 트랜시버 모듈(Opto-electric triplex transceiver module)의 동작성능 안정화를 위하여 모듈내에서 발생되는 전기적 혼신을 해석 및 측정하였으며, 혼신 감소를 위한 가상접지선(Dummy ground line)이 포함된 신호선 구조를 제안하였다. 광전 트라이플렉스 트랜시버 모듈은 전기신호를 광신호로 바꾸어 전송하는 송신부(Laser diode), 디지털 변조되어 입력된 광신호를 전기신호로 변환하는 디지털 수신부 (Digital photodetector)와 고해상도의 CATV (Community antenna or access television) 신호를 수신하는 아날로그 수신부 (Analog photodetector)가 실리콘 기판(Silicon substrate) 상에 하이브리드 집적되어 구성된다. 디지털 수신부와 아날로그 수신부의 수신감도는 각각 BER(Bit error rate) : $10^-{12}$에서 -24 dBm과 44 dB의 신호대잡음비(Signal-to-noise ratio, SNR)에서 -7.7 dBm을 만족해야하므로 모듈 내의 전기적 혼신은 DC에서 3 GHz까지 - 86 dB이하로 유지되어야한다. 전기적 혼신의 해석 및 측정 결과, 실리콘 기판상의 광원과 디지털 광검출기, 디지털 광검출기와 아날로그 광검출기 사이의 거리를 4 mm 이상 확보하며, 가상접지선을 디지털 광검출기와 아날로그 광검출기의 신호선과 $100\;{\mu}m$ 간격으로 설치하였을 경우, -86 dB 이하의 전기적 혼신 레벨을 만족할 수 있음을 확인하였다. 본 논문에서 제안한 가상접지선을 사용하는 방법은 실리콘 기판상에 신호선을 형성할 때 동시에 형성할 수 있으므로 별도의 추가비용 없이 구현할 수 있으며, 단순히 광원 및 광 검출기의 사이간격을 충분히 확보하는 방법에 비하여 실리콘 기판의 크기를 감소시켜 최종 모듈의 크기를 약 $50\%$ 감소시킬 수 있다는 장점이 있다.

VHDL Module Implementation of High-speed Wireless Modem using Direct Sequence Spread Spectrum Communication Method

  • Lee, Jung-Ha;Kim, Il-Hwan
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2001년도 ICCAS
    • /
    • pp.113.3-113
    • /
    • 2001
  • In this paper, we have designed the VHDL module of DS/SS QPSK wireless modem processor for digital data communication. The spread spectrum method is used for modern processor, because this method guarantees good frequency efficiency and higher security. Also, it guarantees good performance in digital communication system under multi-path interferences. The differential encoder and decoder are used for simple circuit composition in the signal detection. For the synchronization of receiver, matched filter and power detector are used. And the IF modulation/demodulation of QPSK method is used in the digital level. The transmitter of VHDL modem processor consists of differential encoder, PN code generator, and QPSK ...

  • PDF

차상 ATO/TWC 안테나 설계 및 제작에 관한 연구 (A Study on On-board ATO/TWC Antenna Design and Manufacture)

  • 유성호;박종천;강리택;조영완;차기주
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2005년도 춘계학술대회 논문집
    • /
    • pp.903-908
    • /
    • 2005
  • Existing ATC/ATO/TWC system has a ATC(Automatic Train Control) antenna for receiving the speed code, a ATO(Automatic Train Operation) antenna for obtaining the exact distance to go to platform and TWC(Train and Wayside Communication) antenna for communication between on-board and wayside system. This paper proposes the ATO/TWC antenna with tele-powering module, telegram transmitter/receiver module. This antenna communicates with a passive type tag(wayside Precision Stop Marker) for the information of distance from the stop position and a active type tag for the door command and status in the platform.

  • PDF

마이크로프로세서를 이용한 근거리 무선 송수신 시스템의 구현과 성능측정에 관한 연구 (A Study on Implementation and Performance Measurement of a Short Distance Wireless Transceiver System with Microprocessor)

  • 차용성;강병권
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
    • /
    • pp.305-308
    • /
    • 2001
  • In this paper, we realized a transceiver system for short distance communication with a commercial RF module working in ISM band and a microprocessor. Also we measured system performance by transmitting baseband data in a building and then we compared the demodulated 긴ta bits with stored data bits in a PC connected with demodulator. The RF module in the experiments works oかy in the bandwidth, 424MHz - 429MHz. with FM mode. The signal level degrades as the distance between transmitter and receiver increases we measured the signal level and bit error in the building of engineering college of our university. we present the measured data with various locations in the building. and the data may be used in design short distance network in a building.

  • PDF