• 한국자동차공학회논문집
• /
• 제4권1호
• /
• pp.63-74
• /
• 1996

Automatic transmission for heavy duty vehicles is a part of the power pack which includes steering and braking systems. This transmission in different from the one for passenger car. Therefore, in order to understand the trend of the important design parameters, maneuverability, acceleration performance and maximum speed, we need to analyze the total performance characteristics of the power transmission systems. In this study, modeling of the automatic transmission in heavy duty vehicle is carried out and the performance analysis method is presented. Results can be used for performance estimation data in the analysis for several combination method which determines the optimal parameters on the basis of penalty functions and weightings. And the estimation method of the important performance parameters such as engine inertia or power loss of engine by experiments is presented.

• Journal of Biosystems Engineering
• /
• 제43권1호
• /
• pp.1-13
• /
• 2018

Purpose: The development of compact tractors that can be used in dry fields, greenhouses, and orchards for pest control, weeding, transportation, and harvesting is necessary. The development and performance evaluation of power transmission units are very important when it comes to tractor development. This study evaluates the performance of a driving power transmission unit of a 50 kW multi-purpose narrow tractor. Methods: The performance of the transmission and forward-reverse clutch, which are the main components of the driving power transmission unit of multi-purpose narrow tractors, was evaluated herein. The transmission performance was evaluated in terms of power transmission efficiency, noise, and axle load, while the forward-reverse clutch performance was evaluated in terms of durability. The transmission's power transmission efficiency accounts for the measurement of transmission losses, which occur in the transmission's gear, bearing, and oil seal. The motor's power was input in the transmission's input shaft. The rotational speed and torque were measured in the final output shaft. The noise was measured at each speed level after installing a microphone on the left, right, and upper sides. The axle load test was performed through a continuous equilibrium load test, in which a constant load was continuously applied. The forward-reverse clutch performance was calculated using the engine torque to axle torque ratio with the assembled engine and transmission. Results: The loss of power in the transmission efficiency test of the driving power unit was 6.0-9.7 kW based on all gear steps. This loss of horsepower was equal to 11-18% of the input power (52 kW). The transmission efficiency of the driving power unit was 81.5-89.0%. The noise of the driving power unit was 50-57 dB at 800 rpm, 70-77 dB at 1600 rpm, and 76-83 dB at 2400 rpm. The axle load test verified that the input torque and axle revolutions were constant. The results of the forward-reverse clutch performance test revealed that hydraulic pressure and torque changes were stably maintained when moving forward or backward, and its operation met the hydraulic design standards. Conclusions: When comprehensively examined, these research results were similar to the main driving power transmission systems from USA and Japan in terms of performance. Based on these results, tractor prototypes are expected to be created and supplied to farmhouses after going through sufficient in-situ adaptability tests.

• 한국전자통신학회논문지
• /
• 제14권6호
• /
• pp.1083-1088
• /
• 2019

전송성능은 수중 MANET의 연구, 개발 뿐 아니라 설계, 구축 및 운용에 있어서 매우 중요한 요소임에도 불구하고 네트워크 성능의 정도를 비교, 분석하는 척도로 한정적으로 사용되는 경향이 있다. 본 논문에서는 수중 MANET에서 전송성능의 이용을 확대하기 위하여 전송성능을 활용한 이동패턴을 분석해 본다. 이를 위하여 전송성능과 이동패턴의 관계를 고찰하고 이들 토대로 특정 이동패턴이 전송성능에 미치는 영향을 분석한다. 본 연구의 결과는 수중 환경에서 이동체의 전송성능을 관찰하여 이동체의 이동패턴을 예측 및 분석하는 주요 근거로 활용될 수 있을 것으로 본다.

• 한국기계가공학회지
• /
• 제21권4호
• /
• pp.84-90
• /
• 2022

In this study, the acceleration performance improvement was analyzed for a 2-speed transmission applied EV. An EV simulator was developed to analyze the EV acceleration performance. The EV simulator includes a load transfer model between the front and rear. Thus, the EV simulator can analyze the acceleration performance difference between the front-and rear-wheel drive EVs. From the simulation results, it is deduced that the acceleration performance can be improved by 7.96% for the front-wheel drive EV and 16.10% for the rear-wheel drive EV. The 2-speed transmission can improve the acceleration performance without decreasing its maximum velocity. Moreover, the 2-speed transmission can improve the acceleration performance of the rear wheel drive more than that of the front-wheel drive EV.

• 한국전자통신학회논문지
• /
• 제14권1호
• /
• pp.49-54
• /
• 2019

음향채널을 주로 사용하는 수중통신환경은 지상통신환경과 달라 통신 서비스를 구축함에 있어 수중환경에 적합하게 전송성능을 분석하는 것이 필요하며, 통신망의 일반적 성능 뿐 아니라 통신 서비스별 전송 대상 트래픽의 전송성능을 분석하여 통신서비스에 적절한 트래픽처리 방안의 강구가 요구된다. 본 연구에서는 수중 MANET(Mobile Ad-hoc Network)에서 비디오 트래픽의 전송 성능을 분석하고 이 결과를 토대로 비디오 트래픽 전송 방안을 제시한다. 본 연구는 NS(Network Simulator)-3에 기반한 컴퓨터 시뮬레이션을 이용하여 수행하며, 전송 성능으로는 처리율, 전송지연, 패킷손실율을 사용한다.

• 한국전자통신학회논문지
• /
• 제11권12호
• /
• pp.1187-1192
• /
• 2016

수중 MANET의 설계, 구축 및 운용에서 전송성능의 측정 및 분석은 네트워크 차원의 전송 파라미터를 중심으로 수행됨에 따라 성능 분석 결과가 네트워크 수준의 성능에 국한되고 있어 사용자 수준의 전송품질과 관련한 전송성능을 분석 고찰하기에는 미흡한 점이 있다. 본 논문에서는 수중 MANET에서 네트워크 수준의 전송성능 분석의 단점을 보완하고자 사용자 수준에서 요구되는 응용트래픽 관점에서 전송성능을 분석한다. 수중 MANET에서 활용도가 증가할 것으로 예상되는 음성트래픽을 대상으로 전송성능을 분석하고, MOS, CCR 및 EED 등의 음성 전송품질 요구조건에 적합한 수중 MANET 조건을 제시한다. 본 연구는 NS-2를 기반으로 구축된 컴퓨터 시뮬레이션을 사용하여 수행하며, 음성 트래픽으로는 VoIP 규격을 사용한다.

• KIEE International Transactions on Power Engineering
• /
• 제2A권4호
• /
• pp.160-165
• /
• 2002

This paper describes a proposed performance criteria and evaluation procedures for transmission system planning in Korea. Performance criteria of the transmission system are expected to be used as a guideline for investment into a transmission network. Moreover, performance evaluation procedures, which are based on current practices and widely accepted theories, are suggested to achieve fair and acceptable results.

• 한국정밀공학회지
• /
• 제31권4호
• /
• pp.343-351
• /
• 2014

Washing machines designed to clean laundry have been more widely used at home as they reduce household labor and boost the quality of life. Technological advances and better standards of life increase demand for laundry washing performance. Energy efficiency regulations and consumer demand for the larger trend, washing machine makers should be done in performance studies to reduce power, and water consumption and the load on power transmission devices. In this study, performance of a fully automatic washing machine with unconstrained transmission is analyzed through experiment and CFD simulation. It is found that the interaction between laundry and transmission change the washing behavior and affect washing performance with regard to the degree of freedom. The results obtained in this study can be used in developing new washing machine transmissions and make them more robust.

• 전자공학회논문지S
• /
• 제35S권3호
• /
• pp.9-18
• /
• 1998

For constructionof the next generation satellite B-ISDN/ATM networks considering integration with terrestrial information infrastructure networks, various high speed and wideband satellites with be launched and they will make used of frequency reue techniques for efficient management of limited frequency resource. Therefore, CCI(Co-Channel Interference) inherent in frequency reuse will be a dominant factor in performance degradation of satellite networks. This paper alanyzes the ATM cell transmission performance degradation caused by CCI. The satellite link, including up-link and down-link thermal noise, CCI, and nonlinear satellite transponder, is modeled and interleaving technique is used for compensating the ATM cell transmission performance degradation caused by burst error of satellite link. First, each satellite link subsystem is analyzed in detail and then end-to-end ATM cell transmission performance is evaluated with BER and CLR. Specifically, ATMcell transmission performance degradation caused by CCI is evaluated in detail.

• 조명전기설비학회논문지
• /
• 제26권2호
• /
• pp.78-85
• /
• 2012

Low-Voltage power lines should equip surge protection devices which protect electronic equipments and human lives against lightning and abnormal voltages. Data transmission capacity of the power line is determined by frequency characteristics of the surge protective devices. To analyze the effects of surge protective devices on the data transmission performance, various combinations of installation methods are tested which include ZnO varistor elements that is compatible with class I, class II and class III. The result claims that ZnO varistor for class III is found to be one of the main factors that deteriorates the transmission performance. To overcome this problem a serial connection methed between Gap type SPD and ZnO varistor is proposed. With the proposed scheme, laboratory experimental results show that the data transmission performance can be improved up to 91.9[%] with proper SPD combination.