• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.544-545
• /
• 2012

In recent years, vehicle manufacturers have steadily developed fuel saving technologies such as multi-speed automatic transmission. With such a background, the Hyundai-powertech have developed the new 6-speed rear wheel drive(RWD)automatic transmission for FR vehicles. Despite having six-speed, it has the same number of planetary gears as a previously used five-speed automatic transmission and fewer brakes and one-way clutches than the 5 A/T, meaning that it is light, compact, and inexpensive. But, in addition to meshing this internal and external gear simultaneously and phase difference by the tooth contact point and the time difference occurs asymmetric and symmetric sideband noise and vibration caused by the modulation in the vehicle. In this paper presents a method for the design of the carrier phase difference by developing various theories and experiments for gear noise.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.4
• /
• pp.84-90
• /
• 2022

In this study, the acceleration performance improvement was analyzed for a 2-speed transmission applied EV. An EV simulator was developed to analyze the EV acceleration performance. The EV simulator includes a load transfer model between the front and rear. Thus, the EV simulator can analyze the acceleration performance difference between the front-and rear-wheel drive EVs. From the simulation results, it is deduced that the acceleration performance can be improved by 7.96% for the front-wheel drive EV and 16.10% for the rear-wheel drive EV. The 2-speed transmission can improve the acceleration performance without decreasing its maximum velocity. Moreover, the 2-speed transmission can improve the acceleration performance of the rear wheel drive more than that of the front-wheel drive EV.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.1
• /
• pp.42-47
• /
• 1999

This paper presents the information transmission between on-board and ground-site in MAGLEV. considering safety and high speed operation and density operation, information transmission between them is necessary. Therefore it is necessary for transmission system to ensure high speed transmission, low error rate, massive information, and reliability of information. To provide above conditions, 1.1km signal line assembly was constructed and Frequency Shift Keying(FSK) modulation and Open System Interconnection(OSI) based high-level data link control(HDLC) protocol are applied. To modulate digital signal for transmission from ground-site to on-board, carrier frequency of 70kHz is used and 90khz is used for transmission from on-board to ground-site. Transmission speed is 2400bps for consideration of train speed, quantity of information, and data error rate. And this paper introduces information monitoring considering user interface and presents the method for an effective data transmission in MAGLEV which is now being tested and intends to provide for an intelligent train operation system in future.

• Wind and Structures
• /
• v.31 no.6
• /
• pp.509-522
• /
• 2020

Wind load is the principal cause for a large number of the collapse of transmission lines around the world. The transmission line is traditionally designed for wind load according to a linear equivalent method, in which dynamic effects of wind are not appropriately included. Therefore, in the present study, incremental dynamic analysis is utilized to investigate the stability behavior of a 400 kV transmission line under wind load. In that case, the effects of vibration of cables and aerodynamic damping of cables were considered on the stability behavior of the transmission line. Superposition of the harmonic waves method was used to calculate the wind load. The corresponding wind speed to the beginning of the transmission line collapse was determined by incremental dynamic analysis. Also, the effect of the yawed wind was studied to determine the critical attack angle by the incremental dynamic method. The results show the collapse mechanisms of the transmission line and the maximum supportable wind speed, which is predicted 6m/s less than the design wind speed of the studied transmission line. Based on the numerical modeling results, a retrofitting method has been proposed to prevent failure of the tower members under design wind speed.

• Journal of Biosystems Engineering
• /
• v.27 no.6
• /
• pp.479-490
• /
• 2002

A dynamic model of a power shuttle transmission was developed and its validity was verified using the experimental data obtained from a transmission test bench. A 40㎾, 4WD tractor was also modeled using an application software EASY5 to investigate parameters and their effects on the power shifting performance. For a tractor model, the manual reverse gear was replaced by a power shuttle transmission. The tractor model also included an engine, main-gears for transmission, wheels, differentials and planet gears. Using the tractor model, the effects of the parameters such as modulating pressure and time, engine speed, tractor speed. tractor weight. reverse to forward speed ratio and torsional damper on the transient characteristics at starting and shuttle shifting were investigated by the computer simulation. The transient characteristics were represented by variations in clutch pressure, torque transmitted to input shaft and driving wheels, and power transmission capacity of the clutch. It was found that the modulating pressure and time affected most significantly the torque transmission and shifting time. The input torque, axle torque, power transmission capacity of the clutch and transmission time all increased with increase in engine speed, tractor speed. tractor weight and ratio of reverse to forward speeds. However, the axle torque decreased with tractor speed. Both the axle torque and power transmission capacity of the clutch also decreased with the ratio of reverse to forward speeds.

• Journal of Communications and Networks
• /
• v.12 no.3
• /
• pp.209-215
• /
• 2010

In an asymmetrical speed channel environment like asymmetric digital subscriber line, the up-link bandwidth is normally smaller than the down-link bandwidth, which will lead to extremely low utilization of down-link bandwidth when current P2P video transmission is applied. To overcome this, a new fast P2P video transmission method applied in an asymmetrical speed channel environment is proposed in this paper. On the basis of the many-to-one concept, the proposed method uses a new multipeer aggregation technique to enhance the utilization of down-link bandwidth. In addition, an adaptive peer assignment algorithm is also introduced in order to minimize the overall transmission time. Experimental results show that by using our proposed method, the utilization of down-link bandwidth is significantly improved, and the overall transmission time is greatly reduced.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.3
• /
• pp.49-58
• /
• 2019

Automatic transmissions are standard equipment in most automotive vehicles because they provide smooth speed shifting and a compact design with multiple speed ratios. Their structure consists mainly of planetary gear sets as power-transmitting devices and brakes and clutches as shifting devices. Several forward and one reverse speed ratios are achieved by actuating shifting devices to connect gears, input and output shafts, and the transmission case. In the development of a new transmission, kinematic configurations reflecting the transmission concept design are required, and the ability of the new concept design to be assembled without any interference among the connections must be demonstrated. In this study, an assemblability analysis of the kinematic configurations of a Ravigneaux-type automatic transmission was conducted with an assemblable example of an 8-speed Ravigneaux-type automatic transmission.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.133-138
• /
• 2001

The high-speed data service is on the increase and on the development because of using the coaxial cable which hold the most part of subscriber's loop, the transmission rate in a subscriber line has influenced by an external-electromagnetic factor such as the falling of a thunderbolt and the electromagnetic induction on transmission line. this external environment gets the noise of a communications line and then has an influence to the transmission speed and quality for the high-speed data service. this paper makes an analysis of noise characteristic appeared a subscriber communications line, measures a transmission speed per each cable-distance and resolves these relationship by putting the noise, which has affected extensively the transmission quality of ADSL service, into a subscriber line.

• Wind and Structures
• /
• v.28 no.6
• /
• pp.381-388
• /
• 2019

This paper described the application of Geospatial Analysis in determining mean wind speed, $V_h$ for wind load calculation imposed to electrical transmission tower structural design. The basic wind speed data on available station obtained from Malaysian Meteorology Department is adjusted by considering terrain and ground roughness factor. The correlation between basic wind speed, terrain factor and ground roughness stated in EN-50341-1 is used to obtain the $V_h$ for overhead transmission line elements 50 m above ground. Terrain factor, $k_r$ and ground roughness, $z_0$ in this study are presented by land use types of study area. Wind load is then calculated by using equation stated in design code EN-50341-1 by using the adjusted mean wind speed. Scatter plots of $V_h$ for different $k_r$and $z_0$ are presented in this paper to see the effect of these parameters to the value of $V_h$. Geospatial analysis is used to represent the model of $V_h$. This model can be used to determine possible area that will subject to wind load which severe to the stability of transmission tower and transmission line.

• International journal of advanced smart convergence
• /
• v.12 no.4
• /
• pp.26-34
• /
• 2023

A high-speed data transmission system is designed for the ground inspection equipment of satellite measurement and control. Based on USB2.0, the system consists of interface chip CY7C68013A, programmable logic processing unit EP4CE30F23C8, analog/digital and digital/analog conversion units. The working principle of data transmission is analyzed, and the system software logic and hardware composition scheme are detailed. The system was utilized to output/capture and store specific data packets. The results show that the high-speed data transmission speed can reach 38MB/s, and the system is effective for satellite test requirements.