• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.2
• /
• pp.232-237
• /
• 2011

Recently, continuous research on cryogenic valves is being carried out with the rapid development of the cryogenic valve-related industry, and especially, high performance of cryogenic valves is being promoted due to the breakthrough development and demand of users, etc., of the mechanical, shipbuilding, semiconductor and display industry and the aerospace industry field, but it is the reality that technical development and research on cryogenic application equipment on vacuum insulation are insufficient. The present research focused on interception of heat exchange with the outside by keeping low pressure after installing a jacket pipe outside a stem and also considered heat transfer properties on changes in pressure of a vacuum part and radius of a jacket which can reduce heat exchange for effective heat transmission control by studying it in a three-dimensional numerical analysis method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.151-155
• /
• 2002

In this paper, interference effects between NGSO and HAPS analyze into two cases. One is HAPS interference effect into NGSO, another is NGSO interference effect into HAPS. First, same case of number of users for LEO and HAPS interference received to LEO mobile station are over the -8.82dB. But in case of 1/10 and 1/100, I/N values are lowest 16.9dB and -20.3dB respectively. In case of interference received to HPAS mobile station, as LEO is 87$^{\circ}$, if the HAPS and LEO users is same, interference criterion over the 2200 users. but in the case of 1/10 and 1/100 of LEO is HAPS users, we don't know over the interference criterion. In accordance with, for reduce to effects of interference important suitable establishment of transmission power, number of users and cell radius of two system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1A
• /
• pp.34-40
• /
• 2009

In this paper, we derive the average received beampattern at each receive node which is randomly distributed within a disk when considering a collaborative beanforming between transmission nodes which are randomly distributed within another disk for ad hoc sensor network. Numerical results show that the radius of disk at the transmitter determines the beamwidth of mainbeam, and the sidebeam is affected by the number of transmitter nodes. We also consider K receive groups and divide the transmit sensor modes into K groups to support each receive group using beamforming, and derive the SINR at each receive node. Finally, we investigate the effects of beampattern and interference on total sum capacity among all receive node, and numerically determine the number of transmit nodes for each group which can achieve the maximal sum capacity.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.2
• /
• pp.184-191
• /
• 2017

This paper presents cluster based hybrid spectrum sensing system for M2M services. For each cluster, secondary nodes within the transmission radius of the primary node use hard decision method through local spectrum sensing to determine whether the primary node exists. And the other secondary nodes and the secondary nodes having poor radio channel conditions judge the existence of the primary node through the soft decision method of the values obtained by performing the cooperative spectrum sensing. In the proposed hybrid spectrum sensing system, the performance according to the number of secondary nodes is analyzed with the conventional system over Rayleigh fading channel. As the number of cooperative sensing users increased to 2, 3 and 4, the cluster error probability decreased to 0.5608, 0.5252 and 0.4001 at SNR of -10[dB] respectively. Since the proposed system uses less overhead traffic, it is found that it is more effective in terms of frequency usage than the conventional system using soft decision-soft decision and soft decision-hard decision methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3B
• /
• pp.224-236
• /
• 2003

MANET(Mobile Ad hoc networks) is a mobile, multi-hop, and wireless network which is bandwidth constrained, energy constrained, resource constrained, autonomous, and self operating systems with dynamic topology. These constraints make the routing between communicating nodes in ad hoc networks difficult. In this paper we survey several routing protocol for mobile ad hoc networks. Especially, we focus on Zone Routing Protocol, hybrid routing framework suitable for a wide of mobile ad hoc networks and analyze performance of ZRP. In the case of ZRP protocol, it is essential that the use of optimal zone radius for efficient use. Otherwise it was proved through an simulation that performance of whole network is rapidly decrease with greatly increasing overhead of ZRP traffic that need for transmission of packet by IARP or IERP traffic. Also we suggest the process of finding QoS path that use in-band signal for QoS routing in ad hoc network. This method guarantees route that make real time multimedia service for QoS enabled path.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.4
• /
• pp.196-200
• /
• 2016

We have developed new electrostatic discharge (ESD) protection devices with, bidirectional flip chip transient voltage suppression. The devices differ in their epitaxial (epi) layers, which were grown by reduced pressure chemical vapor deposition (RPCVD). Their ESD properties were characterized using current-voltage (I-V), capacitance-voltage (C-V) measurement, and ESD analysis, including IEC61000-4-2, surge, and transmission line pulse (TLP) methods. Two BD-FCTVS diodes consisting of either a thick (12 μm) or thin (6 μm), n-Si epi layer showed the same reverse voltage of 8 V, very small reverse current level, and symmetric I-V and C-V curves. The damage found near the corner of the metal pads indicates that the size and shape of the radius governs their failure modes. The BD-FCTVS device made with a thin n- epi layer showed better performance than that made with a thick one in terms of enhancement of the features of ESD robustness, reliability, and protection capability. Therefore, this works confirms that the optimization of device parameters in conjunction with the doping concentration and thickness of epi layers be used to achieve high performance ESD properties.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.3
• /
• pp.21-28
• /
• 2016

We propose an adaptive scheme of a differential codebook for temporally correlated channels. And the codeword entries of the propose codebook are selected among the set of M-PSK constellations - the values of M proposed in this paper are 8, 16, or 32. Firstly, we analyze mathematically how the optimal spherical cap radius of the proposed codebook is tracked. Then, we explain the practical implementation of the proposed adaptive method. Practically, some candidate differential codebooks we propose in this paper can be switched according to the temporal correlation coefficients of wireless channels in the proposed scheme. Monte-Carlo simulations demonstrate that the achievable throughput performance employing the proposed codebook is always superior to those of the differential codebooks employing M-PSK constellations and non-adaptive differential codebooks with the same amount of feedback information.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.2
• /
• pp.61-66
• /
• 2021

This paper related with the performance comparison of mSE-MMA and mDSE-MMA adaptive equalization algorithm which is possible to reduce the intersymbol interference that occurs in the nonlinear communication channel transmitting 16-QAM signal. This two algorithm is possible to reduce the computational load compared to the current MMA algorithm, it has the degraded equalization performance due to simplified arithmetic in order to applying the mobile communication terminal. In order to improve the performance degradation, they controls the step size according to the existence of arbitrary radius circle of equalizer output compared to transmitted symbol point. The variation of step size according to this principle is applied to the SE-MMA and DSE-MMA, namely mSE-MMA and mDSE-MMA algorithm, the algorithm's performance were compared in the same channel and noise environment by computer simulation. As a result of simulation, the mSE-MMA has more superior to the mDSE-MMA in residual value of every performance index and SER performance, and the vice versa result in convergence speed.

• Journal of Biosystems Engineering
• /
• v.43 no.4
• /
• pp.311-319
• /
• 2018

Purpose: The aim of this study is to develop a small combine for harvesting miscellaneous cereal crops. Methods: A prototype small combine was designed and constructed. Its specifications and basic performance were investigated. Results: The prototype small combine for harvesting miscellaneous cereal crops was designed and constructed to reflect similar specifications as those of the conventional combine. The prototype small combine comprises a diesel engine with the rated power/speed of 22.0 kW/2,600 rpm, three-stage primary and two-stage speed range transmission shifts, and a double acting threshing part. The maximum travel speeds of the prototype combine are approximately 0.72 m/s, 2.50 m/s, 0.30 m/s at the low, high speed range shifts in the forward direction, and while traversing in the reverse direction, respectively. The minimum radius of turning was approximately 1.50 m. In a static lateral overturning test, the prototype combine overturned neither to the right nor to left on a $30^{\circ}$ slope. The results of an oilseed rape harvesting test included the maximum operating speed of 0.32 m/s, the grain loss ratio of approximately 9.0%, and the effective field capacity of approximately 10.3 a/h. Additionally, among the outputs in grain outlet, the whole grains, damage grains, and materials other than grain (MOG) ratios accounted for 97.4%, 0.0%, and 2.6%, respectively. Conclusions: The prototype small combine for harvesting miscellaneous cereal crops indicates good driving ability and stability. The results of the oilseed rape harvesting test reveal that the harvesting performance must be enhanced such that the separating and cleaning parts are more suitable for each type of crop, thus reducing grain loss and foreign substances among the outputs in grain outlet. An improved small prototype combine could be used effectively to mechanize the harvesting of miscellaneous cereal crops in small family farms or semi-mountainous areas.

• Journal of Powder Materials
• /
• v.29 no.5
• /
• pp.399-410
• /
• 2022

Changes in the mechanical properties and microstructure of an IN 939 W alloy according to the sintering heating rate were evaluated. IN 939 W alloy samples were fabricated by spark plasma sintering. The phase fraction, number density, and mean radius of the IN 939 W alloy were calculated using a thermodynamic calculation. A universal testing machine and micro-Vickers hardness tester were employed to confirm the mechanical properties of the IN 939 W alloy. X-ray diffraction, optical microscopy, field-emission scanning electron microscopy, Cs-corrected-field emission transmission electron microscopy, and energy dispersive X-ray spectrometry were used to evaluate the microstructure of the alloy. The rapid sintering heating rate resulted in a slightly dispersed γ' phase and chromium oxide. It also suppressed the precipitation of the η phase. These helped to reinforce the mechanical properties.