• 산업공학
• /
• 제15권1호
• /
• pp.99-106
• /
• 2002

A recently developed alternative to traditional production planning and control systems such as material requirement planning(MRP) and just-in-time(JIT) is the drum-buffer-rope(DBR). The DBR now being implemented in growing number of manufacturing organizations enables better scheduling and decision making on the shop floor. In implementing the DBR, however, an information system is usually needed to transmit the signal that runs from the constraint to material release. In this paper we propose a different mechanism to transmit the signal in the case that the demand of product is stable, which uses the well-known Kanban system. To improve the reality, this paper shows and example of the Kanban format, its operation, and calculation of the number of Kanbans.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권7호
• /
• pp.2338-2353
• /
• 2015

In this paper, the optimal power allocation algorithm that minimizes the aggregate bit error rate (BER) of the secondary user (SU) in a downlink orthogonal frequency division multiplexing (OFDM) based cognitive radio (CR) system, while subjecting to the interference power constraint and the transmit power constraint, is investigated under the assumption that the instantaneous channel state information (CSI) of the interference links between the secondary transmitter and the primary receiver, and between the primary transmitter and the secondary receiver is perfectly known. Besides, a suboptimal algorithm with less complexity is also proposed. In order to deal with more practical situations, we further assume that only the channel distribution information (CDI) of the interference links is available and propose heuristic power allocation algorithms based on bisection search method to minimize the aggregate BER under the interference outage constraint and the transmit power constraint. Simulation results are presented to verify the effectiveness of the proposed algorithms.

• 대한의용생체공학회:의공학회지
• /
• 제29권4호
• /
• pp.267-271
• /
• 2008

The RF shimming technique has been used to improve the transmit RF field homogeneity in highfield MRI. In the RF shimming technique, the amplitude and phase of the driving currents in each coil element are optimized to get homogenous flip angle or uniform image intensity. The inductive and capacitive coupling between the coil elements may degrade the RF field homogeneity if not taken into account in the optimization procedure. In this paper, we have analyzed the coupling effects on the RF shimming using a sixteen-element TEM RF coil model operating at 300 MHz. We have found that the coupling effects on the RF shimming can be reduced by putting high dielectric material between the active rung and the shield.

• 한국멀티미디어학회논문지
• /
• 제20권12호
• /
• pp.1849-1855
• /
• 2017

The main purpose of cooperative communications is improvement of communication quality and efficient use of transmission power. In this paper, a cooperative retransmission method is proposed, where neighbor nodes that receive messages correctly between transmit and receive nodes will participate in retransmission of the erroneous packet of the direct link. When the proposed retransmission method is used, the performance of the PER can be greatly improved. In case that the limited information is included in the NACK message, the transmit power of the retransmission packet can be reduced using the proper power control method.

• 한국통신학회논문지
• /
• 제27권3C호
• /
• pp.241-247
• /
• 2002

본 논문에서는 여러 개의 첩 광섬유 격자( Chirped fiber gratings CFGs )와 한 개의 파장 가변광원을 이용하 연속적으로 빔의 주사 방향을 조정할 수 있는 송신용 선형 위상배열 안테나용 실 시간지연 선로를 제안하였다. L-밴드, S-밴드 그리고 X-밴드에서 측정된 CFG의 평균 군 지연 기울기는 177 ps/nm이었다. 최대 빔 주사각을 180$^{\circ}$로 설계한 4개의 안테나 소자로 구성된 10 GHz 송신용 선형 위상배열 안테나 구조에서 전산 모의 실험 결과로 얻은 최대이득은 11.6 dB로 나타났다.

• Journal of Communications and Networks
• /
• 제5권2호
• /
• pp.167-173
• /
• 2003

We treat the problem of channel estimation and interference cancellation in multiuser ultra-wide-band (UWB) communication systems over multipath fading channels. The UWB system under consideration employs a random time-hopping impulse radio format. We develop a channel estimation method based on linear weighted algorithm. An iterative channel estimation and interference cancellation scheme is proposed to successively improve the receiver performance. We also consider systems employing multiple transmit and/or receive antennas. For systems with multiple receive antennas, we develop a diversity receiver for the wellseparated antennas. For systems with multiple transmit antennas, we propose to make use of Alamouti’s space-time transmission scheme, and develop the corresponding channel estimation and interference cancellation receiver techniques. Simulation results are provided to demonstrate the performance of various UWB receiver techniques developed in this paper.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.113-117
• /
• 1995

The mechanism of the displacement current generation for stimulation transmit observed in the present displacement current measurement and theoretically analysed. The orientational change of molecules in monolayers was discussed on the basis of the Maxwell-displacement-current obtained. Maxwell displacement current was generated from monolayers on a water surface by monolayerr compression, and it measuring technique has been applied to the study of monolayers of Dipalmitoylphosphatidyl choline (L-${\alpha}$-DPPC). Finally, We measured that differential thermal analysis(DTA) of sample. Displacement current was generated when the area per molecule about 180${\AA}$$^2$in low pressure, and it was generated when the area per molecule about 110${\AA}$$^2$in high pressure. A result of DTA was showed that temperature at 124.6$^{\circ}C$.

• 대한전자공학회논문지
• /
• 제27권5호
• /
• pp.767-774
• /
• 1990

Successive images can be reconstructed without great degradation by using one codebook in vector quantization, because statistics of successive images are sinilar. In this paper, we propose a method to update vector centroids in one slot of an image sequence and reconstruct images with the codebook replenished with the updated vector centroids. To remove the overhead required to transmit the updated vector centroids, we catagorize image blocks into changing blocks and nonchanging blocks, and then transmit only the labels of the changing blocks. Therefore, we can assign the remaining bits to the replenishment of a codebook. By the proposed method, almost the same image as the same image as the one reconstructed by LBG algorithm can be obtained and the bit rate can be reduced to below 0.5 bit/pixel.

• The Journal of the Acoustical Society of Korea
• /
• 제21권3E호
• /
• pp.140-145
• /
• 2002

This paper introduces the downlink Eigen-beamformer with Space-Time Block Code (STBC)[1,2] employed on the MISO (Multiple Input Multiple Output) systems. The proposed scheme is acquired both transmit diversity gain from STBC and beamforming gain from Eigen-beamformer. In general, it is well described that the diversity gain be maximized when channel parameters associated to fingers are mutually independent. Major role of utilizing Eigen-beamformer is to enforce channel parameters being uncorrelated. According to this, the proposed STBC combined with Eigen-beamformer on the downlink significantly improves its performance under the spatially correlated channel. Simulation results are accomplished under three distinct channels conditioned with varying the degree of their correlations. The result indicates that our proposed scheme is good performance in spatially correlated channel.

• 전자공학회논문지
• /
• 제50권1호
• /
• pp.97-101
• /
• 2013

There is a growing need for optical communication systems that convert large volumes of data to optical signals and that accommodate and transmit the signals across long distances. Digital optical communication consists of a master unit (MU) and a slave unit (SU). The MU transmits data to SU using digital optical signals. However, digital optical units that are commercially available or are under development transmit data using two's complement representation. At low input levels, a large number of SSOs (simultaneous switching outputs) are required because of the high rate of bit switching in two's complement, which thereby increases the power noise. This problem reduces the overall system capability because a DSP (digital signal processor) chip (FPGA, CPLD, etc.) cannot be used efficiently and power noise increases. This paper proposes a change from two's complement to a more efficient method that produces less SSO noise and can be applied to existing digital optical units.