• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.6
• /
• pp.9-18
• /
• 2000

This study includes noise automatic inspection system for washing machine auto-transmission one of modern home necessary. We effort to find and certificate sound noise source by sound power and sound intensity, and apply to frequency analysis in vibration related sound noise. still more we have been studying to data acquisition and programming for MS VisualBasic version 5.0. System component is below. 1) Pentium PC or data acquisition. 2) DSO for noise acquisition. 3)S/W for comparison and decision. 4) I/F Board for data communication. Wave form data through the DSO are converting to ASCII code data. The ASCII code through binary converting S/W. Finally we will making noise monitoring system and automatic inspection system.

• Journal of information and communication convergence engineering
• /
• v.8 no.3
• /
• pp.273-276
• /
• 2010

Opportunistic spectrum access (OSA) allows unlicensed users to share licensed spectrum in space and time with no or little interference to primary users, with bring new research challenges in MAC design. We propose a cognitive MAC protocol using statistical channel information and selecting appropriate idle channel for transmission. The protocol based on the CSMA/CA, exploits statistics of spectrum usage for decision making on channel access. Idle channel availability, spectrum hole sufficiency and available channel condition will be included in algorithm statistical information. The model include the control channel and data channel, the transmitter negotiates with receiver on transmission parameters through control channel, statistical decision results (successful rate of transmission) from exchanged transmission parameters of control channel should pass the threshold and decide the data transmission with spectrum hole on data channel. The proposed protocol's simulation will show that proposed protocol does improve the throughput performance via traditional opportunistic spectrum access MAC protocol.

• Journal of Industrial Technology
• /
• v.27 no.B
• /
• pp.235-243
• /
• 2007

Sensor network is used to obtain sensing data in various area. The interval to sense the events depends on the type of target application and the amounts of data generated by sensor nodes are not constant. Many applications exploit long sensing interval to enhance the life time of network but there are specific applications that requires very short interval to obtain fine-grained, high-precision sensing data. If the number of nodes in the network is increased and the interval to sense data is shortened, the amounts of generated data are greatly increased and this leads to increased amount of packets to transfer to the network. To transfer large amount of packets fast, it is necessary that the delay between successive packet transmissions should be minimized as possible. In Sensor network, since the Operating Systems are worked on the event driven, the Timer Event is used to transfer packets successively. However, since the transferring time of packet completely is varies very much, it is very hard to set appropriate interval. The longer the interval, the higher the delay and the shorter the delay, the larger the fail of transfer request. In this paper, we propose ESTEO which reduces the delay between successive packet transmissions by using SendDone Event which informs that a packet transmission has been completed.In ESTEO, the delay between successive packet transmissions is shortened very much since the transmission of next packet starts at the time when the transmission of previous packet has completed, irrespective of the transmission timee. Therefore ESTEO could provide high packet transmission rate given large amount of packets.

• KEPCO Journal on Electric Power and Energy
• /
• v.7 no.1
• /
• pp.79-84
• /
• 2021

The fundamental element to be kept for big data analysis, artificial intelligence technologies and asset management system is a data quality, which could directly affect the entire system reliability. For this reason, the momentum of data cleaning works is recently increased and data cleaning methods have been investigating around the world. In the field of electric power, however, asset data cleaning methods have not been fully determined therefore, automatic cleaning algorithm of asset data for transmission cables has been studied in this paper. Cleaning algorithm is composed of missing data treatment and outlier data one. Rule-based and expert opinion based cleaning methods are converged and utilized for these dirty data.

• Fire Science and Engineering
• /
• v.23 no.6
• /
• pp.75-81
• /
• 2009

In this paper, USN of wireless communication with easy to install and effectiveness with variety information gathering has been proposed as a alternative of wired-based line for transmission of fire sensing data. But, The sensor node using USN should be considered for wireless transmission range and reliability of information. In this study, the zigbee protocol sensor node was implemented and then tested transmission range of sensor node as 10m interval using voltage information of DC 3V & 5V. Here, maximum transmission distance was confirmed 90m inside-outside. When used mesh routing relay node, distance was not limited. In USN network building, when fire sensing data transmitted, the sensing data same between direct sensing data from sensor and collecting data at USN. Therefore, was confirmed reliability for transmission range and information of proposed zigbee sensor node.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.362-364
• /
• 1998

The transmission of information by inductive loop is required for train-safety and fast running. FSK modulation has been used for transmission of information in fast running. Transmission channel between train and ground must be protected from interference of power line. To protect transmission data from noises, the analysis on the transmission line must be performed in advance. In this paper, transmission line is analyzed in view of reflection and time delay in both noise and signal.

• The KIPS Transactions:PartB
• /
• v.9B no.1
• /
• pp.77-82
• /
• 2002

Progressive image transmission involves a progressive increase in the image resolution at the receiver from a lower to a higher resolution during the transmission of data. This is an effective way of using a limited transmission channel, because, after estimating the value of the data in the early transmission period, a decision can be made whether or not to proceed with the transmission of the remaining part. To realize more effective progressive image transmission, the current thesis divides an image into bit planes and then re-organizes each plane into a complementary quadtree structure. As a result, by transmitting the data on each bit plane and each level of the complementary quadtree in the appropriate order, the basic image contents can be understood with less data in the early period of transmission.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.8C
• /
• pp.810-823
• /
• 2005

The transmission of duplicate packets provides a great loss-resilience without undue time-delay in the video transmission over packet loss networks. But this method generally deteriorates the problem of traffic congestion because of the increased bit-rate required for duplicate transmission. In this paper, we propose an efficient packetization and duplicate transmission of video packets. The proposed method transmits only the video signal with high priority for each video macroblock that is quite small in volume but very important for the reconstruction of the video. The proposed method significantly reduces the required bit-rate for duplicate transmission. An efficient packetization method is also proposed to reduce additional packet overhead which is required for transmitting the duplicate data. The duplicated high priority data of the Previous video slice is transmitted as a Piggyback to the data Packet of the current video slice. It is shown by simulations that the proposed method remarkably improves the packet loss-resilience for video transmission only with small increase of redundant duplicated data for each slice.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.337-340
• /
• 2002

In data transmission at the digital satellite broadcasting systems, the delay and spread are caused whit receiving original signals from the transmitter in the receiver. So, there are some problems in data fast transmission. Also, transmitted signals ate received in stale of the combination of transmission delay and noise of channel. The affect of channel noise is reduced when increasing transmission power, but as signal interference due to the transmission delay and spread of channel increase in proportion to the transmission power, there is a problem in spite of increasing the transmission power. And there is the problem to add ISI(inter symbol interference) because the property of the channel is limo-varying due to relative moving in the transceiver Therefore, in this paper, a pulse shaping filter for the high-speed service in digital satellite broadcasting systems was designed and reduced the ISI.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.6
• /
• pp.85-92
• /
• 2010

In this paper, we propose a Clustering-based Cooperative Routing using OFDM (CCRO) for supporting transmission efficiency in mobile wireless sensor networks. The main features and contributions of the proposed method are as follows. First, the clustering method which uses the location information of nodes as underlying infrastructure for supporting stable transmission services efficiently is used. Second, cluster-based cooperative data transmission method is used for improving data transmission and reliability services. Third, OFDM based data transmission method is used for improving data transmission ratio with channel efficiency. Fourth, we consider realistic approach in the view points of the mobile ad-hoc wireless sensor networks while conventional methods just consider fixed sensor network environments. The performance evaluation of the proposed method is performed via simulation using OPNET and theoretical analysis. The results of performance evaluation show improvement of transmission efficiency.