• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.5
• /
• pp.555-564
• /
• 2016

This paper proposes a time slot allocation scheme for military patrol environments. This proposal comes from analysis of traffic properties in a military patrol environment. In the near future, robots are expected to explore enemy grounds and measure threat, taking the place of human patrol. In order to control such robots, control messages must be extremely accurate. One mistake from the control center could cause a tragedy. Thus, high reliability must be guaranteed. Another goal is to maintain a continual flow of multimedia data sent from patrol robots. That is, QoS (Quality of Service) must be guaranteed. In order to transmit data while fulfilling both attributes, the per-path based centralized TDMA slot allocation scheme is recommended. The control center allocates slots to robots allowing synchronization among robots. Slot allocation collisions can also be avoided. The proposed scheme was verified through the ns-3 simulator. The scheme showed a higher packet delivery ratio than the algorithm in comparison. It also performed with shorter delay time in the downlink traffic transmission scenario than the algorithm in comparison.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.17-23
• /
• 2020

This paper proposes a simulation model using an equivalent circuit for the development of an MMC system. The MMC has been chosen as the most suitable topology for high voltage power transmission, such as a voltage-type HVDC, and it has dozens to hundreds of sub-modules in the form of a half-bridge or full-bridge connected in series. A simulation study is essential for the development of an MMC algorithm. On the other hand, it is virtually impossible to construct and implement MMC simulation models, including hundreds or thousands of switching devices. Therefore, this paper presents an MMC equivalent model, which is easily expandable and implemented by modeling the dynamic characteristics. The voltage and current equation of the equivalent circuit was calculated using the direction of the arm current and switching signal. The model was implemented on Matlab/Simulink. In this paper, to show the validity of the model developed using Matlab/Simulink, the simulation results of a five-level MMC using the real switching element and the proposed equivalent model are shown. The validity of the proposed model was verified by showing that the current and voltage waveform in the two models match each other.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.1
• /
• pp.15-20
• /
• 2002

The Hydroxyethyl methacrylate(HEMA) was developped in 1960's and later the use of contact lenses increased. At present more and more people use RGP contact lenses. Due to the wide range of optical corrections available and due to their high oxygen transmission Japanese and Korean people like them. Nevertheless one of nine CL users(beginners) stopped wearing the CL within the first year. We conducted a survey to evaluate the level of patient compliance in lens care and maintenance and to assess practitioner knowledge of contact lens information. Generally 6% of contact lens wearers drop out per year. The aim of this research was to find out what opticians can do to reduce the drop-out rate by getting information on handling, on general data of the patient and on optical prescription. Lens wearer were asked to complete a 10 question survey that focused on lens care-wear modality, lens replacement, storage, symptoms and case disinfection. There were total 180 participants in the study. Most of contact lens wearers have an inadequate understanding of contact lens care system. Therefore, it is important that contact lens specialists place more emphasis on practitioner education about general contact lens fields and reinforce patient education during the dispensing visit.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.6
• /
• pp.553-558
• /
• 2011

This paper describes the development and test result of S-band Transmitter flight model(FM) of STSAT-3 by satellite research center(SaTReC), KAIST. The communication sub-system of STSAT-3 is consist of two different frequency band channels, S-band for Telemetry & Command and X-band for mission data. S-band Transmitter(STX) functionally made of modulator, frequency synthesizer, power amp and DC/DC converter. The transmission data is modulated by FSK(Frequency Shift Keying) and the interface between spacecraft sub-module and STX is RS-422 standard method. The FM STX is based on modular design. The RF output power of STX is 1.5W(31.7dBm) and BER of STX is under $1{\times}10^{-5}$ which meets the specification respectively. The FM STX is delivered Spacecraft Assembly, Integration and Test(AIT) level through the completion of functional Test and environmental(vibration, thermal vacuum) Test successfully.

• Research in Plant Disease
• /
• v.11 no.2
• /
• pp.193-197
• /
• 2005

The effect of pH on the survival of R. solanacearum and its transmission via roots of tomato in hydroponic culture were studied in laboratory and greenhouse. In laboratory experiment, R. solanacearum could not survive for 24h in nutrient solution with pH of $4{\cdot}0;or\;4{\cdot}5$, while 1, 14, 51 and $62\%$ of inoculum survived at pH $5{\cdot}0,\;5{\cdot}6\;and\;6{\cdot}5$, respectively. When tomato plants were inoculated with R. solanacearum through wounds on the stems, the bacteria moved downward from the inoculation site to the roots and infectious bacteria were released from the roots into the nutrient solution. Of two pH regimes tested in greenhouse nutrient-film technique(NFT) culture, the R. solanacearum population was significantly lower in pH 5.0 than in pH 6.5 in most sampling data. In treatments in which R. solanacearum was introduced by transplanting two root-inoculated plants, significantly move plants developed wilt at pH $6{\cdot}5$(34 out of 48 plants) than at pH 5.0(11 out of 48 plants). In addition, when the bacterium was introduced by transplanting two stem-inoculated plants at pH $6{\cdot}5$, seven out of 24 plants developed wilt.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.1
• /
• pp.31-37
• /
• 2014

The aim of this study was the non-destructive evaluation of bloody eggs using VIS/NIR spectroscopy. The bloody egg samples used to develop the sorting mode were produced by injecting chicken blood into the edges of egg yolks. Blood amounts of 0.1, 0.7, 0.04, and 0.01 mL were used for the bloody egg samples. The wavelength range for the VIS/NIR spectroscopy was 471 to 1154 nm, and the spectral resolution was 1.5nm. For the measurement system, the position of the light source was set to $30^{\circ}$, and the distance between the light source and samples was set to 100 mm. The minimum exposure time of the light source was set to 30 ms to ensure the fast sorting of bloody eggs and prevent heating damage of the egg samples. Partial least squares-discriminant analysis (PLS-DA) was used for the spectral data obtained from VIS/NIR spectroscopy. The classification accuracies of the sorting models developed with blood samples of 0.1, 0.07, 0.04, and 0.01 mL were 97.9%, 98.9%, 94.8%, and 86.45%, respectively. In this study, a novel nondestructive sorting technique was developed to detect bloody brown eggs using spectral data obtained from VIS/NIR spectroscopy.

• Applied Chemistry for Engineering
• /
• v.19 no.5
• /
• pp.554-558
• /
• 2008

$(1-x)SiO_2-(x)TiO_2$ composite fibers with various compositions of $TiO_2$ were prepared by electrospinning their sol-gel precursors of titanium (IV) iso-propoxide (TiP), and tetraethyl orthosilicate (TEOS). The surface morphology and structure of sintered composite fibers were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), simultaneous thermogravimetric analysis-differential scanning calorimetry (TGA-DSC) and Fourier transform infrared spectroscopy (FT-IR). As the content of $TiO_2$ in $(1-x)SiO_2-(x)TiO_2$ system was increased the average diameter of composite fibers was proportionally increased. Also, the transformation of $TiO_2$ from anatase to rutile form was inhibited by the highly dispersed $TiO_2$ around $SiO_2$ particles up to $0.6SiO_2-0.4TiO_2$ composite fibers even after calcination at $1000^{\circ}C$. The photocatalytic activity of $SiO_2-TiO_2$ composite fibers was examined for the methylene blue (MB) decomposition which was confirmed using UV-vis/DRS spectra. The experiments demonstrated that the MB in aqueous solution was successfully photodegraded using $SiO_2-TiO_2$ composite nanofibers under UV-visible light irradiation.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.370-374
• /
• 2006

Ad-hoc 환경의 응용은 재난구조나 회의실 또는 강의실에서의 정보 교환과 같은 그룹 통에서 이용된다. Ad-hoc 환경은 무선 채널을 이용하므로 상대적인 낮은 대역폭과 높은 오류 발생률을 가지게 된다. 따라서 Ad-hoc 네트워크에서는 신뢰적인 전송이 요구된다. 이동 노드는 상대적으로 낮은 성능과 에너지의 제한으로 인해 유선 환경과 같은 신뢰적인 전송 기법을 Ad-hoc 환경에 적용하기에는 문제가 발생한다. Ad-hoc 환경의 무선 채널이 가지는 보안적인 취약성과 높은 에러율을 극복하는 신뢰적인 그룹 키 전송을 위한 재전송 기법을 제안한다. 신뢰적인 트리 형성하기 위해 n차 트리 구조를 이용한다. 손실 감지를 위한 ACK 메시지를 이용하고 손실 복구를 위한 재전송 기법에 대해 연구를 한다. 제안한 신뢰적인 그룹 키 전송을 위한 재전송 기법은 트리의 깊이의 차수가 루트 관리 노드, 서브 관리 노드와 로컬 멤버 노드로 구성되기 때문에 손실 감지와 손실 복구에 대한 연산의 오버헤드가 적다. 루트 관리 노드는 멤버 노드로부터 받은 개인키 정보를 이용하여 그룹 키를 생성하고 그룹 키 부분 정보를 서브 관리 노드에게 전송하고 서브 관리 노드에 대한 신뢰성을 책임진다. 서브 관리 노드는 루트 관리 노드로부터 받은 그룹 키 부분 정보를 로컬 멤버 노드에게 전송하고 로컬 멤버 노드에 대한 신뢰성을 책임진다. 루트 관리 노드와 서브 관리 노드를 관리 노드라 한다. 관리 노드가 신뢰적인 전송을 위해 관리하는 멤버 노드는 전체 그룹에 독립적으로 유지 가능하므로 확장성 및 효율성이 좋다. 관리 노드는 동적인 그룹에 따른 타이머를 설정함으로써 손실 감지에 대한 시간을 줄임으로써 효율적인 손실 감지 및 손실 복구를 한다. 임계값 설정으로 인한 중복 수신에 대한 오버헤드를 줄일 수 있다.신뢰성을 향상 시킬 수 있는 Load Balancing System을 제안한다.할 때 가장 효과적인 라우팅 프로토콜이라고 할 수 있다.iRNA 상의 의존관계를 분석할 수 있었다.수안보 등 지역에서 나타난다 이러한 이상대 주변에는 대개 온천이 발달되어 있었거나 새로 개발되어 있는 곳이다. 온천에 이용하고 있는 시추공의 자료는 배제하였으나 온천이응으로 직접적으로 영향을 받지 않은 시추공의 자료는 사용하였다 이러한 온천 주변 지역이라 하더라도 실제는 온천의 pumping 으로 인한 대류현상으로 주변 일대의 온도를 올려놓았기 때문에 비교적 높은 지열류량 값을 보인다. 한편 한반도 남동부 일대는 이번 추가된 자료에 의해 새로운 지열류량 분포 변화가 나타났다 강원 북부 오색온천지역 부근에서 높은 지열류량 분포를 보이며 또한 우리나라 대단층 중의 하나인 양산단층과 같은 방향으로 발달한 밀양단층, 모량단층, 동래단층 등 주변부로 NNE-SSW 방향의 지열류량 이상대가 발달한다. 이것으로 볼 때 지열류량은 지질구조와 무관하지 않음을 파악할 수 있다. 특히 이러한 단층대 주변은 지열수의 순환이 깊은 심도까지 가능하므로 이러한 대류현상으로 지표부근까지 높은 지온 전달이 되어 나타나는 것으로 판단된다.의 안정된 방사성표지효율을 보였다. $^{99m}Tc$-transferrin을 이용한 감염영상을 성공적으로 얻을 수 있었으며, $^{67}Ga$-citrate 영상과 비교하여 더 빠른 시간 안에 우수한 영상을 얻을 수 있었다. 그러므로 $^{99m}Tc$-transierrin이 감염 병소의 영상진단에 사용될 수 있을 것으로 기대된다.리를 정량화 하였다. 특히 선조체에서의 도파민 유리에 의한 수용체 결합능의 감소는 흡연에 의한 혈중 니코틴의 축

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.5
• /
• pp.129-136
• /
• 2012

Temperature of fresh concrete can be effectively used to predict the strength of concrete being cured and make an informed decision for stripping the molds. A hygrothermograph and thermo-couple sensors that require an extensive wiring have been applied to measure a temperature of concrete at the early stage of the curing process on site. However, these methods have limits to provide the temperature data in real time due to harsh working environment including frequent cutting of wires. Therefore, this study is aiming at developing a device based on wireless sensor network to measure the temperature of concrete being cured in formwork. The result showed that the wireless sensor with probe type thermistor which is developed had the same temperature data compared to the existed wire type thermistor, and we confirmed the temperature history of concrete in real time for 28 days throughout the gateway by wireless network that collects the temperature data measured from specimens in laboratory. Also, the network device for transmission can be easily separated from the probe sensor part and reused consistently. If the wireless sensor network device developed uses in the field, the temperature management of concrete will be systematically conducted from at the early stage of the curing, and especially be effective for cold weather concrete construction. In addition, it will contribute to the establishment of advanced quality control system for concrete and productivity of supervisors on site will be increased in the future.

• Journal of Broadcast Engineering
• /
• v.10 no.2
• /
• pp.210-220
• /
• 2005

This paper presents and analyzes laboratory test results of Equalization Digital On-Channel Repeater (EDOCR) using ATSC(Advanced Television Systems Committee) terrestrial digital TV broadcasting system. The EDOCR laboratory test, which is done at CRC(Communications Research Centre) Canada, is classified to receiver test, transmitter test, and synchronization test between transmission and reception frequencies. The receiver part includes feedback signal, random noise, single echo, multi-path ensemble, and NTSC/DTV interference test. The transmitter part includes out-of channel emission, quality of transmitting signal, and phase noise test. By the field test results, the receiver part of the EDOCR eliminates average 5.5 dB of feedback or single echo signal in range of 0 to 11 ${\mu}s$ and has average 18.6 dB at TOV(Threshold of Visibility) under random noise environment. Also, the transmitter part of the EDOCR satisfies the specification of US FCC(Federal Communications Commission), and frequency difference between transmitter and receiver is zero.