• Journal of Biomedical Engineering Research
• /
• v.14 no.2
• /
• pp.169-175
• /
• 1993

Recently, interest in infra-red(IR) telemetry has increased because of the entirely different propagation and reflection properties of IR light as compared to radiowaves. IR hardly penetrates most materials and is reflected from obstacles. An biotelemetry system using these characteristics of indirect transmitted IR lights was developed, in which 3 ECG's are multiplexed and modulated in PDM/PIM pulse sequence. This proto-type system enables us to realize the non-restraint measurement of biological signals. Compared with conventional radio telemetry, this technique has some merits such as no electromagnetic interference, no frequency allocation problem, no government control over transmission power.

• Journal of the Optical Society of Korea
• /
• v.12 no.4
• /
• pp.346-350
• /
• 2008

In this paper, we analyze the performance of a reliable, scalable, and cost-effective switchless wavelength division multiplexing (WDM) network based on an arrayed waveguide grating (AWG). The network efficiency is significantly increased by spatially reusing wavelengths and exploiting multiple free spectral ranges (FSRs) of the AWG employed in the architecture. We have analyzed the performance of this architecture by simulating in $Optsim^{TM}$ with a control channel which exploits the broadband light source, i.e., an LED. The data was successfully transmitted to a distance of 30 km without using any EDFA's in the network, with a reasonable BER of $4.0530{\times}10^{-14}$. We have analyzed the performance of this architecture with a control channel which exploits the broadband light source, i.e., an LED, by simulating in $Optsim^{TM}$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.5
• /
• pp.560-567
• /
• 2011

In this paper, we reduced the optical noise interference using polarizers in a visible light communication system. In a transmitter, two light-emitting diodes(LEDs) are modulated synchronously by the original and the reversed signals of the transmitted data, and the two LED lights are radiated through orthogonal polarizers. In a receiver, two optical signals are detected through orthogonal polarizers and differentially amplified to remove the optical noise. In an environment that noise light from a fluorescent lamp is much stronger than the signal, the receiver with orthogonal polarizers removed the 120 Hz noise, and synchronous light transmission of the original and the reversed signals using two LEDs reduced the illumination flickering to about one-eighth that using one LED.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1840-1846
• /
• 2014

An experimental outdoor optical wireless data communication system with an optical filter in the presence of sunlight or artificial light is presented. For the efficient blocking of light noise outdoors, we employ an optical filter made of microlouver film on the top of the photo diode. This filter is designed to block any light noise incident from an angle higher than $30^{\circ}$ on the assumption that light noise does not face the photo diode horizontally. Outdoor experiments daytime with the optical filtering have been conducted. The experimental results demonstrate that the optical filter effectively blocks nearly all light noise incident from the specified angle or higher and more than 90% of the transmitted data packets are successfully received. The proposed outdoor visible light data communication can thus facilitate a practical free space outdoor optical wireless data transmission.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.1079-1085
• /
• 2012

Many researchers worldwide have been making a lot of effort to find sustainable clean energy source to replace the current fossil fuels. However, solar energy is considered as the ultimate energy solution to supply the world total power consumption. Light can be used for lighting, heating, wired and wireless communications, etc. Moreover, even light-driven motors which can directly convert optical energy into kinetic energy are studied recently. In this paper, we analyze optical energy delivery through multi-core optical fibers. Our estimation shows that an optical power of 2 kW can be transmitted through a multi-core fiber and an optical power of >10 MW can be transmitted through a bundle of optical fibers with a diameter of several centimeters. It seems competitive compared with the electric power delivery through a copper cable.

• Korean Journal of Agricultural Science
• /
• v.42 no.4
• /
• pp.447-453
• /
• 2015

Increase of national family income improved demand of high-quality and year-round horticultural products including chrysanthemum. To meet these demand, farmers have introduced protected facilities, such as greenhouses, of which environmental conditions could be monitored and controlled. Environment management up to three weeks after transplanting is critical for chrysanthemum quality. Artificial lighting and light-blocking screen are especially important for long-day (day period > 13 hours) and short-day (night period > 13 hours) treatments. In this study, a web-camera was installed, and the image was obtained and transmitted to mobile phones to monitor the status of 3-wavelength(RGB) lighting environments. RGB pixel values were used to determine malfunctioning of the lighting lamps, and leaking out and incoming illumination status during short-day and long-day treatment periods. Normal lighting lamps provided RGB pixel values of 240~255. During long-day treatment period, G pixel values were useful to detect abnormal lighting conditions (e.g., leaking). During short-day treatment period, R pixel values were useful to determine incoming light (e.g., sun-light). Results of this study would provide useful information for remote monitoring of light conditions for protected chrysanthemum production under artificial lights.

• Journal of Plant Biology
• /
• v.17 no.3
• /
• pp.118-126
• /
• 1974

Mulberry plants cultivated in mid-Korea were studied on the growth habitat, canopy type, productive structure and vertical light intensity in relation to the quality of mulberry leaves for sericulture. The growth in length of new branch of summer cut mulberry in spring was vigorous on the uppermost of old shoot. Numbers of leaves on a branch were barely 4 leaves on lower than 20th branch from base, but those were 13 leaves on higher than 24th branch. Area of leaves completely expanded was broad on high branch, but narrow on low one. The form of canopy, the type of productive structure and the vertical light distribution depend upon varieties of cultivated mulberry plants were classified according to characteristic of each variety in two groups, respectively; globular and columnar form in canopy, broad leaves and narrow leaves types in productive structure, and seriously obstructured the light and fairly transmitted the light into lower leaf stratum invertical light distribution. Out of varieties of mulberry investigated, Suwon No. 4 and Rosang were belong to the former characters, but Illchiroe and Kaeryangsubun were to the latters. The values of leaf dry matter index and dry matter production produced by leaves were increased in direct proportion to the height of leaf stratum; the leaf dry matter index of the uppermost leaf was twice as much that of the lowest, and the dry matter production by the highest leaf was 17 times compared with that by the lowest leaf. It is assumed that the meagre leaves occurred in the lower leaf stratum of Suwon No. 4 and Rosang were caused to diminished the dry matter index and dry matter production in the under leaves of plant, which were affected by receiving the weak light.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8B
• /
• pp.706-711
• /
• 2012

The current visible light communication (VLC) systems have a short transmission distance and a low data rate. To overcome this, we studied on the method of appling MIMO technology to VLC. However, it is difficult to apply the original MIMO technology used in RF frequency to wireless VLC. In VLC system, a lens can be used to separate the transmitted signals. And, if we use an image sensor as the receiver, MIMO technology can be applied to LED wireless visible light communication. In this paper, we report an experiment of $2{\times}2$ LED wireless visible light communication using a commercial image sensor receiver. We show the experimental demonstration with a transmission length of 10.5 m and a data rate of 200 bit/s.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.2
• /
• pp.163-168
• /
• 2003

The eye sensitivity in the difference conditions of a light source intensity consists of two functions by the receptor of cone and rod according to a wavelength. We derived a distribution function of $P{\lambda}=A{\cdot}e^{-({\lambda}-{\lambda}_u)^2/2W^2}$ using a respond probability of the receptor of cone-rod for a photon. It was well applied for a CIE eye's sensitivity curve of a wavelength. When there is lens In front of eye, luminous efficiency should be corrected. Transmission light which permeate to depends on absorption wavelength, and relationship of final luminous efficiency's estimation method is expressed by multiplication of luminous efficiency and transmittance intensity of lens. $$Pf({\lambda})=T({\lambda}){\cdot}P({\lambda})$$. The theory was applied to photopic and scopic vision with brown color lens.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.3 no.1
• /
• pp.19-24
• /
• 1966

The maximum shear stress distribution in a stiffening flat attached to a plat undergoing a single tensile force has been investigated by photoelastic method. In the experiments a photoelastic model, as shown in Fig. 1, has been studied in the fields of a polariscope, as shown in Fig. 2. Fig. 3 shows the isoclinics and Fig. 4 and 5 are stress trajectories of the principal stresses and maximum shear stresses, respectively. Fig. 6 is the isochromatics in light field. The maximum shear stress at each point in the stiffener were determined from the isochromatics in both of light field of light field and dark field. Then the maximum shear stresses were divided by the average shear stress in the model, to obtain the ratio ${\tau}max/{\tau}av$ at each point. Finaly the variations of the ratio ${\tau}max/{\tau}av$ along the horizontal and vertical lines in the stiffener have been plotted, as shown in Fig. 7 and 8. The conclusions reached in this investigation are as follows: (1) The shear stresses transmitted to the stiffener through the juncture are concentrated on the end portions. (2) The maximum shear stress at the ends of the stiffener reaches to about 4 times of average shear stress. (3) The irregularities in the stress distribution are restricted in the end portions of the stiffener.