• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.171-175
• /
• 1997

We have developed a remote diagnosis system using the LAN and MODEM which enables a routine check for a patient remotely. We used $LabVIEW^{TM}$ as the programing development tool and DAQ (Data Aquisition) board from National Instrument for data aquisition. The LAN card and MODEM are used for the transmission of patient's data. A patient data are aquired by DAQ board and signal processing is done by $LabVIEW^{TM}$, which is a graphical prgamming language. Two methods for the data of transmission. One is the Client-Server model using TCP/IP (Transmission Control Protocol / Internet Address) in the LAN (Local Area Network) Another is using MODEM to transmit the measured data from a patient. In this case, the data transmission is accomplished by the FTP (File Transfer Protocol).

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.4
• /
• pp.87-94
• /
• 2016

This paper proposes an energy transmission method to maximize energy efficiency of a based station. This method makes use of classification of service type to solve an inefficient use of transmission power, which is from exponential relationship between the legacy data throughput and transmission power. The proposed one is a way to find the most energy-efficiency points with the transmitted optimal amount of data on users in a base station of wireless network environment. For this, we propose EETA (Energy-Efficient Transmission Algorithm) which can control the amount of data and the holding time at the base station. As a result, the proposed method can improve the energy efficiency of about 10% compared to the legacy base station.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.6
• /
• pp.1229-1234
• /
• 2012

In this paper, we analyze the problems that the DDS middleware, which is a standard data-centric communication interface, uses the fixed packet transmission method by the pre-defined protocol for exchanging data packets. The packet transmission method selected in a fixed manner cannot handle appropriately the increasing of resource overhead in an environment where the load of the DDS network changes dynamically. If the load on the node and network exceeds the threshold, the performance of the packet transmission may be degraded rapidly. This results in a failure of ensuring the real-time characteristic of DDS middleware. To solve this problem, we propose the scheme of the adaptive packet transmission for adjusting the transmission method in real-time based on the overhead on the DDS network.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.79.6-79
• /
• 2002

We propose here sequential 2 methods for obtain information of current or potential data for power transmission line. One is a digital data transmission unit, this is, an output of a current sensor of power transmission line is digitalized by use of an easy asynchronous protocol. The unit has high speed transform rate, easy making header caused of consisting of only logic circuit. The other is, the output of the unit is transformed via LAN interface and displayed on a personal computer. We have confirmed remote measuring using the method for 100A and 240 A of the current information of power transmission line. Therefore we will be able to see a current waveform by use of internet at a cheep c...

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.6
• /
• pp.11-22
• /
• 1996

We address an issue of channel sharing among users by using a random assignment-transmitter-based (RA-T) spread-spectrum transmission scheme which permits the contention mode only in the transmission of a header while avoiding collision during the data packet transmission. Once the header being successfully received, the data packet is ready for reception by switching to one of programmable matched-filters. But the receoption may be blocked due to limited number of matched-filters so that this effect is taken into account in our analysis. For realistic analysis, we integrate detection performance at the physical level with channel activity at the link level through a markov chain model. We also consider an acknowledgement scheme to notify whether the header is correctly detcted and the data packet can be processed continuously, which aims at reducing the interference caused unwanted data transmission. It is shown that receiver complexity can be greatly reduced by choosing a proper number of RA codes at the cost of only a little throughput degradation.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.3
• /
• pp.252-258
• /
• 2012

This paper studies the power line communication method with splitting of power transmission interval in the small DC power system using pulse width modulation. The method divides the entire interval for transmitting power and data into a power transmission interval where power is supplied to a load and a data transmission interval where power from the power supply to the load is disconnected. The circuit is designed for the implementation to separate the power line from the power supply and load. The results of tests show the feasibility of the proposed power line communication method.

• Journal of Internet Computing and Services
• /
• v.8 no.2
• /
• pp.43-54
• /
• 2007

The effective power consumption is the primary issue in a sensor network which consists of the sensor nodes with limited battery power. So, most of the MAC protocols in sensor networks have been designed with the consideration of energy efficiency. Generally, these protocols make use of the listen and sleep mode periodically. However, this approach inevitably causes a long transmission delay on the data forwarding path, which is mainly resulted from the sleep time of the receiver node. This paper deals with a design of DT-MAC(Data Transmission centric MAC) protocol, with minimizes the data transmission delay while it forces each node to consume its energy efficiently. Thus, a node received a packet converts its remained sleep time to the pseudo_listen time, in which the node is able to transmit a packet. With benefit of the pseudo_listen period, the data transmission delay along with the data forwarding path will be shortened as much as it possible. Therefore, DT-MAC protocol is very suitable to the various applications which require a real time sensing data such as disaster and fire alarm.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.1
• /
• pp.13-24
• /
• 1984

This paper presents the measurements and analyses of transmission qualities of the existing urban and toll public switching telephone network (PSTN) for the purllose of opening it to data transmission. In the tests, random noise and impulsive noise occuring on the telephone network are investigated and bit error rate and block error rate representing the transmission qualities on the existing telephone network are measured. We recommend the fastest practical data transmission speed on the network and investigate a possibility of opening the public switching telephone network (PSIN) to the data transmission based on the above measurements.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.6
• /
• pp.19-28
• /
• 1995

In this paper, measured iris transmission loss data and simulated data by using 3-dimension full-wave analysis S/W are presented and compared with Marcuvitz's theory. And by using measured iris data, dual-mode narrow-band channel filters can be successfully implemented. This paper shows that there is severe difference between the transmission loss of iris calculated by using Marcuvitz's equation to calculate iris dimension, if the length of slot iris is longer than .lambda./.pi., and in the long urn the response of channel filter is distorted. Experimental result shows that the characteristic response of implemented channel filter by using the iris transmission loss graph presented here matches well the design specfications. In conclusion, iris transmission loss measurement method will be very useful to design channel filter.

• Journal of Information Technology Services
• /
• v.9 no.2
• /
• pp.151-161
• /
• 2010

Recently, as the era of ubiquitous has arrived, an infrastructure for the short-distance wireless communication has been extended socially, and thus a variety of services are being proposed. The Multimedia Contents Delivery System using the ZigBee, in particular, has an important stance in enlargement of a variety of services in the aspect of individual-oriented service support though Wireless Personal Area Network (WPAN). Nonetheless, the ZigBee, or the IEEE 802.15.4 Standard, has many restrictions on the Multimedia Contents Delivery System due to the low data transport rate. In order to improve the ZigBee which presents a limit on the transport rate at the IEEE 802.15.4 Standard, this thesis has designed the burst mode which is a method of transmitting a certain amount of data in block units at a high speed without any stoppage until the completion of the transmission. Also, to provide a Multimedia Contents Delivery Service with an application of the normal data transmission mode, it improved the transmission performance of the ZigBee. In addition, for the Multimedia Contents Delivery Service under the ubiquitous environment, it designed and implemented a broadcasting Multimedia Contents Delivery System based on the ZigBee to conduct a comparative analysis on the data transmission performance according to the transmission method.