This study was designed to observe the ultrastructural localization of synoviocytes, which are concerned with the function of phagocytic synovial cells (type A synoviocytes, macrophage-like synoviocytes), in the knee joint of the human for CD14 and CD105 by cryo-immune-electron microscopic technique. The synovium were dissected and fixed for two hours (in 4% paraformaldehyde and 0.1% glutaraldehyde mixture), and were immerged in 2.3 M sucrose and 20% PVP solution. Finally, they were cut with the cryoultramicrotome and labelled with primary antibodies (monoclonal mouse anti-human CD14, monoclonal mouse anti-human CD105 (endoglin) and secondary (donkey anti-mouse IgG) tagged with 6 nm colloidal gold particles. The tissues were observed under transmission electron microscope. This study was resulted as follows. 1. In the synovium of the human knee joint, CD14+ cells were identified. These cells showed phagocytic synovial cell's features. In the phagocytic synoviocyte, the distributions of CD14 were marked in the cytoplasm, around vacuoles, and in cytoplasmic process, but not detected inside of vacuoles. 2. In the synovium of the human knee joint, CD105+ cells were identified. These cells were recognized endothelial cells and phagocytic synovial cells. In the phagocytic synovial cells, the distributions of CD105 (endoglin) were marked in cytoplasic process, around vacuoles, and in cell membrane, but not detected inside of vacuoles. On the basis of above findings, it is obvious that phagocytic synovial cells were marked at CD 14 and CD 105, and might be play the role of activated macrophages or phagocytes in the synovial membrane.
We prepared a new a SOS(silicon-on-silicide) wafer pair which is consisted of Si(100)/1000$\AA$-NiSi Si (100) layers. SOS can be employed in MEMS(micro- electronic-mechanical system) application due to low resistance of the NiSi layer. A thermally evaporated $1000\AA$-thick Ni/Si wafer and a clean Si wafer were pre-mated in the class 100 clean room, then annealed at $300~900^{\circ}C$ for 15hrs to induce silicidation reaction. SOS wafer pairs were investigated by a IR camera to measure bonded area and probed by a SEM(scanning electron microscope) and TEM(transmission electron microscope) to observe cross-sectional view of Si/NiSi. IR camera observation showed that the annealed SOS wafer pairs have over 52% bonded area in all temperature region except silicidation phase transition temperature. By probing cross-sectional view with SEM of magnification of 30,000, we found that $1000\AA$-thick uniform NiSi layer was formed at the center area of bonded wafers without void defects. However we observed debonded area at the edge area of wafers. Through TEM observation, we found that $10-20\AA$ thick amourphous layer formed between Si surface and NiSix near the counter part of SOS. This layer may be an oxide layer and lead to degradation of bonding. At the edge area of wafers, that amorphous layer was formed even to thickness of $1500\AA$ during annealing. Therefore, to increase bonding area of Si NiSi ∥ Si wafer pairs, we may lessen the amorphous layers.
Variable Message Sign (VMS), which provides drivers with direct information about state of traffic congestion and for prevent an accident, is the most effective method among the methods of providing information in Advanced Transportation Management System. Currently establishment and the VMS which is operated foundation lets in Guidelines on the use of Variable message sign (a book of the VMS) of 1999 November the Ministry Construction & Transportation, these contents mean main viewpoint on physical part such as message special quality variable (font, character size and line space, word interval) and position mainly among standard about establishment in general. But, it is true that using without effect verification on the character of VMS display and that using mode of stationary-centered. In this paper, it executed significance test to effort verification on the character of VMS display for more practical and effective information transmission based on the driver viewpoint For the researches; develop 3D-Simulation, select characteristics of driver's visual cognition behavior (the conspicuity, the legibility and the comprehensibility), evaluation each issue (day or night, 80km/h or 100km/h). Especially, that used the Eye Marker Recorder to measure of reading-time (legibility) thus, confirmed objectivity and reduce an observational error. The results showed that the conspicuity is Flashing> Stationary>Scroll. The legibility is not deference that Flashing between stationary form. Also the comprehensibility result showed that Flashing> Stationary>Stroll form.
Proton therapy facility, which is recently installed at National Cancer Center in Korea, generally produces a large amount of radiation near cyclotron due to the secondary particles and radioisotopes caused by collision between proton and nearby materials during the acceleration. Although the level of radiation by radioisotope decreases in length of time, radiation exposure problem still exists since workers are easily exposed by a low level of radiation for a long time due to their job assignment for maintenance or repair of the proton facility. In this paper, the working environment near cyclotron, where the highest radiation exposure is expected, was studied by measuring the degree of radiation and its duration for an appropriate level of protective action guide. To do this, we measured the radiation change in the graphite based energy degrader, the efficiency of transmitted beam and relative activation degree of the transmission beam line. The results showed that while the level of radiation exposure around cyclotron and beam line during the operation is much higher than the other radiation therapy facilities, the radiation exposure rate per year is under the limit recommended by the law showing 1~3 mSv/year.
Journal of the Korean Institute of Landscape Architecture
/
v.45
no.3
/
pp.116-128
/
2017
In this study, the original scenery of Baegun-dong Garden in Gangjin was compared with that of the reconstructed site to suggest directions for restoration in the future. The diachronic prototype scenery of the Baegun-dong Garden was derived by integrating the elements of the original and contemporary prototype sceneries from the old poetry series. The old poetry series is comprised of "Baegun-dong 8Yeong(詠)" by Lee Damro(李聃老), "Baegun-dong 10Su(首)" by Song Ikhwi(宋翼輝), "Baegun-dong 12Gyeong (景)" by Jeong Yakyong(丁若鏞), and "Baegun-dong 14Gyeong" by Lee Siheon (李時憲). Guidance for directions for future restoration was suggested through a comparative analysis between the diachronic prototype scenery of Baegun-dong Garden and the current scenery of the restored site. The research result is as follows. First, the prototype scenery of Baegun-dong Garden was a harmonic view composed of the camellia forest road, 'Baegun-dong' the letter carved on a rock, a cliff 'Changhabyeok(蒼霞壁)' the red letter written by Jeong Yakyong, paulownia trees, waterfalls and a maple forest. Outside the Byeolseo(別墅), there were a red plum blossom forest, a pine forest, and a bamboo forest, as well as the view of Okpanbong(玉版峯) from Jeongseondae(停仙臺). In the yard, there were Chwimiseonbang(翠微禪房), Jug-gak(竹閣), Pyeongsang(榻), a lotus Bangji(方池), Gogsugeo(曲水渠) and Hwagye(花階). Cranes were even raised in the yard. Second, comparing the diachronic prototype scenery of Baegun-dong Garden with its restored site, following a restoration guide is suggested. There should be more water flow in Baegun-dong Valley and Jug-gak should be restored. 'Changhabyeok' the red letter should be carved on the stone wall. Trees should be controlled for a better view of Okpanbong from Jeongseondae. More trees and plants, such as red plum blossom, pine tree, paulownia trees, azaleas(映山紅), chrysanthemum, orchid, daffodil, and lotus should be planted in the yard. A system of integrated guide boards is also required for effective information transmission for visitors.
Kang, Shin Myung;Lee, Jun Gu;Chung, Jae Ho;Han, Chang Hoon;Byun, Min Kwang;Chung, Wou Youn;Park, Moo Suk;Kim, Young Sam;Kim, Se Kyu;Chang, Joon;Kim, Sung Kyu
Tuberculosis and Respiratory Diseases
/
v.60
no.3
/
pp.277-284
/
2006
Background : Delayed treatment of pulmonary tuberculosis is an important problem because it results in greater mortality and the nosocomial transmission of tuberculosis. This study was conducted to analyze the factors that contribute to the delayed treatment of pulmonary tuberculosis in a university hospital and we wanted to provide basic data for instituting an effective management program for tuberculosis. Methods : we retrospectively reviewed the medical records of 155 patients with smear-positive or culture-positive pulmonary tuberculosis and who were treated between May 1999 and October 1999. A case-control study was performed to analyze the factors. We then tried to follow up the patients in delayed treatment group via telephone for the purpose of assessing the therapeutic interventions. Results : Among 150 patients, 55 (37%) were included in the delayed treatment group. The factors associated with delayed treatment on the univariate analysis included age (61 vs 40 years old; p <0.001), a smear-negative sputum test for acid-fast bacilli (AFB) (85% vs 55%; p <0.001) and no visits to a private clinic before the patient presented to the university hospital (56% vs 36%; p = 0.014). Multivariate analysis revealed that old age (p = 0.001), a smear-negative sputum for AFB (p = 0.001), and lower lobe infiltrate on chest X-ray (p = 0.041) were the independent predictors of delayed treatment. Of the 22 patients who did not receive any treatment, 20 of them 91%) consented to our suggestion of revisiting the hospital. Conclusion : Delayed treatment of patients with pulmonary tuberculosis is not uncommon in a university hospital. Old age, smear-negative for AFB, and lower lobe infiltrate on chest X-ray are the risk factors for delayed treatment. A more systematic management system is required for achieving better control of tuberculosis.
Han, Myung-Sae;Park, Hyun-Ro;Han, Sang-Mi;Nam, Ki-Soo;Kwon, Soon-Ha;Lim, Jong-Sung;Nguyen, Mau Tuan
Journal of Sericultural and Entomological Science
/
v.41
no.1
/
pp.20-28
/
1999
Color qualities investigated on the basis of Munsell code and Korean standard color code for the cocoons from various strain of mulberry silkworm, Bombyx mori. 16 of different color qualities were identified from 21 of original silworm strains, and determinated international name with the revision of Korean color name for cocoon. The various cocoon color confirmed on the sphere from 567 to 593 nm wavelength, 78% of those located at the region about 580 nm (575~584) of sensitive "color difference limen". Y gene engaged broad ranges of wavelength (575~593 nm) in the color expression, by contrast with other genes of Pk (593 nm), F (584~593), Grc and relative G group (567~570 nm), on the transmission of carotenoid or flavonoid color substance. YC gene expression by original silk worm strain was also distinguished by those variation of specific yellow than other colors from Grc, GaGb, Gc, and YPkF. Appearance of chrome yellow cocoon was dominant than other yellow in the cross among vivid yellow group. F1 of pin${\times}$green produced the cocoon of yellow such as "additive mixture" as color light, however, most of the hybrid between yellow cocoon showed the color similar to "subtractive mixture" as a mixture of dyestuff. Hybrid cocoons among yellow or green colors were decreased their hue, value, and chroma, than those of parent. Diallel cross among the strain of various green cocoon suggest the existence of Grc, Ga, Gb, Gc genes. Cream colored cocoon of B. mandarina was differed from other yellow cocoon of Bobyx mori B. mori. Y$^A$ with Ymc showed the similar role of Y with C, therefore, segregated yellow cocoon from the B. mori${\times}$B. mandarina (+$^YC/Y^AYmc$). YC expression of $Y^AY$mc genes might be suppressed by deficiency of outer layer sericin on the middle division of silk giand in the B. mandarina.
Purpose : Multileaf collimator(MLC) is very suitable tool for conformal radio-therapy and commissioning measurements for a multileaf collimator installed on a dual energy accelerator with 6 and 10MV photons are required, For modeling the collimator with treament planning software, detailed dosimetric characterization of the multileaf collimator including the penumbra width, leaf transmission between leaf leakage and localization of the leaf ends and sides is an essential requirement. materials and Methods : Measurement of characteristic data of the MLC with 26 pair block leaves installed on CLINAC 2100C linear accelerator was performed. Low sensitive radiographic film(X-omatV) was used for the penumbra measurement and separate experiments using radiographic film and thermoluminescent dosimeters were performed to verify the dose distribution, Measured films were analized with a photodensitometer of WP700i scanner. Results : For 6 & 10 MV x-ray energies, approximately $2.0\%$ of photons incident on the multileaf collimator were transmitted and an additional $0.5\%$ leakage occurs between the leaves. Localizing the physical end of the leaves showed less than 1mm deviation from the $50\%$ decrement line and this difference is attributed to the curved shaped end on the leaves One side of a sin히e leaf corresponded to the $50\%$ decrement line, but the opposite face was aligned with a lower value. This difference is due to the tongue and groove used to decrease between leaf leakage. Alignment of the leaves to form a straight edge resulted larger penumbra at far position from isocenter as compare with divergent alloy blocks. When the MLC edge is stepped by sloping field, the isodose lines follow the leaf pattern and Produce scalloping isodose curves in tissue. The effective penumbra by 45 degree stepped MLC is about 10mm at 10cm depth for 6MV x-ray. The difference of effective penumbra in deep tissue between MLC and divergent alloy blocks is small (5mm). Conclusion : Using the characteristic data of MLC, the MLC has the clinlical acceptability and suitability for 3-D conformal radiotherapy except small field size.
Proceedings of the Korea Society of Poultry Science Conference
/
2003.07b
/
pp.37-54
/
2003
It has been recognized that the hen. like its mammalian counterparts. provides young chicks with antibodies as protection against hostile invaders. This system facilitates the transfer of specific antibodies from serum to egg yolk. and provides a supply of antibodies called immunoglobulin Y(IgY) to the developing embryo and the hatched chick. The protection against pathogens that the relatively immuno-incompetent newly hatched chick has. is through transmission of antibodies from the mother via the egg. Egg yolk. therefore. can be loaded with a large amount of IgY against pathogens which can immobilize the existing or invading pathogens during the embryo development or in day-old chicks. Thus. the immunization of laying hens to various pathogens results in production of different antigen-specific IgY in eggs. Egg yolk contains 8~20 mg of immunoglobulins (IgY) per $m\ell$ or 136~340 mg per yolk suggesting that more than 30 g of IgY can be obtained from one immunized hen in a year. By immunizing laying hens with antigens and collecting IgY from egg yolk. low cost antibodies at less than $10 per g compared to more than $20.000 per g of mammalian IgG can be obtained. This IgY technology opens new potential market applications in medicine. public health veterinary medicine and food safety. A broader use of IgY technology could be applied as biological or diagnostic tool. nut-raceutical or functional food development. oral-supplementation for prophylaxis. and as pathogen-specific antimicrobial agents for infectious disease control. This paper has emphasized that when IgY-loaded chicken eggs are produced and consumed. the specific antibody binds. immobilizes and consequently reduces or inhibits the growth or colony forming abilities of microbial pathogens. This concept could serve as an alternative agent to replace the use of antibiotics. since today. more and more antibiotics are less effective in the treatment of infections. due to the emergence of drug-resistant bacteria.
GRP was known as the modulator of Pain transmission in central nervous system and local effector to peripheral tissue causing vasodilation, increased blood flow, modulation of immune sysem, stimulation of endothelial cell proliferation, and stimulation of bone formation. Numerous study, therefore, were done to elucidate involvement of CGRP to tooth movement. To investgate the response of CGRP immunoreactive nerve cells according to cell size in trigeminal ganglion during tooth movement, immunohistochemical study was performed using rat. Experimental rats(9 weeks old, 210 gm) were divided as six groups(normal(n=6), 3 hour group(n=5), 12 hour group(n=4), 1 day group(n=5), 3 day group(n=5), 7 day group(n=5)), and were applied orthodontic force (approximately 30 gm) to upper right maxillary molar. After frozen sections of trigeminal ganglions were immunostained using rabbit antisera, the changes of CGRP immunoreactive cells in regard to cell size distribution(small cell(upto $20{\mu}m$), medium cell($20-35{\mu}m$), large cell(above $35{\mu}m$)) were observed. The results were as follows 1. The percentage of CGRP immunoreactive cells to all nerve cells in trigeminal ganglion was 33.0% in normal control group, was decreased to 24.5% in 1 day group, and was increased to 41.8% in 7 day group. 2. The percentage of small, medium, and large cells expressing CGRP immunoreactivity in normal trigeminal ganglion to all CGRP immunoreactive cells were 51.3%, 44.0%, 4.7%, respectively. 3. The percentage of small cells with CGRP immunoreactivity to all CGRP immunopositive cells was increased in 3 hour and 12 hour groups. 4. The percentage of medium cells with CGRP immunoreactivity was increaed in 3 day and 7 day groups. 5. The percentage of large cells with CGRP immunoreactivity was increaed in 7 day group. Conclusively, the small cells with CGRP immunoreactivity in trigeminal ganglion respond to orthodontic force during initial phase of tooth movement, and later the medium and large cells with CGRP immunoreactivity respond
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.