• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.2
• /
• pp.92-101
• /
• 2012

In this paper, we propose a distributed transmit power control algorithm for optimal end-to-end throughput in wireless multihop networks. Considering a solidarity property of link rates consisting of a multihop link and the fact that the multihop end-to-end throughput is determined by the minimum link rate, the proposed scheme controls the transmit power to make all link rates be equal and so maximizes the end-to-end throughput of multihop link. In addition, in the proposed scheme the transmit node calculates its transmit power autonomously in a distributed manner just through the information sharing with its neighbor nodes and so decreases the information sharing overhead. Simulation results show that the proposed scheme achieves significant improvements in terms of end-to-end throughput and power consumption compared with the conventional maximum equal power allocation scheme.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.349-350
• /
• 2016

In the magnetically coupled wireless power transmit (WPT), the study of the multi-dimensional transmission coil to solve the low power transmission efficiency from the location of transmit coil and receiving coil is being developed. This paper, an important step in this study, presents the magnetically coupled model of the WPT system consist of the two-dimensional transmit coil and verifies by the simulation and experiment. The induced model in this paper can be used to design the WPT circuit and controller for the maximum transmission efficiency.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.1
• /
• pp.260-279
• /
• 2015

In this paper, we investigate physical layer security for multiple decode-and-forward (DF) relaying underlay cognitive radio networks (CRNs) with fixed transmit power at the secondary network against passive eavesdropping attacks. We propose a simple relay selection scheme to improve wireless transmission security based on the instantaneous channel information of all legitimate users and the statistical information about the eavesdropper channels. The closed-form expressions of the probability of non-zero secrecy capacity and the secrecy outage probability (SOP) are derived over independent and non-identically distributed Rayleigh fading environments. Furthermore, we conduct the asymptotic analysis to evaluate the secrecy diversity order performance and prove that full diversity is achieved by using the proposed relay selection. Finally, numerical results are presented to verify the theoretical analysis and depict that primary interference constrain has a significant impact on the secure performance and a proper transmit power for the second transmitters is preferred to be energy-efficient and improve the secure performance.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.2
• /
• pp.285-290
• /
• 2010

We investigate the outage probability in terms of QoS (quality of service) in indoor PLC network. We consider various kinds of appliances for realistic indoor PLC network. For estimation of the outage probability, we calculate the time-varying channel responses considering the loading conditions based on regular human activities and include the additive noise. We calculate the outage probability for each terminal and investigate relationship between the outage probability and the channel length, and transmit powers. Our results suggest that the outage probability is increased when the channel length becomes longer because more appliances affect the amount of reduced channel capacity and is not improved distinctly for very high and low outage threshold by increasing the transmit power. However, we can see outage probability improvement for 30% outage threshold case by increasing the transmit power.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.3
• /
• pp.25-33
• /
• 2008

In this paper, the transmit power minimization for Poisson distributed wireless ad-hoc relay networks in Rayleigh fading channels is considered. We investigate two power allocation methods one is a minimum power allocation (MPA) strategy and the other is an equal outage power allocation (EOPA) strategy. We analyze the total transmit power of two allocation methods under the given end-to-end outage probability constraint. Our results show that the MPA achieves more power saving than EOPA, and the power saving is more significant as the number of relay nodes increases.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.4
• /
• pp.200-205
• /
• 2011

In multipath fading channel, diversity is essential to mitigate the impairments. In this paper, we have proposed the angle diversity scheme called ATTD(Angle Time Transmit Diversity) instead of Alamouti's STTD(Space Time Transmit Diversity) and have analyzed the performance of the proposed scheme when signal powers caused by the transmission to different angles are different. Based on it, we have measured the wireless vector-channel in the urban area, which has lots of high-story buildings, using the data collected from the 8 by 4 smart array antenna system that we made. According to the measured data, the received signals from different angles have different signal powers. Our performance analysis results show that the proposed scheme has better performance than the space diversity scheme when the received path signal power is at least -7dB compare to the strongest path signal power.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.9
• /
• pp.41-47
• /
• 2017

In this paper, we consider the case where D2D users and the cellular user share the uplink of the cellular system. We propose an iterative power control algorithm that converges to the optimum power value. Each user iteratively updates its transmit power level according to the interference function. Finally, all D2D users and cellular user that participate in the transmission get the optimum transmit power level. We first investigate the interference structure and define the interference function. Then, we show that the considered interference function belongs to the standard interference function that converges the unique transmit power level. Through numerical examples, the convergence of the proposed power control algorithm is examined in the various transmission scenarios.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.9
• /
• pp.685-697
• /
• 2017

In this paper, it is presented the result of design and fabrication for C-band solid state high power amplifier unit and components using in search radar. The solid state power amplifier(SSPA) assembly was fabricated using GaN(Gallium Nitride), which is semiconductor device, and the transmit signal output power of the solid state high power amplifier unit is generated by combining the transmit signal power of the solid state power amplifier configured in parallel through a design and fabricated waveguide type transmit signal combine assembler. Designed solid state high power amplifier unit demonstrated C-band 500 MHz bandwidth, maximum 10.5% duty cycle, transmit pulse width from $0.0{\mu}s{\sim}000{\mu}s$, and transmit signal power is 44.98 kW(76.53 dBm).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.12
• /
• pp.1155-1164
• /
• 2011

In this paper, we proposed the transmit beam measurement method of active phased array antenna, which is installed in Korea's first developed naval medium range radar, using near-field measurement facility. The pulse-mode high power characteristics of active phased array antenna's trasmit-beam make it difficult to measure with general near-field measurement facilities where low power continuous RF signals are used. Thus, in this paper, the measurement method of active phased array antenna's transmit beam in conjunction with the near-field measurement facility, which is suitable for the high-power transmit beam measurement, and PNA-X network analyzer(Agilent Technologies), which can support pulse-mode measurement, was proposed and measured by near-field measurement techniques. And the EIRP(Effective Isotropic Radiated Power), the transmit characteristic of active phased array antenna, was measured by the near field measurement techniques and compared to numerical estimation which was nearly equal with small difference of 0.1 dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.214-220
• /
• 2006

In this paper, we propose the transmit power controlled adaptive modulated OFDM with frequency symbol spreading and equalization(TPC-AMS/FSS-OFDM) system. In the transmitter of the TPC-AMS/FSS-OFDM, each SP transformed signal is spread by orthogonal spreading codes and combined, so the detected signals obtain the same SINR(signal interference to noise ration) for each frequency symbol spreading block. In this case, we can assign the same modulation level and transmit power for each frequency symbol spreading block. Thus, the proposed system provides the increased throughput performance with reducing the total transmit power, FBI and MLI.