• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 추계학술대회
• /
• pp.480-483
• /
• 2018

본 논문에서는 CMOS센서 기반 가시광 통신 시스템에서 고속전송을 위한 다중 광원의 간섭제거 및 이미지 센싱 처리기술에 대해서 연구하였다. 이미지센서를 통한 광학카메라 통신에서 전송 용량을 향상 시키려면 각 LED에서 다른 데이터를 동시에 전송해야한다. 그러나 고속전송을 위한 다수의 LED광원 환경은 인접한 LED 간 간섭을 일으킬 수 있다. 이 경우, 가시광통신시스템은 일반적으로 세기 변조를 사용하기 때문에 다수의 LED가 동시에 데이터를 전송할 경우 인접한 LED의 빛 퍼짐 간섭으로 인해 각각의 LED들의 정확한 신호 검출이 어렵다. 이러한 문제를 해결하기 위해서, 듀얼 CMOS 센서를 사용하여 다수의 광원 LED의 ON/OFF 상태를 정확히 인식하고, 각각의 LED들의 이미지 시그널 프로세싱 기법을 제안하였다. 이러한 기법을 통해 다수의 LED픽셀을 정확하게 인식하여 다중LED OCVLC 시스템의 총 평균 비트 오류율과 처리량을 향상시킬 수 있다.

• 전기학회논문지
• /
• 제58권3호
• /
• pp.559-565
• /
• 2009

In this paper, we invented a new and unique technique for the sterilization of Escherichia coli(E. coli) in polluted water. We applied a rich ultra-violet(UV) light from pulsed xenon flashlamp and photocatalyst(TiO2) to sterilize E. coli in polluted water. This method based on the use of UV light and photocatalyst is eco-friendly and does not cause secondary pollution. The proposed elliptical reactor is able to concentrate on quartz sleeve coated TiO2 or general quartz sleeve. The primary objective of our research was to determine the important parameters such as pulse repetition rate and input voltage and to know on the sterilizing efficiency of quartz sleeve coated TiO2 and general quartz sleeve. We obtained to achieve 99.999% sterilization in as little as 6 pulses at 800V in case of quartz sleeve coated Ti02, and 10 pulses at 800V in case of general quartz sleeve for 5 minutes. Although transmitted light of quartz sleeve coated TiO2 is deceased, the sterilizing efficiency is increased by 40% than general quartz sleeve. The reason of high sterilizing efficiency is that generated hydroxyl radical(OH) by photocatalyst and is able to concentrate light at a focus by using elliptical reactor.

• 센서학회지
• /
• 제25권2호
• /
• pp.131-137
• /
• 2016

In this study, a multilevel visible light communication (VLC) system based on resistor ladder circuit is designed to transmit medical data. VLC technology is being considered as an alternative wireless communication due to various advantages such as ubiquity, license free operation, low energy consumption, and no radio frequency (RF) radiation characteristics. With VLC even in places where traditional RF communication (e.g., Wi-Fi) is forbidden, significant bio-medical signal including the electrocardiography (ECG) and photoplethysmography (PPG) data can be transmitted. More lives could be saved anywhere by this potential advantage of VLC with a fast emergency response time. A multilevel transmission scheme is adopted to improve the data capacity with keeping simplicity, where data transmission rate can increase by log2m times (m is the number of voltage levels) than that of conventional VLC transmission based on on/off keying. In order to generate multi-amplitudes, resistor ladder circuit, which is a basic principle of digital to analog convertor, is employed, and information is transferred through LED (Light-Emitting Diode) with different voltage level. In the receiver side, multilevel signal is detected by optical receiver including a photo diode. Then, the collected data are analyzed to serve the necessary medical care to the concerned patient.

• 조명전기설비학회논문지
• /
• 제24권5호
• /
• pp.1-7
• /
• 2010

광원으로써 다양한 장점을 가지고 있는 LED 소자는 응용 분야의 확대가 빠르게 진행되고 있다. 특히 조명 분야의 LED 응용은 더욱 활발하다. 본 논문에서는 비교적 낮은 광량이 요구되는 옥내 외 문자표시용 광원, 양면 발광형 광원, 저휘도 LED BLU 분야에 적합하도록 투명 Plate와 LED 칩을 조합하여 광원을 구현하였다. 투명광원 구현을 위해 폴리카보네이트 계열의 plate 사용하였으며 LED 칩의 구동을 위한 구리회로를 plate 표면에 형성하였다. 또한 기존 패키지를 사용하던 LED 광원 대신 투명 plate 표면에 LED 칩을 직접 장착하는 기술을 적용하였다. 최종 제품은 다수개의 광원 모듈을 결합하여 BLU또는 면광원에 적합한 샘플을 제작하였다.

• Journal of the Optical Society of Korea
• /
• 제9권4호
• /
• pp.162-168
• /
• 2005

Extraordinary phenomena related to the transmission of light via metallic films with subwavelength holes and grooves are known to be due to resonant excitation and interference of surface waves. These waves make various surface structures to have optically effective responses. Further, a related study subject involves the control of light transmitted from a single hole or slit by surrounding it with diffractive structures. This paper reports on the effects of controlling light with a periodic groove structure with Fresnel-type chirping. In Fresnel-type chirping, diffracted surface waves are coherently converged into a focus, and it is designed considering the conditions of constructive interference and angular spectrum optimization under the assumption that the surface waves are composite diffracted evanescent waves with a well-defined in-plane wavenumber. The focusing ability of the chirped periodic structures is confirmed experimentally by two-beam attenuated total reflection coupling. Critical factors for achieving subwavelength foci and bounds on size of focal spots are discussed in terms of the simulation, which uses the FDTD algorithm.

• 한국전기전자재료학회논문지
• /
• 제36권2호
• /
• pp.143-150
• /
• 2023

Underwater wireless communication is a challenging issue for realizing the smart aqua-farm and various marine activities for exploring the ocean and environmental monitoring. In comparison to acoustic and radio frequency technologies, the visible light communication is the most promising method to transmit data with a higher speed in complex underwater environments. To send data at a speedier rate, high-performance photodetectors are essentially required to receive blue and/or cyan-blue light that are transmitted from the light sources in a light-fidelity (Li-Fi) system. Here, we fabricated high-performance organic phototransistors (OPTs) based on P-type donor polymer (PTO2) and N-type acceptor small molecule (IT-4F) blend semiconductors. Bulk-heterojunction (BHJ) PTO2:IT-4F photo-active layer has a broad absorption spectrum in the range of 450~550 nm wavelength. Solution-processed OPTs showed a high photo-responsivity >1,000 mA/W, a large photo-sensitivity >10³, a fast response time, and reproducible light-On/Off switching characteristics even under a weak incident light. BHJ organic semiconductors absorbed photons and generated excitons, and efficiently dissociated to electron and hole carriers at the donor-acceptor interface. Printed and flexible OPTs can be widely used as Li-Fi receivers and image sensors for underwater communication and underwater internet of things (UIoTs).

• 산업융합연구
• /
• 제22권2호
• /
• pp.55-62
• /
• 2024

가시광을 이용하여 정보를 전송하는 가시광통신은 초고속, 초지연, 초연결등의 장점이 있어 6G 통신을 보완하기 위한 하나의 방안으로 연구가 진행되고 있다. 본 논문에서는 가시광통신에서 RGB 혼합비율에 의하여 발생하는 성능 열화를 극복하기 위한 연구를 진행하였다. LED 조명을 이용한 가시광통신 시스템은 조명의 역할이 중요한 기능으로 통신을 위해 사용할 경우 RGB 혼합 비율에 따른 성능 차이는 필연적으로 발생한다. 특히, 일정 기준 이하의 빛의 강도를 갖는 경우 시스템 전체의 성능을 열화시키는 문제가 발생한다. 이 연구에서는 RGB 3개의 채널 중 혼합 비율의 차이로 발생하는 통신 시스템에서 일정 성능 이하가 발생할 때, 최고의 성능을 보이는 LED를 제외하고 나머지 2개의 신호를 STBC(Space-Time Block Coding)으로 전송하여 통신의 품질을 보장하는 하이브리드 시스템에 대해서 연구를 진행하였다. 제안 시스템의 성능을 검증하기 위하여 컴퓨터 시뮬레이션을 수행하였고, 제안 시스템의 성능이 기존 시스템과 비교하여 향상된 것을 볼 수 있다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.493-495
• /
• 2005

The director profiles of the Bloch walls are directly visualized using fluorescence confocal polarizing microscopy. Both pure twist Bloch walls and diffuse Bloch walls are analyzed. Polar anchoring energy was measured from optical simulation of the transmitted light interference pattern or the fluorescence intensity profile of a pure twist wall..

• Journal of the Optical Society of Korea
• /
• 제19권4호
• /
• pp.357-362
• /
• 2015

We examine the principle of a modified Pound-Drever-Hall (PDH) technique to measure the free spectral range of a Fabry-Perot etalon (FPE). The FPE's periodic transmission of phase-modulated light allows us to adopt a sampling theorem to develop a new relationship for the PDH error signal. This leads us to find the key parameters governing the measurement accuracy: the phase modulation index ${\beta}$ and the FPE finesse. Without any additional complexity for background noise reduction, we achieve a measurement accuracy of 0.5 ppm. The improvement is mainly attributed to the wide-band phase modulation approaching ${\beta}=10$, and partly to the use of both reflected and transmitted light from the FPE and good FPE finesse.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.371-371
• /
• 2006

The purpose of this study is to provide a fundamental data for efficient and economical reduction method and predict ion method of floor impact noise. In order to get the useful results, the measurement on the vibration transmission characteristics of standard test building with four rooms by using heavy and light-weighed impact source were carried out. In this measurement various conditions such as the change of test structure construction, the pick-up sensor location, the excitation posit ion, and the resilient material types were applied to get the vibration characteristics transmitted from excitation room to adjacent rooms.