• 반도체디스플레이기술학회지
• /
• 제9권1호
• /
• pp.35-40
• /
• 2010

We have investigated the effects of hydrogen injection via in-situ gas addition ($O_2$, $H_2$, or $O_2$ + $H_2$ gas) and plasma post-treatment (Ar or Ar + H plasma) on material properties of ZnO that is considered to be as a channel layer in transparent thin film transistors. The variations in the electrical resistivity, optical transmittance and bandgap energy, and crystal quality of ZnO thin films were characterized in terms of the methods and conditions used in hydrogen injection. The resistivity was significantly decreased by injection of hydrogen; approximately $10^6\;{\Omega}cm$ for as-grown, $1.2\;{\times}\;10^2\;{\Omega}cm$ for in-situ with $O_2/H_2\;=\;2/3$ addition, and $0.1\;{\Omega}cm$ after Ar + H plasma treatment of 90 min. The average transmittance of ZnO films measured at a wavelength of 400-700 nm was gradually increased by increasing the post-treatment time in Ar + H plasma. The optical bandgap energy of ZnO films was almost monotonically increased by decreasing the $O_2/H_2$ ratio in in-situ gas addition or by increasing the post-treatment time in Ar + H plasma, while the post-treatment using Ar plasma hardly affected the bandgap energy. The role of hydrogen in ZnO was discussed by considering the creation and annihilation of oxygen vacancies as well as the formation of shallow donors by hydrogen.

• Current Photovoltaic Research
• /
• 제2권3호
• /
• pp.110-114
• /
• 2014

We propose a low temperature sol-gel ZnO/Ag nanowire composite thin film to fulfill low temperature and low cost requirements, which are essential criteria in future flexible electronic devices. In this proposed thin film, Ag nanowire plays the role of electrical conduction, and sol-gel ZnO provides a structural medium with a high visible transmittance. Low temperature restriction in the sol-gel fabrication process prevents sufficient oxidation of Zn acetate precursors, which were solved by a post-coating treatment with ultraviolet light irradiation. Composite thin film formation was performed by spin coating methods with a mixed precursor solution or in a sequential manner. We obtained an average visible transmittance larger than 85% and a sheet resistance smaller than $50{\Omega}/sq$. After optimization in a fabricated composite transparent conductive thin film with the thickness around 100 nm. Similar experimental demonstration in a flexible substrate (polyethyleneterephthalate) was successful, which implies a promising application opportunity of this technology.

• 생물환경조절학회지
• /
• 제18권3호
• /
• pp.232-237
• /
• 2009

본 연구는 일반적으로 이용되는 EVA 필름과 비교하여 폴리올레핀(PO), 불소, 방적, 방무, 보온필름 등의 기능성필름이 토마토의 품질에 어떤 영향을 미치는 가를 구명하고자 하였다. 분광투과특성에 있어 자외선은 불소필름이 가장 많았고 PO필름이 가장 적었으며, PAR는 불소, 보온, PO필름 등이 많았으며, 근적외선도 EVA에 비해 기능성필름이 많은 경향이었다. 전체광선의 투과율은 불소, 방무, 방적, PO, 보온, EVA 순으로 높았다. 하우스 내 주간온도는 광투과율 차이에 의해 불소필름이 가장 높고 EVA가 가장 낮았으며, 야간온도는 필름이 두꺼운 방적 및 PO필름이 가장 높게 유지되었다. 기능성필름은 EVA에 비해 과실 당도가 $0.2{\sim}0.5^{\circ}Bx$ 더 높았고, 과실 내 라이코펜 함량이 $15{\sim}30%$ 높게 나타났다. 따라서 토마토의 당도, 라이코펜 함량 등의 품질향상을 위해서는 일반필름 대신에 기능성필름을 이용하는 것이 효과적일 것으로 판단되었다.

• 약학회지
• /
• 제42권6호
• /
• pp.545-551
• /
• 1998

Near Infrared transmittance Spectroscopy (NIRS) was used to evaluate and quantify the pharmaceutical active compounds. In the paper, taurine (2-Aminoethanesulfonic acid) was quantitatively analyzed in commercial pharmaceutical preparations. For calibration a central composite factorial design was used to determine concentrations of ingredients in reference samples. For the quantitative analysis of taurine, the most suitable data analysis method includes the calculation of second derivatives and a partial least squares regression (PLSR) model. By NIR spectrometry, combined with PLSR, the taurine concentration was successfully predicted with a relative standard error of prediction (SEP) lower than 1.04%.

• 한국태양에너지학회 논문집
• /
• 제31권3호
• /
• pp.67-72
• /
• 2011

The aim of this study is to evaluate how much would the building energy consumption be saved by applying DSSC BIPV window which is possible to control the transmittance and express the color in the office building. For this, physical characteristics such as transmittance and reflectance, U-factor of DSSC areanalyzed and an annual energy consumption that is connected to dimming control is calculated when DSSC BIPV window is applied by alternate clear window system. As a result, It is possible to reduce the anannual energy consumption as much as4.1% by just change the clear double window system to DSSC BIPV double window system because the major factor to reduce energy consumption in the office that has much cooling load than other building is SHGC. When the thermal insulation properties of DSSC BIPV window with low-e coating and making triple window are improved, energy saving ratio is about 9%. Plus, energy saving ratio of 25~28% in lighting energy consumption is possible when the dimming control system with DSSC BIPV window is adopt.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.516-516
• /
• 2013

Flexible Display를 제작하기 위해서는 유기소자를 보호하는 보호막이 필요하다. 유기소자는 산소 및 수분에 매우 취약하기 때문에 장수명을 확보하기 위해서는 추가적인 보호층이 필요하다. 본 논문에서는 이를 위해 Encapsulation 중 한 방법인 Barrier Film을 제작하고 그에 따른 광학적인 특성 및 수분 투습율을 조사하였다. Barrier film의 광학적 분석 방법으로는 XPS, SEM, AFM, Transmittance를 측정하였으며, XPS는 박막내의 화학적인 결합을 알기 위해서 사용되었고, SEM은 박막의 두께 및 박막내의 결함을 파악하고자 하였다. SEM을 통해 증착속도가 32.6 nm/m이라는 것을 관찰할 수 있었다. AFM을 통해 증착된 박막의 표면 거칠기를 파악하였다. Transmittance는 PET 기판을 사용하여 가시광 영역에서 80%이상의 투과도를 나타내었다. PECVD 장비를 사용하여 SiH4, NH3, N2가스를 사용하여 PET 필름 위에 박막을 증착하였으며, 유량을 10~400 sccm 내에서 변화시키고, RF Power는 각각 30~300 W 15분간 증착하였다. 제작된 보호막의 수분투습율은 $2{\times}10{_2}^{-2}g/m^2/day$ 이하의 값을 나타내었다.

• 한국재료학회지
• /
• 제21권5호
• /
• pp.255-262
• /
• 2011

This paper has relatively high technical standard and experimental skill. The fabrication of TCO film with high transparency, low resistance and low chromaticity require exact control of several competing factors. This paper has resolved these problems reasonably well, thus recommended for publication. Indium tin oxide(ITO) thin films were by D.C. magnetron roll-to-roll sputter system utilizing ITO and $SiO_2$ targets of ITO and $SiO_2$. In this experiment, the effect of D.C. power, winding speed, and oxygen flow rate on electrical and optical properties of ITO thin films were investigated from the view point of sheet resistance, transmittance, and chromaticity($b^*$). The deposition of $SiO_2$ was performed with RF power of 400W, Ar gas of 50 sccm and the deposition of ITO, DC power of 600W, Ar gas of 50 sccm, $O^2$ gas of 0.2 sccm, and winding speed of 0.56m/min. High quality ITO thin films without $SiO_2$ layer had chromaticity of 2.87, sheet resistivity of 400 ohm/square, and transmittance of 88% and $SiO_2$-doped ITO Thin film with chromaticity of 2.01, sheet resistivity of 709 ohm/square, and transmittance of more than 90% were obtained. As a result, $SiO_2$ was coated on PET before deposition of ITO, their chromaticity($b^*$) and transmittance were better than previous results of ITO films. These results show that coating of $SiO_2$ induced arising chromaticity($b^*$) and transmittance. If the thickness of $SiO_2$ is controlled, sheet resistance value of ITO film will be expected to be better for touch screen. A four point probe and spectrophotometer are used to investigate the properties of ITO thin films.

• 한국안광학회지
• /
• 제14권1호
• /
• pp.17-21
• /
• 2009

목적: 국산 주문용 시력보정 렌즈의 국제규격에 따른 품질을 평가하고, 분석하였다. 방법: 국내시장에서 유통되고 있는 국내 브랜드의 주문용 렌즈들을 대상으로 굴절력, 중심두께, 투과율을 측정하고, 국제규격에 따라 외국브랜드 제품과 비교, 분석하였다. 결과: 국산 제품들 중 국제규격의 허용기준에 맞지 않는 경우가 1제품 있었지만 굴절력, 투과율에서 대부분 우수한 특성을 보였다. 결론: 국내외 시장에서 외국제품들보다 더 높은 선호도를 가지기 위해 렌즈제조업체의 더 강화된 품질관리와 마케팅 전략이 필요하다.

• 한국응용과학기술학회지
• /
• 제33권3호
• /
• pp.483-491
• /
• 2016

나노실리카가 코팅된 유리 표면은 나노실리카 표면에 존재하는 친수성 수산기로 인해 방담성이 매우 증가하나, 실외에 설치된 유리에 코팅된 경우는 비에 의해 씻겨 나가 방담 특성의 내구성이 급격히 감소한다. 또한 나노실리카가 코팅된 유리 표면의 토폴로지는 광투과율 또는 반사방지 특성을 좌우하는 매우 중요한 인자이다. 이러한 나노실리카 코팅의 특성에 관한 내구성을 향상시키기 위하여 가교제로 테트라에틸오르소실리케이트 (TEOS)를 사용하여 나노실리카 (Ludox) 현탁액으로 친수성 나노실리카피막을 제조하였다. 산성 또는 염기성 수용액 중에서의 TEOS의 가수 분해 최적 조건도 물에 대한 접촉각 측정을 통하여 조사하였다. pH=4의 산성 조건에서 1.5 wt% 나노실리카-TEOS 코팅액으로 얻은 최종 투명한 친수성 코팅층은 매우 향상된 친수성에 대한 내구성뿐만 아니라, 코팅하지 않은 유리에 비해 약 2 % 포인트 정도 높은 가시광투과율을 나타내었다.

• 한국재료학회지
• /
• 제24권12호
• /
• pp.689-693
• /
• 2014

Anti-reflection coating films have used to increase the transmittance of displays and enhance the efficiency of solar cells. Hydrophobic anti-reflection coating films were fabricated on a glass substrate by sol-gel method. To fabricate an anti-reflection film with a high transmittance, poly ethylene glycol (PEG) was added to tetraethyl orthosilicate (TEOS) solution. The content of PEG was changed from 1 to 4 wt% in order to control the morphology, thickness, and refractive index of the $SiO_2$ thin films. The reflectance and transmittance of both sides of the coated thin film fabricated with PEG 4 wt% solution were 0.3% and 99.4% at 500 nm wavelength. The refractive index and thickness of the thin film were n = 1.29 and d = 105 nm. Fluoro alkyl silane (FAS) was used for hydrophobic treatment on the surface of the anti-reflection thin film. The contact angle was increased from $13.2^{\circ}$ to $113.7^{\circ}$ after hydrophobic treatment.