• 한국간호교육학회지
• /
• 제7권2호
• /
• pp.196-206
• /
• 2001

The purpose of this study was to identify Korean adolescents' sexual harassment conditions and patterns in schools as well as their psychological reactions when they are under sexual harassments or they committed sexual harassments. The subjects were 475 middle and high schoolers in Pusan and Gyeong Sang Nam-Do. The survey was executed from July 1 through Dec. 31, 2000. The collected data was analyzed by SPSS WIN 8.0 using percentage, mean. The results of this study were as follows: 1. the linguistic sexual harassment such as 'lewd jokes or dirty talks' was the major pattern(35.4%), The body touching such as 'kiss or embracing', 'internet transmission of pornography', 'sexual harassing of body characteristics', touching breast', 'grasping of hands or body touching', 'body touching in secret place', 'urging to sit in touch or on knees', 'exposing of special body areas', and 'showing pornography' followed in a row. 2. The eighteen point three percents of subjects had the experience to commit sexual harassment. The forty four point seven percent of above subjects committed it against their classmates. The first time to commit sexual harassment was their middle school period (38.4%). Their motives to commit it were as under: 'killing time'(48.8%), 'annoying', 'attracting attention from the other sex', 'expressing lovely emotions', 'urging of their friends', 'misunderstanding that the other partners felt good when they experienced sexual harassment, 'showing their strength' etc. their with committing harassments they felt as under ; 'joyful'(61.6%), 'funny,' 'desirous to try again', 'thrilling', 'breaking stress', very pleasant', 'exciting', 'regretful', 'guilty', and 'feeling fear' etc. 3. Twenty four point two percents of the population exposed to sexual harassments. The sexual harassers were almost their classmates (42.7%). And then unknown people', 'boy or girl friends and school staffs' followed in a row. The places where harassments happened were 'inside classroom'(69.8%), 'school bus and subway', 'outside school', etc. The feelings when experienced harassments were 'anger' (51.3%), 'hurting self-respect', 'embarrassing', 'rejection', 'insulting', 'shame', 'fear', 'dislike', 'anxiety', 'melancholy' etc. The reasons not to have consultations after sexual harassments were 'worrying to be well-known'(49.6%), 'believing not helpful enough', 'regarding simple mischief', 'trying to revenge directly', 'understanding their mistakes', 'worrying retaliation' etc.

• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2002년도 정기총회 및 추계학술연구발표회
• /
• pp.5-6
• /
• 2002

The new spectrometer for X-ray Induced Electron Emission Spectroscopy (XIEES) .has been recently developed in KRISS in collaboration with PTI (Russia). The spectrometer allows to perform research using the XAFS, SXAFS, XANES techniques (D.C.Koningsberger and R.Prins, 1988) as well as the number of techniques from XIEES field(L.A.Bakaleinikov et all, 1992). The experiments may be carried out with registration of transmitted through the sample x-rays (to investigate bulk samples) or/and total electron yield (TEY) from the sample surface that gives the high (down to several atomic mono-layers in soft x-ray region) near surface sensitivity. The combination of these methods together give the possibility to obtain a quantitative information on elemental composition, chemical state, atomic structure for powder samples and solids, including non-crystalline materials (the long range order is not required). The optical design of spectrometer is made according to Johannesson true focusing schematics and presented on the Fig.1. Five stepping motors are used to maintain the focusing condition during the photon energy scan (crystal angle, crystal position along rail, sample goniometer rail angle, sample goniometer position along rail and sample goniometer angle relatively of rail). All movements can be done independently and simultaneously that speeds up the setting of photon energy and allows the using of crystals with different Rowland radil. At present six curved crystals with different d-values and one flat synthetic multilayer are installed on revolver-type monochromator. This arrangement allows the wide range of x-rays from 100 eV up to 25 keV to be obtained. Another 4 stepping motors set exit slit width, sample angle, channeltron position and x-ray detector position. The differential pumping allows to unite vacuum chambers of spectrometer and x-ray generator avoiding the absorption of soft x-rays on Be foil of a window and in atmosphere. Another feature of vacuum system is separation of walls of vacuum chamber (which are deformed by the atmospheric pressure) from optical elements of spectrometer. This warrantees that the optical elements are precisely positioned. The detecting system of the spectrometer consists of two proportional counters, one scintillating detector and one channeltron detector. First proportional counter can be used as I/sub 0/-detector in transmission mode or by measuring the fluorescence from exit slit edge. The last installation can be used to measure the reference data (that is necessary in XANES measurements), in this case the reference sample is installed on slit knife edge. The second proportional counter measures the intensity of x-rays transmitted through the sample. The scintillating detector is used in the same way but on the air for the hard x-rays and for alignment purposes. Total electron yield from the sample is measured by channeltron. The spectrometer is fully controlled by special software that gives the high flexibility and reliability in carrying out of the experiments. Fig.2 and fig.3 present the typical XAFS spectra measured with spectrometer.

• The Korean Journal of Physiology and Pharmacology
• /
• 제1권6호
• /
• pp.681-690
• /
• 1997

Loss of synaptic transmission and accumulation of extracellular $K^+([K^+]_O)$ are the key features in ischemic brain damage. Here, we examined the effects of several $K^+$channel modulators on the early ischemic changes in population spike (PS) and $[K^+]_o$ in the CA1 pyramidal layer of the rat hippocampal slice using electrophysiological techniques. After onset of anoxic aglycemia (AA), orthodromic field potentials decreased and disappeared in $3.3{\pm}0.22\;min$ $(mean{\pm}SEM,\;n=40)$. The hypoxic injury potential (HIP), a transient recovery of PS appeared at $6.0{\pm}0.25\;min$ (n=40) in most slices during AA and lasted for $3.3{\pm}0.43\;min$. $[K^+]_o$ increased initially at a rate of 0.43 mM/min (Phase 1) and later at a much faster rate (12.45 mM/min, Phase 2). The beginning of Phase 2 was invariably coincided with the disappearance of HIP. Among $K^+$ channel modulators tested such as 4-aminopyridine (0.03, 0.3 mM), tetraethylammonium (0.1 mM), NS1619 $(0.3{\sim}10\;{\mu}M)$, niflumic acid (0.1 mM), glibenclamide $(40\;{\mu}M)$, tolbutamide $(300\;{\mu}M)$ and pinacidil $(100\;{\mu}M)$, only 4-aminopyridine (0.3 mM) induced slight increase of $[K^+]_o$ during Phase 1. However, none of the above agents modulated the pattern of Phase 2 in $[K^+]_o$ in response to AA. Taken together, the experimental data suggest that 4-aminopyridine-sensitive $K^+$channels, large conductance $Ca^{2+}-activated$ $K^+$ channels and ATP-sensitive $K^+$ channels may not be the major contributors to the sudden increase of $[K^+]_o$ during the early stage of brain ischemia, suggesting the presence of other routes of $K^+$ efflux during brain ischemia.

• 한국자동차공학회논문집
• /
• 제24권5호
• /
• pp.538-548
• /
• 2016

The purpose of this study is to identify the possibility of effective tuning works, understand the characteristics of tuning engine, and analyse the basic data of engine tuning inspection corresponding to the safe operation and environment of a driving gasoline car. The effects of tuning on the characteristics of performance and exhaust emissions under a wide range of engine speeds are experimentally investigated by the actual driving car with a four-cycle, four-cylinder DOHC, turbo-intercooler, water-cooled gasoline engine operating at four types of non-tuning, tuning 1, 2 and 3. The tuning parts in the gasoline engine are the intake manifold, intake pipe and air filter. In the experiment, the output, torque and air-fuel ratio of the five-speed automatic transmission vehicles were measured at the chassis dynamometer(Dynojet 224xLC) with one person on board. The exhaust emissions of $NO_X$, THC, CO, $O_2$ and $CO_2$, and excess air ratio(${\lambda}$) at the other chassis dynamometer(DASAN-MD-ASM-97-KR-HD) were also measured by the idle/constant-speed mode(ASM2525 mode) test method. It is found that the actual air-fuel ratios of non-tuning and tuning engines were shown to be lower than the stoichiometric air-fuel ratio with increasing engine speed, and the actual air-fuel ratio of non-tuning engine was slightly higher than those of tuning engines when the engine speed is more than 4000 rpm. The output was significantly increased by the tuning whereby the maximum output of tuning engine was more increased to approximately 117.64% than that of non-tuning engine. In addition, CO, THC and $NO_X$ emissions of non-tuning and tuning engines measured by the constant-speed test mode were all satisfied with the inspection standards. CO emission was increased, while THC and $NO_X$ emissions were reduced by tuning.

• 한국항해항만학회지
• /
• 제36권6호
• /
• pp.475-480
• /
• 2012

eLoran (enhanced Long Range Navigation)의 구축을 위해서는 로란시스템 설비업그레이드, 시스템 정보데이터 채널추가, dLoran (differential Loran) 사이트, ASF(Additional Secondary Factor) 데이터베이스 등이 필요하다. 특히 eLoran 송신국들의 정확한 UTC (세계협 정시, Coordinated Universal Time) 동기는 eLoran 시스템의 항법성능 향상을 위해 필수적이다. 따라서 송신국들의 정확한 UTC 동기를 위해서는 송신국의 절대 지연시간 측정 및 모니터링이 필요하며, 측정된 송신국 지연시간의 변화량을 보정정보로 이용자에게 제공하여야 한다. 본 연구에서는 포항 LORAN-C 송신국(9930M)을 대상으로 수신지점에서의 TOA(Time of Arrival) 산출을 위한 송신신호의 기준시점을 측정하는 방법을 제시하였고 지연측정 시스템 및 송출신호 위상 모니터링 시스템을 개발하여 포항 송신국의 기준시점을 평가하였다. 측정결과 포항 송신국의 기준점 오프셋은 $-2.23{\mu}s$로 측정되었으며 송신 로란펄스의 위상을 관측한 결과 1 개월간에 약 $0.3{\mu}s$ 정도 흐르는 것이 관측되어 로란의 PNT(Positioning, Navigation and Timing) 활용을 위해 위상 모니터링과 보상이 필수적임을 알 수 있었다.

• International Journal of Oral Biology
• /
• 제39권1호
• /
• pp.49-56
• /
• 2014

이상의 실험결과들을 요약하면, CFA를 안면영역 피하로 주입하여 발생한 염증성 통증 행위반응은 P2X 수용체의 억제제의 투여로 감소할 수 있었다. 특히 $P2X_7$ 수용체 억제제를 투여하면 진통작용 뿐 아니라 활성화된 신경아교세포 발현을 억제하였다. 이러한 실험 결과는 $P2X_7$ 수용체가 신경아교세포에 영향을 미쳐 안면에서 발생하는 만성 염증성 통증의 발생과 유지에 관여하고 있다는 것을 보여준다. 따라서 중추신경계의 신경아교세포를 조절할 수 있는 중추성 $P2X_7$ 수용체 작용기전은 임상에서 만성 염증성 통증을 보다 효과적으로 치료할 수 있는 새로운 방법을 제시해 줄 수 있다고 생각된다.

• 한국태양에너지학회 논문집
• /
• 제28권3호
• /
• pp.35-44
• /
• 2008

In this study, the experiment of the measuring of four different types of flooring materials' thermal characteristics was conducted and examined during the summer. The experimental materials were arranged on the existing slab of the roof, and then its thermal characteristics were examined from the point of view of thermal radiation analysis. The aim of this study is ultimately to draw the fundamental data for improvements in a building's thermal function and reduce the urban heat island phenomena through optimizing the thermal characteristics of the surface covering materials of a building. The results from this study are as follows; 1) Each experimental material's albedo was calculated as 0.83 on the aluminum panel, 0.40 on the rock block, 0.37 on the wood deck and 0.21 on the concrete. It shows that the concrete material, which has the lowest short wave reflective rate, absorbed the most radiation energy and the aluminium panel has absorbed the lowest radiation energy. 2) From the each experimental object's value of the long wave radiation, the concrete material measured the highest, at $628W/m^2$, and the aluminium panel measured the lowest at $412W/m^2$. Therefore, it verifies that the experimental objects' own radiation rate determines the amount of the long wave radiation. 3) The degree of energy absorbency of a building's surface covering materials is greatly influenced by its own albedo and radiation rate, Therefore, it needs to be considered for the improvements in a building's thermal function and reducing the urban heat island phenomena. 4) According to the evaluation result of the each experimental object's overall heat transmission screening function on the roof of a building, the wooden deck is proven to be an excellent material for excluding the outside temperature differences effectively with its characteristic of low heat capacity and conduction. Also its surface temperature on the roof slab and the temperature difference during the day were both measured at low.

• 한국환경보건학회지
• /
• 제45권1호
• /
• pp.82-96
• /
• 2019

Objective: The aims of this study were to provide the basic data for establishing a precautionary management policy and to develop a methodology for selecting a radon management priority target area suitable for the Korean domestic environment. Methods: A suitable mapping method for the domestic environment was derived by conducting a quantitative comparison of predicted values and measured values that were calculated through implementation of two models such as IDW and RBF methods. And a qualitative comparison including the clarity of information transmission of the written radon map was carried out. Results: The predicted and measured values were obtained through the implementation of the spatial analysis models. The IDW method showed the lowest in the calculated mean square error and had a higher correlation coefficient than the other methods. As results of comparing the uncertainty using the jackknife concept and the concept of error distance for comparison of the differences according to the model interpolation method, the sum of the error distances showed a modest increase compared with the RBF method. As a result of qualitatively comparing the information transfer clarity between the radon maps prepared with the predicted values through the model implementation, it was found that the maps plotted using the predicted values by the implementation of the IDW method had greater clarity in terms of highness and lowness of radon concentration per area compared with the maps plotted by other methods. Conclusions: The radon management priority area suggests selecting a metropolitan city including an area with a high radon concentration.

• 한국응용과학기술학회지
• /
• 제38권1호
• /
• pp.48-59
• /
• 2021

본 연구는 코로나19 유행 시기 간호대학생의 코로나19에 대한 불안, 위험인식, 정보이해력, 감염예방행위 이행 수준을 파악하기 위해 시도되었다. 본 연구는 서술적 조사연구로 2020년 6월 8일부터 6월 14일까지 간호대학생 224명을 대상으로 온라인을 통해 설문조사를 실시하였다. 수집된 자료는 SPSS 26.0을 이용하여 기술통계, t-test, ANOVA, 상관관계 분석을 하였다. 간호대학생의 불안정도는 6.86점(최대10점)으로 보통 수준이었으며, 위험인식은 8.19점(최대10점), 정보이해력은 3.50점(최대4점), 감염예방행위 수행정도는 4.44점(최대5점)으로 높은 수준이었다. 감염예방행위는 불안정도, 위험인식, 정보이해력이 높을수록 수행정도가 높았다. 코로나19와 같은 신종감염병이 유행할 때는 감염에 대한 불안감과 위험인식이 증가할 수 있으므로 감염병에 대한 충분한 정보제공으로 감염병에 대한 정확한 이해가 필요하다. 신종감염병에 대한 정확한 이해는 철저한 감염예방행위를 향상 시키므로 감염병 전파 위험을 감소시킬 수 있을 것이다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제7권4호
• /
• pp.228-235
• /
• 2007

The main purpose of this paper is to manage the container property effectively at the container yard by applying the RTLS technology to the field of port logistics. Yet, many kinds of noises happen to be inputted with the distance value(between the reader and the tag) which is to be inputted into the location identification algorithm, which makes the distance value jumped due to the system noise of the ultrasonic sensor module and the measurement noise. The Kalman Filter is widely used to prevent this jump occurrence; the noises are eliminated by using the EKF(Extended Kalman Filter) while considering that the distance information of the ultrasonic sensor is non-linear. Also, the 3D RTLS system at the port container yard suggested in this research is designed not to be interrupted for its ultrasonic transmission by positioning the antenna at the front of each sector of the container where the active tags are installed. We positioned the readers, which function as antennas for location identification, to four places randomly in the absolute coordinate and let the positions of the active tags identified by using the distance data delivered from the active tags. For the location identification algorithm used in this paper, the triangulation measurement that is most used in general is applied and newly reorganized to calculate the position of the container. In the first experiment, we dealt with the error resulting in the angle and the distance of the ultrasonic sensor module, which is the most important in the hardware performance; in the second, we evaluated the performance of the location identification algorithm, which is the most important in the software performance, and tested the noise cancellation effects for the EKF. According to the experiment result, the ultrasonic sensor showed an average of 3 to 5cm error up to $45^{\circ}$ in case of $60^{\circ}$ or more, non-reliable linear distances were obtained. In addition, the evaluation of the algorithm performance showed an average of $4^{\circ}{\sim}5^{\circ}$ error due to the error of the linear distance-this error is negligible for most container location identifications. Lastly, the experiment results of noise cancellation and jump preservation by using the EKF showed that noises were removed in the distance information which was entered from the input of the ultrasonic sensor and as a result, only signal was extracted; thus, jumps were able to be removed and the exact distance information between the ultrasonic sensors could be obtained.